Jazz series wiring advice

[DevonDel]

Some advise from someone cleverer than I.

I want to wire my ‘92 MIJ Jazz in series l using just the front volume knob for both pickups and keeping the tone knob as is.

I’ve looked at various wiring diagrams and I thought it looked easy until I opened up my bass and got scared.

Can anyone give me an idiots guide on what wires I need to solder and where.

 

 

Edited January 20, 2019 by DevonDel

[T-Bay]

.......

Edited January 20, 2019 by T-Bay

[DevonDel]

Shame my German isn’t better

[T-Bay]

34 minutes ago, DevonDel said:

Shame my German isn’t better

The Diagrams are all clear and colour coded anyway so no German needed. I have removed the link as it’s obviously no use to you.

[KiOgon]

Leave the neck white + where it is and the bridge black where it is. Take the neck black off and the bridge white off, join them together and tape up. Job done.

[DevonDel]

On 20/01/2019 at 17:50, KiOgon said:

On 20/01/2019 at 17:50, KiOgon said:

Leave the neck white + where it is and the bridge black where it is. Take the neck black off and the bridge white off, join them together and tape up. Job done.

Cheers KiOgin, one last question. The neck black has three wires? Two coming from the pickup and one going to a copper plate, do I connect all three of those to the bridge white?

 

[KiOgon]

@DevonDel No only the black from the pick up coil to the bridge white. The wire from the copper plate must go to earth, on the pot body where it already is  with the other earths.

John