ianrendall Posted January 22, 2019 Posted January 22, 2019 Is there such a thing? I’ve recently replaced the 0.1uf cap in my P bass for a 0.47uf cap. While I do like the sound of the new cap, I also like the sound of the old one. Does a knob exist with both a tone control and a selector? Perhaps a push-pull? I know I could put in a multi-way switch but I don’t want to drill any holes in the scratchplate. Quote
BassBunny Posted January 22, 2019 Posted January 22, 2019 You can certainly get a pot with a push/pull switch. Quote
ianrendall Posted January 22, 2019 Author Posted January 22, 2019 (edited) 1 hour ago, BassBunny said: You can certainly get a pot with a push/pull switch. Found one! Useful article and diagram too. https://www.fralinpickups.com/2017/11/08/november-mod-month-2-tone-caps-1-push-pull-pot/ Edited January 22, 2019 by ianrendall Quote
BassBunny Posted January 23, 2019 Posted January 23, 2019 AxesrUs do 2 versions that would fit the bill. https://www.axesrus.co.uk/Medium-Shaft-PushPush-Alpha-Pots-p/medpushpushalpha.htm https://www.axesrus.co.uk/Medium-Shaft-PushPull-Alpha-Pots-p/medpushpullalpha.htm Quote
ianrendall Posted January 23, 2019 Author Posted January 23, 2019 1 hour ago, BassBunny said: AxesrUs do 2 versions that would fit the bill. https://www.axesrus.co.uk/Medium-Shaft-PushPush-Alpha-Pots-p/medpushpushalpha.htm https://www.axesrus.co.uk/Medium-Shaft-PushPull-Alpha-Pots-p/medpushpullalpha.htm Thanks for that. Yes I have found a number of sources but I do have two concerns. 1. The pots on my P are of the solid shaft variety held in place with a grub screw. I cannot find any push pulls with a solid shaft. 2. Is the control cavity deep enough to accept the depth of the push pull pot. I’d have to get my screwdriver out for that one I guess. Quote
BassBunny Posted January 23, 2019 Posted January 23, 2019 1, shouldn't be an issue. You can use the same control knob. Just ensure the grub screw is lined up with the split in the shaft. 2, yep, that could be a problem. Quote
ianrendall Posted January 23, 2019 Author Posted January 23, 2019 1 minute ago, BassBunny said: 1, shouldn't be an issue. You can use the same control knob. Just ensure the grub screw is lined up with the split in the shaft. 2, yep, that could be a problem. Cheers @BassBunny! I could put in a small metal shim in the split to create a faux solid shaft. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.