Bassdude BE Posted August 22, 2019 Share Posted August 22, 2019 (edited) Hi, I've build 3 P-basses over the last few weeks in a quest to find the perfect combination of pickups, strings hardware, potis and capacitor for my style of music. I've tried almost any possible combination of potis and capacitors in these basses which leaves me with a few wiring looms that I'm probably not going to use anymore. So if anyone's looking to upgrade his or her's P-bass electronics I can save you some trouble. First up is a wiring loom from Charles guitars which consists out of: 2) TVT 250K CTS SOLID SHAFT MATCHED SET POTENTIOMETERSWITH 9.5MM (3/8") SHAFT DIAMETER AND 6.0MM THREADED LENGTH 1) SWITCHCRAFT 1/4" MONO INPUT JACK (1) 0.02UF JUPITER YELLOW VINTAGE CAPACITOR. https://www.charlesguitars.co.uk/parts-shop/jazz-bass-and-p-bass/precision-bass-pre-wired-upgrade-kit This was 33£ new, i'd be looking for 15£ + shipping cost. Next up is a home made wiring loom cosisting out of 2 Allparts 250K mini potis, switchcraft jack and Sprague 0.047UF capacitor. I'de be looking for 10£+ shipping cost for this. I also have a standard wiring loom from a Fender P with no mods, including the knobs. I'd be looking for 5£ + shipping cost for this one. I also have a Squier 5string bridge, tuners (4L, 1R), backplate and a set of Gotoh strap holders leftover that I'd like to sell. I will take 20£ + shipping cost for the lot. Edited August 22, 2019 by Bassdude BE Link to comment Share on other sites More sharing options...
Recommended Posts