EBS_freak Posted February 1, 2019 Share Posted February 1, 2019 Side loaded is so unconventional it just seems wrong. How easily can the encoder knob be unsoldered and put onto a flying cable... because at the end of the day, it is that which is the real problem. Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 1, 2019 Author Share Posted February 1, 2019 I'm officially taking orders for the Future compact. If you emailed me already you should have received an email by now with the details on ow to make an order. If you want to make an order please email to [email protected] with "future impact rehousing" in the subject to express your interest, and ill let you know how to order. Thanks Quote Link to comment Share on other sites More sharing options...
Hugsonic Posted February 1, 2019 Share Posted February 1, 2019 27 minutes ago, GisserD said: So I've been looking into this today, and i dont think its going to work. Not really. The thing is... due to the way the circuit board is internally right against the wall, i cant recess the footswitches like i can on the sides. so the switches will have to stick out further, which elongates the footprint almost to the point where you could just have them sticking out the top like the 1st "Future compact" design. so it kind of makes this variant redundant. The only reason to have the switches there would be to have it on the front row of the board, and therefore operated by the toe. But i don't want to dictate where people put a pedal, so it's not realy a valid reason. Therefore I will be sticking to the side loaded switches for the super compact. Thanks for giving this a go. Quote Link to comment Share on other sites More sharing options...
Teebs Posted February 1, 2019 Share Posted February 1, 2019 That is amazing! Sooo very cool Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 3, 2019 Author Share Posted February 3, 2019 On 01/02/2019 at 15:58, Hugsonic said: Thanks for giving this a go. I did make one, it's not too bad, but would need to be on the front row. 1 Quote Link to comment Share on other sites More sharing options...
Hugsonic Posted February 3, 2019 Share Posted February 3, 2019 Cool, but I see what you mean about them sticking out. Kicking the switch could also lead to trouble, like kicking the encoder clean off! Good call on the side mount. Cant wait to get mine. The FI has always forced some compromises due to its size so a board review is coming soon. Really want to get down to a metro 20 from my jr. Quote Link to comment Share on other sites More sharing options...
Finbar Posted February 4, 2019 Share Posted February 4, 2019 I’m not keen on the front switches - I think it eliminates almost all of the space saving from just keeping the slightly larger enclosure. Side seems more reasonable from that point of view Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 4, 2019 Author Share Posted February 4, 2019 1 minute ago, Finbar said: I’m not keen on the front switches - I think it eliminates almost all of the space saving from just keeping the slightly larger enclosure. Side seems more reasonable from that point of view yep. On 01/02/2019 at 15:30, GisserD said: So I've been looking into this today, and i dont think its going to work. Not really. The thing is... due to the way the circuit board is internally right against the wall, i cant recess the footswitches like i can on the sides. so the switches will have to stick out further, which elongates the footprint almost to the point where you could just have them sticking out the top like the 1st "Future compact" design. so it kind of makes this variant redundant. The only reason to have the switches there would be to have it on the front row of the board, and therefore operated by the toe. But i don't want to dictate where people put a pedal, so it's not realy a valid reason. Therefore I will be sticking to the side loaded switches for the super compact. Quote Link to comment Share on other sites More sharing options...
EBS_freak Posted February 4, 2019 Share Posted February 4, 2019 Just now, Finbar said: I’m not keen on the front switches - I think it eliminates almost all of the space saving from just keeping the slightly larger enclosure. Side seems more reasonable from that point of view I haven't said anything yet... but I don't get the side switches either. Am I missing something, but not being able to push it up close to an adjacent pedal on a pedal board seems to miss the point. And front kicking a pedal board seems a bit of a nightmare if you have a strong foot and light pedal board... or am I missing something? Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted February 4, 2019 Share Posted February 4, 2019 Correct if I am wrong but aren’t the side switches there as a personal preference to use your hands to change with it at desk height? Makes compete sense that way to tinker with out having to bend over Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 4, 2019 Author Share Posted February 4, 2019 4 minutes ago, EBS_freak said: I haven't said anything yet... but I don't get the side switches either. Am I missing something, but not being able to push it up close to an adjacent pedal on a pedal board seems to miss the point. And front kicking a pedal board seems a bit of a nightmare if you have a strong foot and light pedal board... or am I missing something? Im offering 2 different designs. Both of which will appeal to very different types of pedalboard. 1.The future compact (top switches) will appeal to most. this is just a smaller version of th FI. 2. The super compact appeals to those who use a midi switcher and seldom need access to the switches at all!! Therefore having them tight against another pedal isn't really an issue. If the user chooses to they could just leave the switches inside the housing. 1 Quote Link to comment Share on other sites More sharing options...
Finbar Posted February 4, 2019 Share Posted February 4, 2019 I mean I’m not the biggest fan of side switches either, but as the project is for strictly rehousing and not modding, I understand the choice when it comes to the aim of getting the smallest possible form factor. 1 Quote Link to comment Share on other sites More sharing options...
EBS_freak Posted February 4, 2019 Share Posted February 4, 2019 Just now, Finbar said: I mean I’m not the biggest fan of side switches either, but as the project is for strictly rehousing and not modding, I understand the choice when it comes to the aim of getting the smallest possible form factor. OP stated - "So i formulated a plan to Design and 3D print an enclosure, into which i can re-house the innards of the Future impact, to make a much more pedalboard friendly footprint." So I'm now completely lost. Quote Link to comment Share on other sites More sharing options...
ped Posted February 4, 2019 Share Posted February 4, 2019 1 minute ago, EBS_freak said: OP stated - "So i formulated a plan to Design and 3D print an enclosure, into which i can re-house the innards of the Future impact, to make a much more pedalboard friendly footprint." So I'm now completely lost. It’s evolved along the way. The FC archives the original aim and the other is just another option for fun 1 Quote Link to comment Share on other sites More sharing options...
EBS_freak Posted February 4, 2019 Share Posted February 4, 2019 1 minute ago, GisserD said: 2. The super compact appeals to those who use a midi switcher and seldom need access to the switches at all!! Therefore having them tight against another pedal isn't really an issue. If the user chooses to they could just leave the switches inside the housing. I don't get this either - you aren't saving any space (the other existing knobs are making the unit the height that it is anyway), or gaining ease of function? PS not being awkward, I'm just failing to see the benefit of the front or side mounted buttons... and wanting to know if I'm not seeing something that other people are. Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 4, 2019 Author Share Posted February 4, 2019 (edited) i 8 minutes ago, Cuzzie said: Correct if I am wrong but aren’t the side switches there as a personal preference to use your hands to change with it at desk height? Makes compete sense that way to tinker with out having to bend over i haven't really considered desktop use at all on the basis that there's usually not a premium for space on a desk. The important thing to note here is that the side mounted buttons will only ever be pressed by hand. and very rarely by users that switch with midi. (like me) Edited February 4, 2019 by GisserD Quote Link to comment Share on other sites More sharing options...
EBS_freak Posted February 4, 2019 Share Posted February 4, 2019 2 minutes ago, ped said: It’s evolved along the way. The FC archives the original aim and the other is just another option for fun I read through the thread again and it just seemed to tangent and I didn't really understand why. OK. I'm up to speed again on that front.. just confused still! 😛 Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 4, 2019 Author Share Posted February 4, 2019 5 minutes ago, ped said: It’s evolved along the way. The FC archives the original aim and the other is just another option for fun this . If you don't like side buttons, then its OK. because i designed another one with top buttons. The Super compact is basically the one that is custom designed for my setup. 1 Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 4, 2019 Author Share Posted February 4, 2019 One of the features i haven't really spoken much about is the Detent tab on the parameter dial. It's a subtle feature, but makes the parameter dial soooo much more user friendly! 1 Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted February 4, 2019 Share Posted February 4, 2019 @GisserD I think that may have been me misreading your want for tweaking via hand! But its a handy alternative....... Quote Link to comment Share on other sites More sharing options...
Hugsonic Posted February 7, 2019 Share Posted February 7, 2019 On 04/02/2019 at 18:52, GisserD said: One of the features i haven't really spoken much about is the Detent tab on the parameter dial. It's a subtle feature, but makes the parameter dial soooo much more user friendly! Thats is good news it certainly isn't user friendly by default. On another point should we have received any confirmation regarding the orders yet? Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 7, 2019 Author Share Posted February 7, 2019 30 minutes ago, Hugsonic said: Thats is good news it certainly isn't user friendly by default. On another point should we have received any confirmation regarding the orders yet? i hadn't even thought about that! ill get a confirmation email to everybody today! Thanks Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 7, 2019 Author Share Posted February 7, 2019 2 hours ago, GisserD said: i hadn't even thought about that! ill get a confirmation email to everybody today! Thanks Everybody that has placed an order should have now received confirmation via their paypal email address. Thanks Quote Link to comment Share on other sites More sharing options...
Hugsonic Posted February 20, 2019 Share Posted February 20, 2019 (edited) Hows this going Im itching to free up some space? Edited February 20, 2019 by Hugsonic Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 20, 2019 Author Share Posted February 20, 2019 (edited) 5 hours ago, Hugsonic said: Hows this going Im itching to free up some space? Printing The first shipments will be made tomorrow! I apologise its taken a little longer than expected for a few reasons. I can actually only print 4 at a time instead of 6. And the indent tap development has been a tricky issue to solve, but the additional ball bearing has solved the issue. Thanks for your patience. Edited February 20, 2019 by GisserD 3 Quote Link to comment Share on other sites More sharing options...
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.