TomRandles97 Posted June 6, 2019 Share Posted June 6, 2019 Hi, I’m hoping to add a stereo output on my Guild B302, alla ric o sound. Am I right in thinking that I can simply add another wire to the output lugs on each volume pot and wire them up to the two lugs on a stereo jack? Obviously The pickup selector wouldn’t be in use but I can control the blend of each pickup via the volume pots. Is there any other considerations I should make? Ie, phase/impedance or anything? Cheers, Tom Quote Link to comment Share on other sites More sharing options...
BassBunny Posted June 6, 2019 Share Posted June 6, 2019 I would think you would need to remove the wire from each volume to the selector switch. Just wire from each volume to the stereo jack and that should be that. Quote Link to comment Share on other sites More sharing options...
TomRandles97 Posted June 6, 2019 Author Share Posted June 6, 2019 I was hoping that I could keep the option for a mono output as well as a stereo one. Again, similar to the ric-o-sound type wiring where I could have a mono output and a stereo output. Quote Link to comment Share on other sites More sharing options...
BassBunny Posted June 6, 2019 Share Posted June 6, 2019 6 minutes ago, TomRandles97 said: I was hoping that I could keep the option for a mono output as well as a stereo one. Again, similar to the ric-o-sound type wiring where I could have a mono output and a stereo output. Should work like you suggested. Not sure how the selector switch for the pickups might affect things. Thinking cap time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.