Line 6 HXFX & Pedaltrain Spark (update; now Ojai R30)

[Wilco]

Anyone using the above combination successfully? Appreciate the FX has a large power draw.

I’ve only got that, a Tech 21 Bass Fly Rig & a Line 6 wireless receiver on my board - any other power block suggestions to power those three?

Thanks.

 

 

 

 

 

Edited September 15, 2019 by Wilco

[Jack]

Can't help other than to say that in theory you might be able to connect the 2 500mA connectors together to power the HXFX (the stomp and the FX both seem happy on an 'honest' 1A from a reputable psu, but that would only leave you the 3 100mA outs for everything else, and your wireless probably wouldn't like that.

 

Strymon it is then. Ojai or Zuma R300.

[Wilco]

On 21/08/2019 at 10:08, Jack said:

Can't help other than to say that in theory you might be able to connect the 2 500mA connectors together to power the HXFX (the stomp and the FX both seem happy on an 'honest' 1A from a reputable psu, but that would only leave you the 3 100mA outs for everything else, and your wireless probably wouldn't like that.

 

Strymon it is then. Ojai or Zuma R300.

Thanks for that. Yes, looks like the Spark wouldn’t have enough juice.

I reckon an Ojai is going to be the solution - just need to track down a suitable cable for connecting two outputs to the HX.

[Wilco]

I’m finally getting round to this & have decided on the Ojai R30

As far as I can make out, cable wise I need for the HX FX;

Current doubler

Polarity convertor

2.1 to 2.5mm adaptor

Is that right & if so, any recommendations? 

Cheers.

[Jack]

4 hours ago, Wilco said:

I’m finally getting round to this & have decided on the Ojai R30

As far as I can make out, cable wise I need for the HX FX;

Current doubler

Polarity convertor

2.1 to 2.5mm adaptor

Is that right & if so, any recommendations? 

Cheers.

Yes. When I was looking at the Stomp I remember wondering if @obbm would be willing to make such a cable that's neater than jumping through those hoops.