Jump to content
Why become a member? ×

Soundmen rant...


Ruck

Recommended Posts

3 hours ago, E sharp said:

I took my daughter to her first proper gig last year - her choice was Download .

I would say around 80% of the bands had a shockingly bad sound - I've no idea what these guys do

In fairness, mixing at a festival and outside isn't the easiest job in the world

  • Like 1
Link to comment
Share on other sites

Decent venue with a decent PA, this shouldn’t happen. Especially if the guy is an experienced sound engineer. If there are restrictions, they should have been explained, or preferably resolved before hand. It’s not an easy job, but if you don’t want it, then don’t do it, or you’ll get labelled as a bad engineer. 

Edited by Angelus
Link to comment
Share on other sites

1 hour ago, Roger2611 said:

Part of the problem seems to be the quickness of a soundcheck, if you are lucky enough to get one, as a support act it's usually "bass" I hit two notes "thank you, Guitar" and that's my soundcheck!

This is about right though, because, unless I hear something that obviously and immediately requires some remedial tweaking, I want to quickly flash through all inputs to make sure I've got a good clean signal I can work with, then hear things in context with the band playing together before I make any serious sonic decisions and start to tweak. No use me arsing about with things in isolation if it isn't going to sit in the mix right when the rest of the band start.

  • Like 1
Link to comment
Share on other sites

1 minute ago, mike257 said:

This is about right though, because, unless I hear something that obviously and immediately requires some remedial tweaking, I want to quickly flash through all inputs to make sure I've got a good clean signal I can work with, then hear things in context with the band playing together before I make any serious sonic decisions and start to tweak. No use me arsing about with things in isolation if it isn't going to sit in the mix right when the rest of the band start.

dont blame the sound guy

Link to comment
Share on other sites

4 minutes ago, mike257 said:

This is about right though, because, unless I hear something that obviously and immediately requires some remedial tweaking, I want to quickly flash through all inputs to make sure I've got a good clean signal I can work with, then hear things in context with the band playing together before I make any serious sonic decisions and start to tweak. No use me arsing about with things in isolation if it isn't going to sit in the mix right when the rest of the band start.

some you win some you loose hey ho

Link to comment
Share on other sites

1 hour ago, Ruck said:

I just trust in the soundman too much.

Think most are usually ok to excellent but its always best to check. I've been doing it since i used to hire out PA's systems in 80's. Just habit from mixing our own band sounds all those years ago and i still do it without thinking.

Dave

Link to comment
Share on other sites

33 minutes ago, Ruck said:

I'd just wish they'd say something like "Hey man is your sound suppose to be a undefined drone of sub bass?" 

Thing is, as they insisted on pre-eq it was their job to then eq it to fit in the mix properly. 

This always amazes me, bands - usually - work as a collective to get their overall sound, then someone on a desk with no knowledge of that sound decides to maintain the sound of all the instruments apart from one - and more often than not it’s the bass. And more often than not what they do to the bass ends up in a sludgy booming subby mess. 

  • Like 1
Link to comment
Share on other sites

6 hours ago, hiram.k.hackenbacker said:

They get what they're given from me, which is always Post.

 

When there's PA to take care of the bass, my amplifier becomes my monitor really. As such, I want to be able to tweak EQ to help me onstage without worrying that I'm damaging the mix FOH. 

For that reason, I always give them PRE. I like the flexibility I get that way onstage, and the sound engineer already gets *my* sound, since I tend to get the sound I want between the bass and any pedals I may be using, I do not rely on the amp for that.

  • Like 2
Link to comment
Share on other sites

I saw Little Feat at the Shepherds Bush Empire and when they started they sounded perfect, just like the records. I was standing by the desk and as the set progressed the sound got worse and worse. I watched their sound guy turning every knob on the desk for the whole gig! It sounded so bad! How could someone like that get it so wrong!

The acoustic duo I was in did support for Paul Jones in a big echoing church, and his sound man got us the best sound I've heard in years. On the sound check, he could spot and name the frequency that was causing trouble, then EQ it perfectly. He was worth double what they were paying him!

Sadly, most of my FOH experience is in the past, but I have always found the sound guy, introduced myself, shaken his hand and, assuming he's got the time, had a chat. After, thank him and shake hands again.

I always tell them they're getting post EQ from my amp. Never had a fight about that.

I have only had 1 bad sound on a gig (at a festival, a huge boom on most of the notes) and for some reason it took the guy 20 mins to fix it. I didn't thank him after that! Otherwise I've been pretty lucky, because no-one's given me a sound I could complain about.

 

 

Link to comment
Share on other sites

I’m another who likes to go & have a friendly chat with the soundy. Not just for the gig, but to expand my contacts, as you never know when they might be putting something on in the future, etc. 

I’ve had it good so far, as every sound guy has said they love my tone & hardly touch the EQ, just pop some compression on it. 

I feel for Ruck having the soundy make a mess. Maybe he’s a dub reggae soundy?

Link to comment
Share on other sites

1 hour ago, PaulWarning said:

the main trouble I encounter with FOH sound is a muddy sub bass so I always cut anything below 50Hz before the signal gets sent to the desk.

 

Indeed! I usually have this on my GK 1001RB but unfortunately was Pre-EQ DI. I run the Flea EQ: Lows: 8 o'clock Low Mids: 9 o'clock High Mids: 11 o'clock and Highs at Noon. Pre-Shape and Presence 10 o'clock though. This with my Fender Precision Deluxe and Barefaced Big Twin II is the tightest punchiest lows Ive ever managed. Even got an Auralex pad to stop the booming on hollow stages, seems to work a treat.

Link to comment
Share on other sites

8 hours ago, Ruck said:

Indeed! I usually have this on my GK 1001RB but unfortunately was Pre-EQ DI. I run the Flea EQ: Lows: 8 o'clock Low Mids: 9 o'clock High Mids: 11 o'clock and Highs at Noon. Pre-Shape and Presence 10 o'clock though. This with my Fender Precision Deluxe and Barefaced Big Twin II is the tightest punchiest lows Ive ever managed. Even got an Auralex pad to stop the booming on hollow stages, seems to work a treat.

I tend to run my GK1001RBii almost flat thru a Berg HT322 with contour 9 o clock and presence off. I've never had any probs with heavy lows altho i tend to use a Jazz.

Dave

Link to comment
Share on other sites

two recent experiences from depping before Christmas, playing reasonable sized venues.  We took our own sound people - one to each gig - the band do it as standard, and use people who know how the band, and the extreme metal genre, should sound.

At the first the in-house guy did all the other bands and they all sounded excellent, all the more impressive because it was largely line checks before they went on.  I'm told that we sounded great, and the guy we took is a bass player in another band (and guitarist in others) and really knew his stuff.

At the second the sound guy that we brought did the support bands, so only the co-headliners had the in-house person.  Even they commented that they had the worst sound of the evening.  Have to say, I didn't spot them sounding bad, just maybe not as good/clear as everybody else.

I do have some sympathy in that the sound-person does have to cope with a huge amount of different genres, and what's right for one may be completely wrong for one that is even slightly different (for example, we were a progressive death metal band, the co-headliners were straight forward thrash metal).  I've done plenty of gigs leaving it all to the soundman and had reports of it not sounding great.  However, my trick is to get all of the eq in first, and I specifically use a Tech 21 VT Bass and an Ampeg SCR-DI which between them do a pretty good impression of the SVT sound that I would only otherwise get if I've brought my SVT and the amp is mic'd (and that never happens).

Link to comment
Share on other sites

Sound guys almost always ask for pre-EQ. I always say "Sure..." and then send them a post- EQ signal.

They then often remark on what a great bass tone I have sent to their desk...... and how little they need to do to adjust for the room. Quel surprise!

Edited by cetera
  • Like 1
  • Haha 2
Link to comment
Share on other sites

42 minutes ago, cetera said:

Sound guys almost always ask for pre-EQ. I always say "Sure..." and then send them a post- EQ signal.

They then often remark on what a great bass tone I have sent to their desk...... and how little they need to do to adjust for the room. Quel surprise!

Much sneakiness :laugh1:

  • Haha 1
Link to comment
Share on other sites

We played a gig in a tent last year... we provided the PA and the boyfriend of one of our vocalists did the knob-twiddling duties, first time he'd done it for us. He's a recent sound engineering/production graduate. I took a walk out front during the set, and oh my word the FOH sound was sublime. We're a 12-piece band, lots of horns and stuff, so mixing us is not a small task, but I could hear everything clearly and in lovely detail and my tone was perfect. I could have kissed him. I'm really hoping he comes along as our engineer in future.

 

  • Like 4
Link to comment
Share on other sites

One of the reasons I have a John East Pre amp fitted on my Jazzes, is for this very reason. I boost the low mid, significantly, and it means the bass cuts through really well when it's through the FOH PA. It makes it easier for the sound engineer to provide a decent clear bass sound out front, rather than subsonic mush. 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...