Jabba_the_gut Posted January 10, 2019 Share Posted January 10, 2019 I've still got some work to do to finish off a couple of build from last year but need to clear the garage of all the junk from having my kitchen done. In the meantime, I started mocking up a few bits for a new build. Got a few ideas but nothing concrete yet; 4 or 5 string, hollow or solid, 1 pickup or 2. Got some more wood on order but in the meantime... I also put a scratchplate on top of a body I'm currently building and quite liked the look of it. It obviously doesn't fit but I like the contrast between the white plate and the spalted beech. Anyone else got any thoughts to the look of this? 4 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted January 11, 2019 Share Posted January 11, 2019 10 hours ago, Jabba_the_gut said: I've still got some work to do to finish off a couple of build from last year but need to clear the garage of all the junk from having my kitchen done. In the meantime, I started mocking up a few bits for a new build. Got a few ideas but nothing concrete yet; 4 or 5 string, hollow or solid, 1 pickup or 2. Got some more wood on order but in the meantime... I also put a scratchplate on top of a body I'm currently building and quite liked the look of it. It obviously doesn't fit but I like the contrast between the white plate and the spalted beech. Anyone else got any thoughts to the look of this? Great to see you kicking off a new one! I quite like the look of a scratchplate on a bass - especially light or white plates. It does fundamentally change the visual 'feel' though so usually depends on the bass itself whether it works or not. To my own eye, but it's a personal thing, the above would enhance the same bass built without an f hole but is a bit of a 'culture clash' on the same top with the f hole. Dunno, really. Nice thing is that you can fit a plate with light double sided tape so just try it - totally reversible. With long shaft pots, you can do the same with the controls plate - the pot nuts and washers will hold the plate on. It would be an interesting 'with and without' comparison on a finished bass Quote Link to comment Share on other sites More sharing options...
Frank Blank Posted January 11, 2019 Share Posted January 11, 2019 I’m with @Andyjr1515 when it comes to the ‘clash’ between the scratch plate and the f hole. I keep imagining the bass in the bottom pic with another f hole just where the curved metal (is it called a control plate?) piece is. Quote Link to comment Share on other sites More sharing options...
Jabba_the_gut Posted January 11, 2019 Author Share Posted January 11, 2019 5 hours ago, Andyjr1515 said: I quite like the look of a scratchplate on a bass - especially light or white plates. It does fundamentally change the visual 'feel' though so usually depends on the bass itself whether it works or not. To my own eye, but it's a personal thing, the above would enhance the same bass built without an f hole but is a bit of a 'culture clash' on the same top with the f hole. Dunno, really. 4 hours ago, Frank Blank said: I’m with @Andyjr1515 when it comes to the ‘clash’ between the scratch plate and the f hole. I keep imagining the bass in the bottom pic with another f hole just where the curved metal (is it called a control plate?) piece is. I know what you mean about the 'f' hole! I suppose part of my question was also around using something other that a plain wood/colour top with a scratch plate - it almost seems a shame to cover the wood but I quite liked the contrast. As you say, might try a mock up when this is progressed further!! Cheers 1 Quote Link to comment Share on other sites More sharing options...
Frank Blank Posted January 11, 2019 Share Posted January 11, 2019 1 minute ago, Jabba_the_gut said: I know what you mean about the 'f' hole! I suppose part of my question was also around using something other that a plain wood/colour top with a scratch plate - it almost seems a shame to cover the wood but I quite liked the contrast. As you say, might try a mock up when this is progressed further!! Cheers This maybe a stupid (if I could build instruments I wouldn't suggest it) but I always hanker after a scratch plate made of wood, or at least appearing like it, in a different shade but with the same finish, still showing the grain, is that odd? Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted January 11, 2019 Share Posted January 11, 2019 3 minutes ago, Jabba_the_gut said: I know what you mean about the 'f' hole! I suppose part of my question was also around using something other that a plain wood/colour top with a scratch plate - it almost seems a shame to cover the wood but I quite liked the contrast. As you say, might try a mock up when this is progressed further!! Cheers I think scratchplates can look very good even with fancy woods. 1 Quote Link to comment Share on other sites More sharing options...
Christine Posted January 11, 2019 Share Posted January 11, 2019 I'm liking the version with the two Delanos, very wantable Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted January 13, 2019 Share Posted January 13, 2019 On 11/01/2019 at 14:15, Christine said: I'm liking the version with the two Delanos, very wantable +1 the designer in me would proportially mirror the pickup shape in the lower horn too Quote Link to comment Share on other sites More sharing options...
Jimothey Posted January 13, 2019 Share Posted January 13, 2019 On 10/01/2019 at 21:04, Jabba_the_gut said: I've still got some work to do to finish off a couple of build from last year but need to clear the garage of all the junk from having my kitchen done. In the meantime, I started mocking up a few bits for a new build. Got a few ideas but nothing concrete yet; 4 or 5 string, hollow or solid, 1 pickup or 2. Got some more wood on order but in the meantime... I also put a scratchplate on top of a body I'm currently building and quite liked the look of it. It obviously doesn't fit but I like the contrast between the white plate and the spalted beech. Anyone else got any thoughts to the look of this? My vote would go to 1 MM pickup with pickguard!! I think that would look killer!! 😀 Quote Link to comment Share on other sites More sharing options...
Jabba_the_gut Posted January 13, 2019 Author Share Posted January 13, 2019 Cheers for the comments - lots of ideas! I'm going to look at the scratchplate a bit further. I've got another couple of tops and some swamp ash due this week which I'm looking forward to receiving. 1 Quote Link to comment Share on other sites More sharing options...
fleabag Posted January 17, 2019 Share Posted January 17, 2019 Looking good Jab Quote Link to comment Share on other sites More sharing options...
wrinkleygit Posted January 18, 2019 Share Posted January 18, 2019 Naked for me every time, mike Quote Link to comment Share on other sites More sharing options...
Jabba_the_gut Posted January 24, 2019 Author Share Posted January 24, 2019 (edited) On 13/01/2019 at 21:58, Jabba_the_gut said: I've got another couple of tops and some swamp ash due this week which I'm looking forward to receiving. Well I would have if Hermes hadn't lost it!! A piece of buckeye burl and some swamp ash for a body - not exactly a jiffy bag......grrrr. Really not happy. Edited January 24, 2019 by Jabba_the_gut 3 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted January 24, 2019 Share Posted January 24, 2019 51 minutes ago, Jabba_the_gut said: Well I would have if Hermes hadn't lost it!! A piece of buckeye burl and some swamp ash for a body - not exactly a jiffy bag......grrrr. Really not happy. Blast! That's a b****r! Quote Link to comment Share on other sites More sharing options...
fleabag Posted January 25, 2019 Share Posted January 25, 2019 On 24/01/2019 at 10:40, Andyjr1515 said: Blast! They're a bunch of a b****rs! Fixed Lets call a spade a spade 1 Quote Link to comment Share on other sites More sharing options...
Jabba_the_gut Posted February 13, 2019 Author Share Posted February 13, 2019 The replacement wood turned up today - think this will make a very nice top Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted February 13, 2019 Share Posted February 13, 2019 Ooooo - that looks nice. The figuring will also really burst through when the finish goes on Quote Link to comment Share on other sites More sharing options...
Guest Marcoelwray Posted February 13, 2019 Share Posted February 13, 2019 I would go for the 1 pickup Delano Xtender config Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.