cthorpey Posted October 15, 2019 Share Posted October 15, 2019 Hi All, I was a good boy, I did my homework and I read the whole of the IEM thread. Following the advice on there I chose the KZ in ears and the Behringer beltpack and have been really happy for 12 months or so. Absolutely loving not lugging a cab all over the place. Bass into HX Stomp, stomp into X18 and X18 back into my head. Marvellous. Now the gas rears its head and I am looking at going wireless for both bass and IEM. We have a run of 12 gigs coming up on a fairly big stage and I really want the freedom to be able to wander around a bit. I tried wandering with the wired iem and it must have looked like someone tried to pull me off stage with a big hook. Definitely not the look I was going for. So my question is this, with no amp or cab behind me where do I put my wireless receiver ( not pedalboard sized) and my iem transmitter? We always set up with the pa rack on the opposite side of the stage from me so it cant go there and I am really not happy about having it all on the floor either. Any and all suggestions are very welcome! Thanks Chris. Quote Link to comment Share on other sites More sharing options...
LewisK1975 Posted October 15, 2019 Share Posted October 15, 2019 The traditional approach would be to have your Bass signal receiver with /near your pedal board (if you are using one), and the IEM transmitter in the PA rack. Sounds like that's not quite what you wanted to hear though.... Quote Link to comment Share on other sites More sharing options...
SICbass Posted October 15, 2019 Share Posted October 15, 2019 (edited) I‘m assuming that the receiver is something smaller than a 19” rack unit? What about this? https://m.thomann.de/gb/millenium_laptopstand_tripod.htm Edited October 15, 2019 by SICbass Quote Link to comment Share on other sites More sharing options...
fleabag Posted October 15, 2019 Share Posted October 15, 2019 As above, but a sheet music stand https://www.ebay.co.uk/p/Heavy-Duty-Orchestral-Conductor-Sheet-Music-Stand-Holder-Tripod-Base-Foldable-UK/6031187280?iid=113625689537&chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=113625689537&targetid=522577548423&device=c&mktype=pla&googleloc=9046134&poi=&campaignid=1782815748&mkgroupid=70885937642&rlsatarget=pla-522577548423&abcId=1139356&merchantid=7308734&gclid=EAIaIQobChMIz_jA0eSe5QIVzkPTCh18gwO9EAQYASABEgLJ5PD_BwE Quote Link to comment Share on other sites More sharing options...
mrtcat Posted October 15, 2019 Share Posted October 15, 2019 Put your IEM transmitter in the rack with the mixer and your bass wireless receiver next to your HX stomp. Many bass wireless receivers are designed to go on the floor or on a pedal board. I use a full fat Helix, which is mounted on a board in a flight case and my wireless receiver lives on the same board so I don't have to faff about wiring it up at every gig. 1 Quote Link to comment Share on other sites More sharing options...
SICbass Posted October 16, 2019 Share Posted October 16, 2019 9 hours ago, mrtcat said: Put your IEM transmitter in the rack with the mixer and your bass wireless receiver next to your HX stomp. Many bass wireless receivers are designed to go on the floor or on a pedal board. I use a full fat Helix, which is mounted on a board in a flight case and my wireless receiver lives on the same board so I don't have to faff about wiring it up at every gig. This looks like the most sensible solution to me. Quote Link to comment Share on other sites More sharing options...
BigRedX Posted October 16, 2019 Share Posted October 16, 2019 12 hours ago, mrtcat said: Put your IEM transmitter in the rack with the mixer and your bass wireless receiver next to your HX stomp. Many bass wireless receivers are designed to go on the floor or on a pedal board. I use a full fat Helix, which is mounted on a board in a flight case and my wireless receiver lives on the same board so I don't have to faff about wiring it up at every gig. Where did you get that flight case from? Quote Link to comment Share on other sites More sharing options...
mrtcat Posted October 16, 2019 Share Posted October 16, 2019 2 hours ago, BigRedX said: Where did you get that flight case I think it's this one https://www.swanflight.com/guitarist-flightcases/pedal-board-flightcases/multi-pedal-boards/single-level-guitar-pedal-board-case-size-3.html Quote Link to comment Share on other sites More sharing options...
cthorpey Posted October 16, 2019 Author Share Posted October 16, 2019 mrtcat, Thanks for the piccy, I have ordered the G75 and for some reason I had convinced myself that the receiver couldn't go on the pedalboard. I will have to test the IEM transmitter in the rack. It already has a wireless router and 2 other receivers. Thanks for all your help C. Quote Link to comment Share on other sites More sharing options...
BigRedX Posted October 16, 2019 Share Posted October 16, 2019 16 minutes ago, mrtcat said: I think it's this one https://www.swanflight.com/guitarist-flightcases/pedal-board-flightcases/multi-pedal-boards/single-level-guitar-pedal-board-case-size-3.html Thanks! Quote Link to comment Share on other sites More sharing options...
mrtcat Posted October 16, 2019 Share Posted October 16, 2019 1 hour ago, cthorpey said: mrtcat, Thanks for the piccy, I have ordered the G75 and for some reason I had convinced myself that the receiver couldn't go on the pedalboard. I will have to test the IEM transmitter in the rack. It already has a wireless router and 2 other receivers. Thanks for all your help C. Should be fine as long as you are all on different frequencies. We have 5 transmitters and a router in our rack and none of them interfere with each other. The g75 is great as you have the scan function that can be a lifesaver. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.