80`s BURNS Bass (Made in Japan, Neck-through), £550 £550

[Funky Dave]

80`s BURNS Bass (Made in Japan, Neck-through), £550

Hello! I sell a extremly rare BURNS Bass (Made in Japan, Neck-through). Made in Morridiara Factory, Japan. Sometimes these instruments appear under "Morris Global Sound" trademark.
Body design similar to early Alembic/J&D bases. Very rare model, not possible to find similar bass in web. Built in in early 80`ties, no serial. In good condition, few scratches on body.
Very good sustain and unique vintage tone. Absolutelly NO any hum or noise in headphones in active and passive mode.

Neck: Neck-through, 5-piece walnut/flamed maple
Body: 2 alder body with walnut top/bottom.
Weight less than 4 kg.
34” scale.
Brass nut.
20 frets. Frets are 30-40% wear remaining.
String spacing bridge about 18.5-19 mm. It is Warvick bridge, and it is possible to adjust spacing/height depending on your needs.

Original pickups and pots was replaced by luther with new:

Pickups: Seymour Duncan Passive Soapbar set SSB-4s (ceramic magnets):
https://www.seymourduncan.com/pickup/passive-soapbar-set-phase-ii?__uuid_ref=5bb5e210995e4?__uuid_ref=5bb5e21099628

Preamp: Glockenklang 3 band EQ, active/passive switching by push/pull volume pot.
https://www.glockenklang.de/en/products/products_bass.htm

This instument is very good for recording as well as live!

Instrument comes with big hardcase.

Located in Riga, Latvia.
Shipping to EU/UK without problem.
Price: £550 (shipping included).

[Funky Dave]

Up

[Bassassin]

You could have bumped your original post.

It contains relevant information.

[Funky Dave]

Still selling