fleabag Posted September 4, 2019 Share Posted September 4, 2019 18 hours ago, TheGreek said: Since posting above I've been looking for the details for the course...facked if I can find them... To paraphrase Captain Oates.." I may be gone for some time..." £300 seems very reasonable for a pro to ply their skills. Thing is Mick, you say you dont have the tools so you're going to have to up your budget from the £300 course fee. You could buy second hand, and if you do, i would be asking Jabba, Christine, Andy, what makes to look out for, and which would be essential for the work Quote Link to comment Share on other sites More sharing options...
TheGreek Posted September 4, 2019 Share Posted September 4, 2019 As you know, I live in a one bedroom flat - where would I house all the tools I would need? Quote Link to comment Share on other sites More sharing options...
Christine Posted September 4, 2019 Share Posted September 4, 2019 4 minutes ago, TheGreek said: As you know, I live in a one bedroom flat - where would I house all the tools I would need? Under the bed!! Quote Link to comment Share on other sites More sharing options...
TheGreek Posted September 4, 2019 Share Posted September 4, 2019 All that space is already taken by basses... Quote Link to comment Share on other sites More sharing options...
DoubleOhStephan Posted September 4, 2019 Share Posted September 4, 2019 4 minutes ago, TheGreek said: All that space is already taken by basses... Simply get a bunk bed and convert the lower bunk into a large tool chest! 1 Quote Link to comment Share on other sites More sharing options...
Christine Posted September 4, 2019 Share Posted September 4, 2019 4 minutes ago, DoubleOhStephan said: Simply get a bunk bed and convert the lower bunk into a large tool chest! Exactly and with tools under the bed you could build your own bunk beds and safe money too Sorry Owen, back on track 1 Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted September 4, 2019 Share Posted September 4, 2019 39 minutes ago, TheGreek said: All that space is already taken by basses... You’ve got enough basses under the bed without making more! Quote Link to comment Share on other sites More sharing options...
fleabag Posted September 5, 2019 Share Posted September 5, 2019 22 hours ago, TheGreek said: As you know, I live in a one bedroom flat - where would I house all the tools I would need? Then how are you going to build a bass if you aint not got any tools ? Quote Link to comment Share on other sites More sharing options...
TheGreek Posted September 5, 2019 Share Posted September 5, 2019 (edited) @fleabag, you didn't strike me as somebody who would put common sense in front of GAS... Stop using logic!! Edited September 6, 2019 by TheGreek Quote Link to comment Share on other sites More sharing options...
fleabag Posted September 6, 2019 Share Posted September 6, 2019 Arggggh ! My bad - what was i thinking Quote Link to comment Share on other sites More sharing options...
Rexel Matador Posted September 7, 2019 Share Posted September 7, 2019 Just been reading this thread and wanted to add my vote to the "just do it" camp. I have always loved the idea of luthiery and thought if only I had the space/time/money/knowledge etc. One day I decided I was going to build a bass from scratch, no matter how long it took, and my god was it worth it. The wealth of knowledge resources available on youtube alone is staggering. Crimson Guitars is a personal favourite. I amassed the tools gradually as each payday rolled around (and I'm very much still amassing, of course) and my very patient girlfriend lets me use half our our tiny spare room as a workshop, where I built myself a rough and ready workbench and put a shower curtain up to protect the other stuff in the room when I'm doing something particularly dusty. It's not ideal, but then nothing ever is, is it? It's hard, for sure, but weirdly, it's also - I think - perfectly within the capabilities of anyone with a creative spark and some common sense. As others have said already, it is certainly an all consuming rabbit hole of a hobby. Forgive the long winded post. The short version is give it a bash - live the dream 😀 3 Quote Link to comment Share on other sites More sharing options...
Owen Posted September 7, 2019 Author Share Posted September 7, 2019 Thanks everyone for your encoursgement. It will be your fault. I am thinking about getting a piece of scrap wood, having it turned and then seeing if I can wrestle it into shape. It will be 310mm at it's longest by 280mm at it's widest. How deep do I need to leave it for neck pocket, pickups and control cavity? Quote Link to comment Share on other sites More sharing options...
Richard R Posted September 7, 2019 Share Posted September 7, 2019 Go for it Owen! Quote Link to comment Share on other sites More sharing options...
TheGreek Posted September 7, 2019 Share Posted September 7, 2019 Got a reply: The Guitar Studio <[email protected]> To: 5 Sep at 23:44 Hi Mick As far as I'm aware the course is no longer running. The shop certainly no longer has any involment with it. Hope this helps. All the best Elliot 1 Quote Link to comment Share on other sites More sharing options...
Christine Posted September 7, 2019 Share Posted September 7, 2019 3 hours ago, owen said: Thanks everyone for your encoursgement. It will be your fault. I am thinking about getting a piece of scrap wood, having it turned and then seeing if I can wrestle it into shape. It will be 310mm at it's longest by 280mm at it's widest. How deep do I need to leave it for neck pocket, pickups and control cavity? The neck pocket depth and angle will depend on the curve of the body, the height and position of the bridge in relation to the thickness of the body, with a curved body you will need to make sure that the strings clear both the top and the pickups if that makes any sense. These are best worked out by drawing it out full size before you even look at wood (I use the back of some wall paper to draw on ) A problem I'm foreseeing is how to mark out and position the cavities in the body once it's been turned. A jig will have to be made and then how do you clamp the jig to the body in whatever way that needs to be done, all stuff that is very easy when the body starts off flat. OK if you cut those first then the turner looses the places on the front where he can screw to in order to turn the back. Speak to a turner first to see what they say about sensible options for work holding, he/she might have some good ideas, I'm afraid I know very little about lathes. Quote Link to comment Share on other sites More sharing options...
Owen Posted September 7, 2019 Author Share Posted September 7, 2019 Rats, you have pointed out the obvious flaw in my plan. And now you have pointed it out (thanks. No, really!) it changes what is happening in my mind. Back to the drawing board. Quote Link to comment Share on other sites More sharing options...
Maude Posted September 8, 2019 Share Posted September 8, 2019 I would imagine if you turned a giant dish on a lathe (I assume that's the plan) then you would have to plane a flat lengthways in line with the neck in order for the strings to have a flat run. In order to have enough depth for a decent neck pocket and the a flat top for string clearance you would need to start off with a very thick slab of wood. The curve from top to bottom (as you would wear it) of a lathed dish bass body would be fine for your plan but the curve from bridge end to neck end is going to need some clever planning. Quote Link to comment Share on other sites More sharing options...
Owen Posted September 9, 2019 Author Share Posted September 9, 2019 Thanks. Would doing the turning and then putting it through a large thicknesser do the bridge end to neck end? Whether such a thicknesser exists, I don't know. Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted September 9, 2019 Share Posted September 9, 2019 On 03/09/2019 at 18:54, owen said: I want a convex front and a concave back. I have watched lots of videos on carving the front of a LP with a router and orbital sander and decided that I could not. On Sunday we went to a food fair and there was a guy selling large wood turned plates. It crossed my mind that a body blank could be "turned". Convex on front, concave on the back. Once that is done I could cut the body shape out of the big bowl. The circumference could be the bottom of the instrument. I would need to be very careful with center body depth so as to give the hardware somewhere to live. But the sides could be quite slim. I like that. I am aware that the geometry could be challenging. What are the reasons this way of carving would not work? Hi, Owen When you say convex top and concave back - are you talking about this sort of thing? : If so, there are much easier ways of doing it than the thoughts above... There are a number of ways, but I'm more than happy to outline the easiest / safest of the various ways I've done it. Quote Link to comment Share on other sites More sharing options...
Owen Posted September 9, 2019 Author Share Posted September 9, 2019 Andy, you are on the money right there! Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted September 9, 2019 Share Posted September 9, 2019 55 minutes ago, owen said: Andy, you are on the money right there! OK My take on it, then. There are other tools that could be used to speed the process up or reduce the effort a bit, but - for 'reasonable' timbers such as mahogany, Sapele, poplar, walnut, etc - you could comfortably carve this type of shape in a body blank in an afternoon: ...using nothing more than these: The 4 steel things are Micro-plane blades. I have a flat one and a curved one in Coarse and in Fine. You can buy them at Axminster. The gloves are because, for this kind of carve, I find that it is MUCH easier NOT to use the handle that these micro-planes are supposed to fit into. Instead I hold them each end with stout gloves (because each of those teeth are razor sharp) and draw them, following the grain, down the length of the blank. The black thing is simply a former (cut out of an old exercise book cover - cardboard would be just as good) with the outer and inner radii so I know whether I am getting close and even. You will find the convex curve p**s easy with most medium woods. The concave takes a bit more effort if you are using these tools only. Then, to remove lumps, bumps and micro-plane marks, I would use cabinet scrapers (also wearing stout gloves!): Again, Axminster sell them but you should be able to get a set of 4 for less than a tenner in B&Q / Homebase / etc. Don't worry about sharpening them - they will come with the vital edge burr from new and that will last sharp enough for at least one body. Just recycle when you're done You would generally use the rectangular ones for the convex and the 'gooseneck' one for the concave. Again, you hold each side and draw it across the wood at a slight angle, down the length of the body (we can guide you when you get to that bit). The tiny burr at the edges acts like a mini plane and scrapes away the lumps and bumps. The good thing about using the basics above is that it all happens a teeny bit at a time. Treat it as a work-out. The trouble with the myriad of other ways of removing bulk quickly is that it is very, very easy to take - at best - chunks out you may not want to take out or - at worst - chunks out of yourself you definitely won't want to take out So that's my recommendation. However - don't start hacking wood until we've all had a chance to point out some of the geometry stuff and practicality stuff (like the depth of the electrical components!). There are some particular things to consider with double carves that are not covered in most (any?) YouTube tutorials, etc. This is exciting!!!!! Quote Link to comment Share on other sites More sharing options...
Si600 Posted September 9, 2019 Share Posted September 9, 2019 I'd still go with the lob it on a lathe method, but mostly because I've never heard of anyone doing that way and it's sounds like fun. Go with the sensible option is my recommendation to you though 😁 1 Quote Link to comment Share on other sites More sharing options...
Owen Posted September 9, 2019 Author Share Posted September 9, 2019 The lathe option would give a certain line which there is no way I could get with hand tools, but the by PM and various posts I am beginning to think the hand tool thing might be a go-er. Thanks everyone for their willingness to guide. I am going to buy some really big paper. 2 Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted September 9, 2019 Share Posted September 9, 2019 Just now, owen said: Thanks everyone for their willingness to guide. I am going to buy some really big paper. The New York Times? Quote Link to comment Share on other sites More sharing options...
Owen Posted September 9, 2019 Author Share Posted September 9, 2019 1 minute ago, SpondonBassed said: The New York Times? They have some pretty accurate readings of what is happening in the UK at the moment, but that would be de-railing my own thread! 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.