AndyTravis Posted April 18, 2019 Author Share Posted April 18, 2019 Stumbling block 1. will have to cut the pickguard out for the pickup, or have ridiculous action. Would rather have a playable bass. Looking at the state of the original wife, I assume this was how it was done anyhow. Quote Link to comment Share on other sites More sharing options...
Slappindabass Posted April 18, 2019 Share Posted April 18, 2019 (edited) I assumed it was anyway. Is the original just on top? If so ...thats as rough as a badgers derrière!🐼(no badger emoji) Edited April 18, 2019 by Slappindabass Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 18, 2019 Author Share Posted April 18, 2019 Just now, Slappindabass said: I assumed it was anyway. Is the original just on top? If so ...thats as rough as a badgers derrière!🐼(no badger emoji) I think the missing bits of pickguard on the original mean it’s mounted right onto the body. Quote Link to comment Share on other sites More sharing options...
JamieMillsBass Posted April 18, 2019 Share Posted April 18, 2019 Class! good luck with this, would love to have the ability with a chisel, drill and my hands in general to do something like this without destroying a perfectly good bass!! Are you going for the extra strong neck joint with the angled screws too (not sure if he made that modification himself on the 'wife' bass or if it was something that came along with the Yamaha)? Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 18, 2019 Author Share Posted April 18, 2019 13 minutes ago, JamieMillsBass said: Class! good luck with this, would love to have the ability with a chisel, drill and my hands in general to do something like this without destroying a perfectly good bass!! Are you going for the extra strong neck joint with the angled screws too (not sure if he made that modification himself on the 'wife' bass or if it was something that came along with the Yamaha)? The mitre join is only on the LTD3, Yamaha have a very expensive looking jig to do it as well. the “wife” is just standard 4 bolt. 1 Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 18, 2019 Author Share Posted April 18, 2019 Well. Lovely guy as he is, don’t think my Luthier bloke understands. To be honest, how he stays in business I’ve no clue. so. I’ve just gone for it. Have done Swiss cheese to chisel to sanding before. But...I’ve got new chisels. So this should be better. Quote Link to comment Share on other sites More sharing options...
KiOgon Posted April 18, 2019 Share Posted April 18, 2019 That's the way to do it 👍 Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 18, 2019 Author Share Posted April 18, 2019 (edited) 1 hour ago, KiOgon said: That's the way to do it 👍 Oh no it isn’t 😂😂😂 (It will be neatened up obviously.) Edited April 18, 2019 by AndyTravis 2 Quote Link to comment Share on other sites More sharing options...
DoubleOhStephan Posted April 18, 2019 Share Posted April 18, 2019 😂 1 Quote Link to comment Share on other sites More sharing options...
KiOgon Posted April 18, 2019 Share Posted April 18, 2019 38 minutes ago, AndyTravis said: Oh no it isn’t 😂😂😂 (It will be neatened up obviously.) I've seen better trained squirells at work 😄 That'll be lovely 👍 1 Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 18, 2019 Author Share Posted April 18, 2019 10 minutes ago, StevieE said: 😂 Exactly. I’m half way between “yes I’m a hero” and “why didn’t I just pay someone else?” 1 Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 18, 2019 Author Share Posted April 18, 2019 1 minute ago, KiOgon said: I've seen better trained squirells at work 😄 That'll be lovely 👍 It’s fine, I’ve found my dremmel thing with sanding belts - thank god. Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 18, 2019 Author Share Posted April 18, 2019 2 minutes ago, Meddle said: I always interpreted it this way. I don't know if Billy's bass was old enough to have an aluminium under pickguard. I'm guessing he cut the pickguard for the mudbucker and this left the pickguard too weak to remain intact. If you are keeping the bass mono, how will you get the pickups to play ball with each other? The impedance mismatch will probably put the P pickup out front of the mudbucker when you have both pickups on. Did some clever business with @KiOgon to help... the artec is listed as 27.9k, Seymour Duncan Hot for P is 22.9k. 1 Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 19, 2019 Author Share Posted April 19, 2019 Not much time today. Got a headstart on the control cavity extension. 1 Quote Link to comment Share on other sites More sharing options...
KiOgon Posted April 19, 2019 Share Posted April 19, 2019 Good job! Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 19, 2019 Author Share Posted April 19, 2019 36 minutes ago, KiOgon said: Good job! Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 19, 2019 Author Share Posted April 19, 2019 Well, that’s that bit. Now the pickguard. 2 Quote Link to comment Share on other sites More sharing options...
DoubleOhStephan Posted April 19, 2019 Share Posted April 19, 2019 Looking good! Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 19, 2019 Author Share Posted April 19, 2019 21 minutes ago, StevieE said: Looking good! You spoke too soon. 1 Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 19, 2019 Author Share Posted April 19, 2019 Just gonna leave this here (while I cry into a beer) Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 19, 2019 Author Share Posted April 19, 2019 Well. Now I know how it happened at least. debating just leaving it like it is. semi replica. 1 Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted April 19, 2019 Share Posted April 19, 2019 Leave it looks great Now get ageing that wood like I told ya! 1 Quote Link to comment Share on other sites More sharing options...
Rich Posted April 19, 2019 Share Posted April 19, 2019 47 minutes ago, AndyTravis said: Well. Now I know how it happened at least. debating just leaving it like it is. semi replica. Do you mean the pickguard? Looks fine. Or am I missing something? Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted April 19, 2019 Share Posted April 19, 2019 Pickguard Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 19, 2019 Author Share Posted April 19, 2019 (edited) 56 minutes ago, Rich said: Do you mean the pickguard? Looks fine. Or am I missing something? Yeah, realistically it was bound to happen. There’s only about 4mm of plastic left over when making the rebate for the pickup. it snapped on the last cut. Serendipitously, within a gnats chuff of where the original basses pickguard is snapped. so...I’m going to leave it as is. And maybe I will age things up a bit more. Edited April 19, 2019 by AndyTravis 3 Quote Link to comment Share on other sites More sharing options...
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.