Acebassmusic Posted April 26, 2019 Share Posted April 26, 2019 (edited) Up for sale or trade is my stunning Shuker Single Cut built in Jan 2014. I traded my Conklin Custom for this bass in 2016 with LukeCapon off here. Jon Shuker makes some very high quality basses and this is no exception on the design, fit and finish. A new one of these would set you back around £3k. It is in excellent condition with only minor marks / swirls from playing and comes with a hard case. I'm open to partial / full trades. Let’s see what ya' got. Alder body with buckeye facings and black veneer between top and body 34" scale currently tuned B to G Angled headstock with buckeye veneer - front and rear Gotoh tuners 7 piece maple / black veneer laminated set neck. 20.5mm deep at 1st fret, 22.5 at 12th, shallow 'C' section Two way truss rod with carbon fibre reinforcement Rosewood fretboard with 26 medium frets and 45mm brass nut Mother of pearl face and side dots Nordstrand Big Split pickups Shuker 3 band preamp: treble, mid cut / boost and mid freq stack, bass, pan, vol (pull passive) Schaller 2000 bridge, set at 18mm string spacing (can adjust from 17 to 19mm) Weight 8.6lbs / 3.9kg Edited July 14, 2019 by Acebassmusic SOLD 4 Link to comment Share on other sites More sharing options...
desmondpot Posted April 26, 2019 Share Posted April 26, 2019 A1!! 1 Link to comment Share on other sites More sharing options...
Guest Marcoelwray Posted April 26, 2019 Share Posted April 26, 2019 Awesome! Link to comment Share on other sites More sharing options...
Dood Posted April 26, 2019 Share Posted April 26, 2019 GORGEOUS!!!!!!!!!!!!! 1 Link to comment Share on other sites More sharing options...
burno70 Posted April 29, 2019 Share Posted April 29, 2019 Stunning! 1 Link to comment Share on other sites More sharing options...
Guest Marcoelwray Posted April 29, 2019 Share Posted April 29, 2019 I really love the Single cut "melting down" into the neck at the back of the isntrument. Love to do that too. Very fine work. But the more I see from J Shuker, the more I it's stunning... Link to comment Share on other sites More sharing options...
HazBeen Posted May 1, 2019 Share Posted May 1, 2019 Wow, lovely, 1 Link to comment Share on other sites More sharing options...
Al Krow Posted May 1, 2019 Share Posted May 1, 2019 Very nice! What are you particularly keen on trade wise? 1 Link to comment Share on other sites More sharing options...
Woodinblack Posted May 1, 2019 Share Posted May 1, 2019 Well, thats rather nice! 1 Link to comment Share on other sites More sharing options...
Acebassmusic Posted May 2, 2019 Author Share Posted May 2, 2019 (edited) 16 hours ago, Al Krow said: Very nice! What are you particularly keen on trade wise? Good question 👍 I'm not really after 4 strings, mainly 5's but might be persuaded for the right 6. Preference for 24 fret, active eq, 2 pickup. I'd like to try a Sadowsky Modern out at some point, maybe another Smith, Sei, Status or Mike Lull. Not really interested in Fender, Musicman or Warwick. I'm ok for amps and cabs but Vanderkley as px might be nice 🙂 Edited May 2, 2019 by Acebassmusic 1 Link to comment Share on other sites More sharing options...
Al Krow Posted May 2, 2019 Share Posted May 2, 2019 10 minutes ago, Acebassmusic said: Good question 👍 I'm not really after 4 strings, mainly 5's but might be persuaded for the right 6. Preference for 24 fret, active eq, 2 pickup. I'd like to try a Sadowsky Modern out at some point, maybe another Smith, Sei, Status or Mike Lull. Not really interested in Fender, Musicman or Warwick. I'm ok for amps and cabs but Vanderkley as px might be nice 🙂 Vanderkley cabs are indeed a treat! 1 Link to comment Share on other sites More sharing options...
OutSpoon Posted May 9, 2019 Share Posted May 9, 2019 That’s lovely. And in fact is the bass I really wanted. But it wasn’t for sale at the time... 😞 But I got it’s cousin instead. Amazing basses. 2 Link to comment Share on other sites More sharing options...
Chopthebass Posted May 10, 2019 Share Posted May 10, 2019 Fantastic!! I would trade my '78 Fender Precision for that. 1 Link to comment Share on other sites More sharing options...
RichValentine Posted May 20, 2019 Share Posted May 20, 2019 This was built for me by Shuker and have missed it since I sold it. If it is still around when I am back from holiday I might be interested! 1 Link to comment Share on other sites More sharing options...
.thumb.jpg.16ee4b95eaee4b6897a6ffa64c6371da.jpg)
Recommended Posts