Tomw1495 Posted August 9, 2019 Share Posted August 9, 2019 So I took the stacked mid pot knobs off of my sire v7 cause the pots were a little crackly, so I cleaned it but now I can't seem to get the top knob back into place, the bottom one is back in the rail and fitting into the notched section as normal, just can't get the top knob back into the right place? Any ideas on how I can fix this? Quote Link to comment Share on other sites More sharing options...
lemmywinks Posted August 9, 2019 Share Posted August 9, 2019 They're hex key rather than push fit aren't they? My V1 ones are anyway, should be a little hex screw on the side of the knob you can loosen. The non-stacked pots are push fit IIRC. Quote Link to comment Share on other sites More sharing options...
Tomw1495 Posted August 9, 2019 Author Share Posted August 9, 2019 The bottom knob is a hex fit but the top one of the stacked pot doesn't have a hex screw, I pulled it out like a press fit when I took it apart so that's why I'm confused as to why it's not fitting back together Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.