nikon F Posted February 9, 2019 Posted February 9, 2019 I have seen an ashdown Spyder 330 with a 212 cab for £200 .anyone give me their thoughts on that combination and if that's a fair price please . Thanks Quote
Merton Posted February 9, 2019 Posted February 9, 2019 (edited) Very fair. The cab is realistically about £100-£150 depending on condition and the amp £150-£200. Go for it, or link me so I can 😂 Edited February 9, 2019 by Merton 1 Quote
nikon F Posted February 9, 2019 Author Posted February 9, 2019 thanks for that merton ,,,,,,,im swayed Quote
Paul S Posted February 9, 2019 Posted February 9, 2019 29 minutes ago, nikon F said: thanks for that merton ,,,,,,,im swayed Quote
nikon F Posted February 9, 2019 Author Posted February 9, 2019 love the sound ,,,,the cab is only 8ohms so not sure of the output ( 4 ohm amp ) but I added a 15 inch cab and its plenty for what I need ,,,,,,,,the only niggle is the front panel wood is slightly warped and I don't know what caused it ( its underneath the cab trying to straighten it out ,,,) 1 Quote
TheGreek Posted February 9, 2019 Posted February 9, 2019 Don't forget that Ashdown are members here. @Ashdown Engineering..get in contact and have the head serviced...it'll save any worries in the future. Quote
nikon F Posted February 9, 2019 Author Posted February 9, 2019 3 minutes ago, TheGreek said: Don't forget that Ashdown are members here. @Ashdown Engineering..get in contact and have the head serviced...it'll save any worries in the future. thanks for the info . Quote
attackbass Posted February 10, 2019 Posted February 10, 2019 I 23 hours ago, nikon F said: love the sound ,,,,the cab is only 8ohms so not sure of the output ( 4 ohm amp ) but I added a 15 inch cab and its plenty for what I need ,,,,,,,,the only niggle is the front panel wood is slightly warped and I don't know what caused it ( its underneath the cab trying to straighten it out ,,,) Hi, We have a couple of ashdown cabs in the studios I help run. They've all done this... It's probably due to combination of a damp environment as the studios are in railway arches and maybe a combination of the wood being sealed properly or just poor grade MDF or board. I ended up just glueing it back on as it was constantly falling off. Quote
Pow_22 Posted February 11, 2019 Posted February 11, 2019 Superb heads! Im currently on an old ABM300 but always loved the spyders. One of my fave of all the Ashdown heads! Enjoy Quote
nikon F Posted February 20, 2019 Author Posted February 20, 2019 On 09/02/2019 at 19:08, TheGreek said: Don't forget that Ashdown are members here. @Ashdown Engineering..get in contact and have the head serviced...it'll save any worries in the future. well ive just got back from a pre arranged trip to @Ashdown Engineering in Essex ,,,,,had a service on the spyder 330 ,,,,,,,,and what a nice experience ,,,very nice people and they didn't take the *iss out of my rubbish playing once ,,,,,,,,,,,more like constantly ! seriously a really nice bunch of people,a very good price for the service and a good laugh even though I committed the cardinal sin of forgetting the biscuits ,,,,,thanks ashdown engineering,,,,top notch customer service Andy Quote
Merton Posted February 20, 2019 Posted February 20, 2019 33 minutes ago, nikon F said: well ive just got back from a pre arranged trip to @Ashdown Engineering in Essex ,,,,,had a service on the spyder 330 ,,,,,,,,and what a nice experience ,,,very nice people and they didn't take the *iss out of my rubbish playing once ,,,,,,,,,,,more like constantly ! seriously a really nice bunch of people,a very good price for the service and a good laugh even though I committed the cardinal sin of forgetting the biscuits ,,,,,thanks ashdown engineering,,,,top notch customer service Andy Ah now. I’m popping in there tomorrow, what are the correct biscuits to purchase for them? Or is “any old shite” better than “none” in this case? 🤣 Quote
Ashdown Engineering Posted February 20, 2019 Posted February 20, 2019 1 hour ago, nikon F said: well ive just got back from a pre arranged trip to @Ashdown Engineering in Essex ,,,,,had a service on the spyder 330 ,,,,,,,,and what a nice experience ,,,very nice people and they didn't take the *iss out of my rubbish playing once ,,,,,,,,,,,more like constantly ! seriously a really nice bunch of people,a very good price for the service and a good laugh even though I committed the cardinal sin of forgetting the biscuits ,,,,,thanks ashdown engineering,,,,top notch customer service Andy Was our pleasure Andy. We’ll let you off the biscuits, but that only happens once 😉 Quote
Ashdown Engineering Posted February 20, 2019 Posted February 20, 2019 35 minutes ago, Merton said: Ah now. I’m popping in there tomorrow, what are the correct biscuits to purchase for them? Or is “any old shite” better than “none” in this case? 🤣 Ah good news. We prefer a good quality biscuit truth be told although there is certainly truth in any old shite is better than none 😉 1 Quote
nikon F Posted February 20, 2019 Author Posted February 20, 2019 48 minutes ago, Merton said: Ah now. I’m popping in there tomorrow, what are the correct biscuits to purchase for them? Or is “any old shite” better than “none” in this case? 🤣 only the best will do,,,,,,,,,,and can you make that times 2 to make up for my lack of thoughtfulness plz 😁 1 Quote
Merton Posted February 20, 2019 Posted February 20, 2019 1 hour ago, Ashdown Engineering said: Ah good news. We prefer a good quality biscuit truth be told although there is certainly truth in any old shite is better than none 😉 I will find some fine quality biscuity products for your tastebuds! 2 Quote
Merton Posted February 21, 2019 Posted February 21, 2019 21 hours ago, Ashdown Engineering said: Ah good news. We prefer a good quality biscuit truth be told although there is certainly truth in any old shite is better than none 😉 Well I hope the quality was up to scratch! Thanks for allowing me to pop in and play bass badly through your lovely ABM rig and cool new pedals (love the Triple Shot!) 1 Quote
Ashdown Engineering Posted February 21, 2019 Posted February 21, 2019 Was our pleasure, thanks for the fine choice in biscuits! 2 Quote
Lozz196 Posted February 22, 2019 Posted February 22, 2019 (edited) Ashdown and biscuits, like Anthony & Cleopatra, Richard Burton & Liz Taylor etc 🤣 Edited February 22, 2019 by Lozz196 1 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.