Stub Mandrel Posted June 15, 2019 Share Posted June 15, 2019 I got this from @stewblack I hope he doesn't mind me using his 'before' pic: This is the non-active version. read any review of a 1A and people will say 'I use it with the active switched off', because these basses come from before the days of active-optimised pickups that sound weedy when used direct. It's definitely a bass, the old strings sounded dull, I replaced them with new Elite Stadium stainless and it sounds much nicer but still doesn't sound bright. The output is very high too so I suspect these pickups have LOTS of windings - they have a reputation for sounding more like a precision than a precision. I haven't done much: Generally cleaned it all, including the crud off the fingerboard (acetone) which I then oiled. Most cleaning was with 'grip filth' wipes although it wasn't very dirty. Lots of dings and varnish worn through in a couple of places. Took the bridge and knobs off and eventually got the lacquer off with an overnight soak in nitromors. Then pickled in vinegar and salt, then brasso, then Windsor and Newton lacquer (which will come off with white spirit). One intonation screw was snapped sort so i replaced them. Evidence of a different bridge before the old one put back. The three non-brass screws seem to be replacements for sheared off screws so teh brass-colour ones i put in as replacements woudl only go in at an angle to avoid the stub of the old screw , ho hum! Added a couple of straplock buttons, then fitted the elite strings. I could see the marks from where the bridge used to sit, used these a a guide and took little effort to get decent action and spot on intonation despite rather worn frets. Bootiful and a lovely blast from the past. 5 Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted June 15, 2019 Share Posted June 15, 2019 4 minutes ago, Stub Mandrel said: Bootiful and a lovely blast from the past. Nice job stub👍 , how does it sound . Quote Link to comment Share on other sites More sharing options...
Stub Mandrel Posted June 15, 2019 Author Share Posted June 15, 2019 44 minutes ago, Reggaebass said: Nice job stub👍 , how does it sound . Different! Powerful, not very bright even with brand new strings. Should make a good contrast with my performer. 1 Quote Link to comment Share on other sites More sharing options...
Bassassin Posted June 15, 2019 Share Posted June 15, 2019 Scrubbed up nice! Did a similar hose-down on a Thunder guitar a few years back: Not bad for five quid. 1 Quote Link to comment Share on other sites More sharing options...
Stub Mandrel Posted June 15, 2019 Author Share Posted June 15, 2019 11 minutes ago, Bassassin said: Not bad for five quid. Nice. But now I know stew ripped me off - I shuldn't have paid more than a tenner 🤣 Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 15, 2019 Share Posted June 15, 2019 Dammit. Is that my bass? I want it back now. 1 Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 15, 2019 Share Posted June 15, 2019 And no it was never what you'd call 'bright' but thump? Oh yes it has thump. 1 Quote Link to comment Share on other sites More sharing options...
Pea Turgh Posted June 16, 2019 Share Posted June 16, 2019 Ki0gon loom to finish off? I still can’t believe the difference it made in my Hohner Jack! 1 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted June 16, 2019 Share Posted June 16, 2019 Beautiful job. I have a soft spot for all things Westone Thunder 2 Quote Link to comment Share on other sites More sharing options...
Stub Mandrel Posted June 16, 2019 Author Share Posted June 16, 2019 5 minutes ago, Pea Turgh said: Ki0gon loom to finish off? I still can’t believe the difference it made in my Hohner Jack! I've been playing electronics since I was a kid (my dad had a shop selling /repairing electricals and renting TVs until the 80s) so if I change the electrics I'd want to do it myself - but in this case the pots are totally noiseless and the wiring is very neat. Quote Link to comment Share on other sites More sharing options...
Stub Mandrel Posted June 16, 2019 Author Share Posted June 16, 2019 Does anyone remember the old screw-in TV legs? You used to get four plates with an angled boss on them and four wooden legs with tilting feet on the end taht fitted to a TV but you could use them to make coffee tables with any convenient slab of flat stuff. Thinking about dad's shop and looking at the Westone slab of wood body made me think.... Quote Link to comment Share on other sites More sharing options...
Pea Turgh Posted June 16, 2019 Share Posted June 16, 2019 I think coffee table legs on this bass might be a mod too far! 1 1 Quote Link to comment Share on other sites More sharing options...
NickA Posted June 16, 2019 Share Posted June 16, 2019 Salt and Vinnegar??? To what end? Do you do cheese and onion too😁 Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 16, 2019 Share Posted June 16, 2019 Vinegar and bicarb make a powerful cleaning combination Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 16, 2019 Share Posted June 16, 2019 But I wouldn't put bicarb on my chips Quote Link to comment Share on other sites More sharing options...
Pea Turgh Posted June 16, 2019 Share Posted June 16, 2019 Now I’m thinking of that exploding seagull trick. 2 Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 16, 2019 Share Posted June 16, 2019 🐥🗯️ 1 Quote Link to comment Share on other sites More sharing options...
tauzero Posted June 16, 2019 Share Posted June 16, 2019 That's come up nicely. Next I suppose you'll be asking whether it should have a white or a tort pickguard. 2 Quote Link to comment Share on other sites More sharing options...
Stub Mandrel Posted June 17, 2019 Author Share Posted June 17, 2019 10 hours ago, tauzero said: That's come up nicely. Next I suppose you'll be asking whether it should have a white or a tort pickguard. Mirror, of course! Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted June 17, 2019 Share Posted June 17, 2019 On 16/06/2019 at 09:34, Stub Mandrel said: but you could use them to make coffee tables with any convenient slab of flat stuff. Talking of coffee tables, I really like this one 🙂 1 Quote Link to comment Share on other sites More sharing options...
Pea Turgh Posted June 17, 2019 Share Posted June 17, 2019 Hell of a nut width there 1 1 Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 17, 2019 Share Posted June 17, 2019 Just imagine the neck dive 1 2 Quote Link to comment Share on other sites More sharing options...
Stub Mandrel Posted July 10, 2019 Author Share Posted July 10, 2019 Used the Westone for a two-hour band practice last night. By gum, it really does sound more like a Precision than a Precision - it growls, it roars... Found it easier to play 'in anger' than sitting down at home. Two potential downsides (1) Don't get one of these if you like lightweight basses! (2) It is a bit quite prone to feedback when used with a fuzz. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.