PUREJOYPEOPLE Posted March 11, 2019 Author Posted March 11, 2019 22 hours ago, Painy said: Just plugged this in at home for the first time this evening. Ashdown ABM500 through a pair of Aguilar DB112 cabs for the lows and a Laney Vc100 all valve head through a Laney IRT212 cab for the highs. You might be surprised to hear that it's quite loud. 😐 Whoa! I'm shocked that it's load haha! Looks beast I want to make it big just so I can go on tour with a huge bass/guit rig haha! That roadies would be hired to set up of course 1 Quote
paul_5 Posted March 11, 2019 Posted March 11, 2019 Running a dual amp rig through one cab at the moment: Ampeg B410hlf internally split into a sealed 2x10 with horn and a ported 2x10 at the bottom. Ampeg SVP PRO goes to the ‘low’ 2x10 and the other channel is driven by my B3n (after being split on my pedal board using a Behringer He’ll babe wah) into the 2nd channel of the Laney PA amp. Achieving dual amping with much less lifting!! 1 Quote
PUREJOYPEOPLE Posted March 11, 2019 Author Posted March 11, 2019 6 hours ago, paul_5 said: Running a dual amp rig through one cab at the moment: Ampeg B410hlf internally split into a sealed 2x10 with horn and a ported 2x10 at the bottom. Ampeg SVP PRO goes to the ‘low’ 2x10 and the other channel is driven by my B3n (after being split on my pedal board using a Behringer He’ll babe wah) into the 2nd channel of the Laney PA amp. Achieving dual amping with much less lifting!! I bet it sounds awesome Quote
Painy Posted May 11, 2019 Posted May 11, 2019 On 10/03/2019 at 19:17, Painy said: Just plugged this in at home for the first time this evening. Ashdown ABM500 through a pair of Aguilar DB112 cabs for the lows and a Laney Vc100 all valve head through a Laney IRT212 cab for the highs. You might be surprised to hear that it's quite loud. 😐 Thought I'd revive this thread with a very short clip of this rig in action. Terrible picture quality I'm afraid so I apologise for that but hopefully still worth a quick listen (through headphones) if anyone is interested. Quote
dannybuoy Posted May 11, 2019 Posted May 11, 2019 (edited) I tried bi-amping with a split signal and octave up and got a ton of noise from the 2nd amp until I got an amp switcher with an isolated output - worth bearing in mind if you ever hit the same problem! Some good info on the subject here: https://www.radialeng.com/understanding-aby-switchers Edited May 11, 2019 by dannybuoy 2 1 Quote
PUREJOYPEOPLE Posted June 4, 2019 Author Posted June 4, 2019 This is cool. I use a boss tuner and an Ls-2. No real issues with them ut this could save some space on the board lol Quote
bassbiscuits Posted June 4, 2019 Posted June 4, 2019 I sometimes use the following set up for big gigs when I need everything I can muster! Markbass LM2 into a Schroeder 1210 (4ohm). Another Markbass LM3 into an Aguilar GS410 (also 4ohm). Using any pedal with two outputs to split the signal (i think it was a chorus pedal switched off at the time). Sounds massive and very satisfying! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.