Nick Reed Posted September 5, 2019 Share Posted September 5, 2019 Hi all, Looking for some advice. The blacksmith has two speaker outputs and the amp can run at 2ohms. Does this mean each output will drive a 2ohm load. Also, if I’m running 2x4ohm cabs would be better to daisy chain them into one output, i.e creating a two ohm load on one speaker output or run a 4 ohm speaker from each output? thanks in advance Quote Link to comment Share on other sites More sharing options...
Bill Fitzmaurice Posted September 5, 2019 Share Posted September 5, 2019 The total load capacity is 2 ohms. Daisy chaining and individually connecting them to the two outputs is the same, parallel wired, and in both cases the total load is 2 ohms. There is a very slight advantage to connecting them individually, as that way you don't have one cable carrying the current drawn by both cabs. For that advantage to be meaningful your cables would have to be much too long and of too light a gauge. Quote Link to comment Share on other sites More sharing options...
Nick Reed Posted September 5, 2019 Author Share Posted September 5, 2019 Thanks Bill Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.