Delberthot Posted July 23, 2007 Share Posted July 23, 2007 I recently bought a 1973 Telecaster bass with the big humbucker that had been poorly refinished some time ago. I thought it would be a good idea to refinish it properly. I also thought that it might be a good idea to post my progress here to show anyone else who is interested how to do it (or not to do it) The bass as it arrived to me looked like this: Everything else at first glance seems to be original. There's a split in the wood where the bullet truss rod comes out at the top of the headstock. its probably been there for years and was a problem on the early ones where the wood at that section wasn't thick enough. I plan on sealing the crack with superglue as it is invisible to minimise any further splitting. The next step was to carefully take all of the hardware off. I began by removing the strings and then the neck. The first odd thing is that there is no wood between the butt of the neck and the humbucker. It is amazing how big and heavy this pickup is. Once I had removed the bridge, I was able to pull the earth wire back through and take the scratchplate off. I then unscrewed the nut holding the jack to the cup so that i could lift the whole lot clear. All the parts are in separate containers so that they do not go missing the second odd thing was that someone had shielded the control cavity but hadn't done it properly so that will be going. The next step will be to sand down the body and fill any dings in the wood. I'll probably take a couple of weeks to do this as i will only have time after work to do it. For anyone interested in what the final finish will be: I am using nitro to paint it to make it more authentic. White primer, Daphne Blue colour and clear laquer top coat Quote Link to comment Share on other sites More sharing options...
The Funk Posted July 24, 2007 Share Posted July 24, 2007 (edited) I'm scared. It looks/looked awesome. Edited July 24, 2007 by The Funk Quote Link to comment Share on other sites More sharing options...
Pbassred Posted July 25, 2007 Share Posted July 25, 2007 It looks like someone has been at it before, so I wouldn't worry. certianly not about the body. A pro sprayer will enjoy makeing a good job of that. Quote Link to comment Share on other sites More sharing options...
john_the_bass Posted July 25, 2007 Share Posted July 25, 2007 paint it yellow! looks like someone drilled a very small hole at the end of the split on the neck to stop it spreading further Quote Link to comment Share on other sites More sharing options...
wateroftyne Posted July 25, 2007 Share Posted July 25, 2007 These are monstrous basses. I wish I'd kept mine... JUst in case you find it useful - there's a simple mod you can do by unscrewing two of the polepieces from the pickup.. I did it to mine and, although the signal still sounded as big as a house, it was a little more controllable and a little more defined. Quote Link to comment Share on other sites More sharing options...
Delberthot Posted July 25, 2007 Author Share Posted July 25, 2007 the pictures do make it look good but its as rough as the proverbial badgers rear end. More dings than big ben.. etc etc............. Which poles to you remove as I may try this first? Thanks Quote Link to comment Share on other sites More sharing options...
99ster Posted July 26, 2007 Share Posted July 26, 2007 How about black for the new colour? I've got a black one (like the guy from 'The Hives') - & it looks great! And yes - the sound is absolutely monstrous from that humbucker! [attachment=1384:74_tele2_front.jpg] Quote Link to comment Share on other sites More sharing options...
The Funk Posted July 27, 2007 Share Posted July 27, 2007 But you should keep the grain showing through if possible. Maybe a refinish in the same sort of colour... or natural? Quote Link to comment Share on other sites More sharing options...
neepheid Posted July 27, 2007 Share Posted July 27, 2007 Please don't "relic" it Quote Link to comment Share on other sites More sharing options...
wateroftyne Posted July 27, 2007 Share Posted July 27, 2007 [quote name='Delberthot' post='37013' date='Jul 25 2007, 08:14 PM']Which poles to you remove as I may try this first? Thanks[/quote] It's been a while, but IIRC... Take the pup out, and there should be two polepices with screw heads accessible from the bottom. Unscrew 'em, and take them out. Bob's your uncle. Quote Link to comment Share on other sites More sharing options...
Beedster Posted July 27, 2007 Share Posted July 27, 2007 Lovely bass, I can see why you want to refin it, but I'd keep it as is. It's looks like it's got history and tons of (probably bad) character. Good luck either way Chris Quote Link to comment Share on other sites More sharing options...
paul, the Posted July 27, 2007 Share Posted July 27, 2007 I didn't know how cool these basses were until I found out that George Porter Junior played one. Keep it natural, it looks great and very unique. Although a Californian yellow would be pretty cool. Quote Link to comment Share on other sites More sharing options...
99ster Posted July 27, 2007 Share Posted July 27, 2007 (edited) [quote name='paul, the' post='37782' date='Jul 27 2007, 12:57 PM']I didn't know how cool these basses were until I found out that George Porter Junior played one. Keep it natural, it looks great and very unique. Although a Californian yellow would be pretty cool.[/quote] Yeah.... It don't get much cooler than this (though George is playing a '68 Tele bass here - or maybe even a really old 50's Precision?): [attachment=1405:george7.jpg] Edited July 27, 2007 by 99ster Quote Link to comment Share on other sites More sharing options...
paul, the Posted July 27, 2007 Share Posted July 27, 2007 [quote name='99ster' post='37916' date='Jul 27 2007, 05:56 PM']Yeah.... It don't get much cooler than this (though George is playing a '68 Tele bass here - or maybe even a really old 50's Precision?): [attachment=1405:george7.jpg][/quote] He played Tele basses and Precisions as well as a holow-bodied EB-2 through a Bassman (in the old days). Quote Link to comment Share on other sites More sharing options...
Rodders Posted July 29, 2007 Share Posted July 29, 2007 I say keep it natural it looks nice just re-lacquer it ! Rodders Quote Link to comment Share on other sites More sharing options...
Delberthot Posted August 5, 2007 Author Share Posted August 5, 2007 here she is after the first sanding. That's as far as i can go until i get some sand and sealer onto it. most of the dark parts are needing filled before i can can sand any smoother. Quote Link to comment Share on other sites More sharing options...
Bass_Junkie Posted August 5, 2007 Share Posted August 5, 2007 i really liked that finish. Quote Link to comment Share on other sites More sharing options...
Mike Posted August 6, 2007 Share Posted August 6, 2007 Well, I'm hooked. Best of luck with the refin. I love these basses. Quote Link to comment Share on other sites More sharing options...
Delberthot Posted August 6, 2007 Author Share Posted August 6, 2007 On the underside of the pickup are 4 polepieces with screw heads Do i take 2 from one side or one from each? Quote Link to comment Share on other sites More sharing options...
wateroftyne Posted August 6, 2007 Share Posted August 6, 2007 [quote name='Delberthot' post='42181' date='Aug 6 2007, 09:22 PM']On the underside of the pickup are 4 polepieces with screw heads Do i take 2 from one side or one from each?[/quote] It's comin' back to me now! Take all four out... they just screw right out. Give it a go and see what you think - it's easy enough to reverse. If you do put them back in, don't overtighten them as they'll push into the top plate and make a little bump. Quote Link to comment Share on other sites More sharing options...
Delberthot Posted August 6, 2007 Author Share Posted August 6, 2007 Cool. thanks for that. I'd really like to be able to keep the original look of the bass Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.