Hit&Run Posted July 29, 2007 Share Posted July 29, 2007 (edited) I'm moving house, and my stack needs to go. I'm looking to sell it or swap it for a combo. Maybe a bit of cash adjustment either way on the trades front, but I'd want at least 250W of power in the combo. I suppose I'm guaging interest with this post, but I do need rid of it, and I'll welcome any thoughts or questions you guys have on it. Here's the deal: Peavey Mark 6 Head (from the mid to late 90s). Made in the USA.[list] [*]400W @ 2ohm. 250W @ 4ohm. [*]high & low gain imputs [*]built in chorus (footswitchable, with 2 rotary controls) [*]built in compression (footswitchable, with 2 rotary controls,) [*]high & low shelving rotaries [*]9 band graphic eq [*]bright and punch buttons [*]DDT speaker protection [*]power amp in, and preamp out [*]variable crossover for the preamp (must be used with a stereo poweramp, or with the 'power amp in' section of this amp and another amp. [*]very good condition, serviced regularly. [*]black carpet covering [*]bombproof construction [/list]210TX cab. Made in the UK.[list] [*]2 x 10" drivers [*]HF horn with attenuation knob on rear of cab [*]recessed side handles [*]black carpet covering [*]very good condition [/list]115BXBW cab. Made in the USA.[list] [*]15" black widow speaker/driver [*]super sturdy recessed side handles [*]immense power [*]black carpet covering [*]condition: between average and good (for 2nd hand) [/list]I've only gigged it about 10 times, and for half of those I didn't use the whole lot! If you need a big, loud amp you could do a lot worse than this. I am looking around the £450 mark as the head and 210 are in flipping sweet condition, and it's all fully working. (The head cost me £469 alone 10 years ago) If anyone wanted any photos I could email you some. I'm not into photobucket & the like, but I suppose I could have a crack at it if there was enough interest. I live in lovely Bradford (West Yorks) if anyone's interested. Cheers for looking. Edited January 5, 2008 by Hit&Run Link to comment Share on other sites More sharing options...
Hit&Run Posted August 26, 2007 Author Share Posted August 26, 2007 bumpy bumpy Link to comment Share on other sites More sharing options...
Kev Posted September 8, 2007 Share Posted September 8, 2007 whats the very best price you can do on the head and 2x10 cab Link to comment Share on other sites More sharing options...
Hit&Run Posted September 9, 2007 Author Share Posted September 9, 2007 I'd be able to knock £100 off if you were just after the head & 2x10. The 15" cab is worth the least out of this lot anyway, and I'll still need to get rid of it. Cheers. Link to comment Share on other sites More sharing options...
cheddatom Posted September 10, 2007 Share Posted September 10, 2007 What about swapping the head and 2 x 10 for a peavey 115 combo? Link to comment Share on other sites More sharing options...
Hit&Run Posted September 16, 2007 Author Share Posted September 16, 2007 Bump for piccies! For trades, it would depend on the combo's specs. Link to comment Share on other sites More sharing options...
steve-soar Posted September 16, 2007 Share Posted September 16, 2007 Hi, just a bit of tyre kicking here, what ohm ratings are the cabs? Do you get the full 400w through them? My first proper amp was a Combo 300, then my first touring rig was a Mark 6 with 2x15" Black Widow cab....what a great sound but heavy. Link to comment Share on other sites More sharing options...
Hit&Run Posted September 17, 2007 Author Share Posted September 17, 2007 (edited) [quote name='steve-soar' post='61318' date='Sep 16 2007, 07:08 PM']Hi, just a bit of tyre kicking here, what ohm ratings are the cabs? Do you get the full 400w through them?[/quote] Each cab is 4 ohms, so when both are used together you get the full 400w. If just one cab is used the head puts out 250w. Cheers. Edited September 21, 2007 by Hit&Run Link to comment Share on other sites More sharing options...
steve-soar Posted September 26, 2007 Share Posted September 26, 2007 [quote name='Hit&Run' post='38512' date='Jul 29 2007, 04:45 PM']I'm moving house, and my stack needs to go. I'm looking to sell it or swap it for a combo. Maybe a bit of cash adjustment either way on the trades front, but I'd want at least 250W of power in the combo. I suppose I'm guaging interest with this post, but I do need rid of it, and I'll welcome any thoughts or questions you guys have on it. Here's the deal: Peavey Mark 6 Head (from the mid to late 90s). Made in the USA.[list] [*]400W @ 2ohm. 250W @ 4ohm. [*]high & low gain imputs [*]built in chorus (footswitchable, with 2 rotary controls) [*]built in compression (footswitchable, with 2 rotary controls,) [*]high & low shelving rotaries [*]9 band graphic eq [*]bright and punch buttons [*]DDT speaker protection [*]power amp in, and preamp out [*]variable crossover for the preamp (must be used with a stereo poweramp, or with the 'power amp in' section of this amp and another amp. [*]very good condition, serviced regularly. [*]black carpet covering [*]bombproof construction [/list]210TX cab. Made in the UK.[list] [*]2 x 10" drivers [*]HF horn with attenuation knob on rear of cab [*]recessed side handles [*]black carpet covering [*]very good condition [/list]115BXBW cab. Made in the USA.[list] [*]15" black widow speaker/driver [*]super sturdy recessed side handles [*]immense power [*]black carpet covering [*]condition: between average and good (for 2nd hand) [/list]I've only gigged it about 10 times, and for half of those I didn't use the whole lot! If you need a big, loud amp you could do a lot worse than this. I am looking around the £450 mark as the head and 210 are in flipping sweet condition, and it's all fully working. (The head cost me £469 alone 10 years ago) If anyone wanted any photos I could email you some. I'm not into photobucket & the like, but I suppose I could have a crack at it if there was enough interest. I live in lovely Bradford (West Yorks) if anyone's interested. Cheers for looking.[/quote] Hi what are the ohm ratings of each cab? Cheers Steve. Link to comment Share on other sites More sharing options...
steve-soar Posted September 26, 2007 Share Posted September 26, 2007 (edited) sorry didn't read last post Edited September 26, 2007 by steve-soar Link to comment Share on other sites More sharing options...
Recommended Posts