Source Audio C4 and Helix Stomp - preset changes

[tonyclaret]

Hi,

What do I need to control the presets on both pedals.

Can the helix stomp control the c4 via midi cc?

What are the solutions out there without remortgaging.

Cheers

[tonyclaret]

Bump

[Quatschmacher]

Seriously, get a Morningstar MC6. It has so many uses. They come up used pretty regularly. 

[tonyclaret]

10 hours ago, Quatschmacher said:

Seriously, get a Morningstar MC6. It has so many uses. They come up used pretty regularly. 

Yeah looks like i need a micro ghost too to do anything with the C4

[Quatschmacher]

21 minutes ago, tonyclaret said:

Yeah looks like i need a micro ghost too to do anything with the C4

or a source audio hub which will give you an extra 128 presets too.

[ratman]

I think any MIDI to USB host will work.

[BigRedX]

On 04/10/2019 at 22:12, tonyclaret said:

Hi,

What do I need to control the presets on both pedals.

Can the helix stomp control the c4 via midi cc?

What are the solutions out there without remortgaging.

Cheers

What exactly do you want to do?

If it's just making sure that selecting a preset on one selects the correct preset on the other I would hope that at least one of these devices supports MIDI program mapping.

If it's something else you'll need to provide more details.

[tonyclaret]

3 hours ago, BigRedX said:

What exactly do you want to do?

If it's just making sure that selecting a preset on one selects the correct preset on the other I would hope that at least one of these devices supports MIDI program mapping.

If it's something else you'll need to provide more details.

Yeah, pretty much that on presets nothing that fancy, however a midi to usb hub is also needed for C4

[Gottastopbuyinggear]

As far as I can see the Stomp only sends program change messages, and can't be configured to send CC.  I don't have any knowledge of the C4 so I can't comment on whether it would do it the other way.

If it did, however, and if you were up for a little bit of DIY, I've recently come across this which I'm successfully using as a USB MIDI hub to control a Stomp from other MIDI devices: https://neuma.studio/rpi-as-midi-host.html.