WarPig Posted January 12, 2009 Share Posted January 12, 2009 Do these exsist? 1x15 or 2x10 specifically. Quote Link to comment Share on other sites More sharing options...
Dubs Posted January 12, 2009 Share Posted January 12, 2009 [quote name='WarPig' post='377340' date='Jan 12 2009, 01:17 AM']Do these exsist? 1x15 or 2x10 specifically.[/quote] Yes, definitely. Quote Link to comment Share on other sites More sharing options...
WarPig Posted January 12, 2009 Author Share Posted January 12, 2009 (edited) [quote name='benwhiteuk' post='377343' date='Jan 12 2009, 01:28 AM']Yes, definitely.[/quote] hahah okay.....well do you have an example? i shouldve written more, but this time of night im lazy. Edited January 12, 2009 by WarPig Quote Link to comment Share on other sites More sharing options...
Dubs Posted January 12, 2009 Share Posted January 12, 2009 (edited) [quote name='WarPig' post='377345' date='Jan 12 2009, 01:30 AM']hahah okay.....well do you have an example? i shouldve written more, but this time of night im lazy.[/quote] Haha I was being purposely awkward Have a look at a lot of the Peavy stuff – you can order most of their 2x10 and 1x15 cabs in either 4 or 8 ohms. Also, I think Mark Bass do their Traveller series of cabs in 4 ohms. The vast majority of the Scheroder cabs can be either 4 or 8 ohms – look at the 1210 for example. A lot of 1x15 and 2x10 cabs are 8 ohms because the manufactures envisage them being used as an extension cab rather than a single cab solution…I think... Edited January 12, 2009 by benwhiteuk Quote Link to comment Share on other sites More sharing options...
EBS_freak Posted January 12, 2009 Share Posted January 12, 2009 [url="http://www.ebssweden.com"]www.ebssweden.com[/url] lots of 4 ohm goodness there... and for other readers, they can be order as 8ohm also. Quote Link to comment Share on other sites More sharing options...
fifeq Posted January 12, 2009 Share Posted January 12, 2009 i got one. it was normal hartke 8ohm before Quote Link to comment Share on other sites More sharing options...
Alien Posted January 12, 2009 Share Posted January 12, 2009 I've got a DIY 4 Ohm 1x15 that doesn't get a lot of use. Fitted with an Eminence Kappa driver, 450W handling. I'd be looking for about £80. I could probably deliver as I'm going to be down your neck of the woods fairly soon. PM me if you're interested. Andy Quote Link to comment Share on other sites More sharing options...
WarPig Posted January 12, 2009 Author Share Posted January 12, 2009 Pm'd Alien. To be honest EBS, MB and Scheroder are abit out of my price range. Quote Link to comment Share on other sites More sharing options...
dannybuoy Posted January 12, 2009 Share Posted January 12, 2009 (edited) Dr Bass 1580 looks awesome, they have smaller 4 ohm cabs too. You can get them from RIM Basses, who is a member on here. BFM Omni 10s also pop up for sale on here occasionally. But it looks like you might have a smokin deal with that DIY 15! Edited January 12, 2009 by dannybuoy Quote Link to comment Share on other sites More sharing options...
bumnote Posted January 12, 2009 Share Posted January 12, 2009 Any reason for a 4 ohm particulalry? The difference in volume is minimal, you would get more of a result with better efficiency drivers, and an 8 ohm cab is easier to sell on. Quote Link to comment Share on other sites More sharing options...
WarPig Posted January 12, 2009 Author Share Posted January 12, 2009 (edited) [quote name='bumnote' post='377805' date='Jan 12 2009, 03:28 PM']Any reason for a 4 ohm particulalry? The difference in volume is minimal, you would get more of a result with better efficiency drivers, and an 8 ohm cab is easier to sell on.[/quote] I have problems transporting my 2x10 + head around, so i thought id kill 2 birds with one stone (as they say) and use one 4ohm cab to get full power in a compact system. Although after a quick ponder.....i suppose its more to do with how much air you push? Edited January 12, 2009 by WarPig Quote Link to comment Share on other sites More sharing options...
clauster Posted January 12, 2009 Share Posted January 12, 2009 Kill both birds with one stone - BFM Omni10 with Basslites. 300w, 4 Ohm, much volume. Quote Link to comment Share on other sites More sharing options...
bumnote Posted January 12, 2009 Share Posted January 12, 2009 [quote name='WarPig' post='377815' date='Jan 12 2009, 03:35 PM']I have problems transporting my 2x10 + head around, so i thought id kill 2 birds with one stone (as they say) and use one 4ohm cab to get full power in a compact system. Although after a quick ponder.....i suppose its more to do with how much air you push?[/quote] I bought a fairly old acoustic 402 1x15 speaker cab with an 220 amp last year. It had a 15 ohm knackered organ speaker, and the cab was designed as a 4 ohm. I gigged it with an 8 ohm eminence from another cab for a while, and eventually bought a new bass light speaker for about £100 I cant hear the difference in volume. Alex has made similar comments on various threads. Theres nothing wrong with 4 ohm except they are more difficult to sell, because most amps wont handle a 2 ohm load, which is what you would get if youu added a second 4 ohm cab. Quote Link to comment Share on other sites More sharing options...
alexclaber Posted January 12, 2009 Share Posted January 12, 2009 [quote name='WarPig' post='377815' date='Jan 12 2009, 03:35 PM']Although after a quick ponder.....i suppose its more to do with how much air you push?[/quote] Indeed. The nominal impedance and the (thermal) power handling rating are two of the least significant specs yet two of the few that tend to be quoted - annoying isn't it?! The sensitivity, particularly in the lower regions, has much more impact on how loud a bass cab will be with a lower powered amp, whilst the excursion limited power handling determines how loud a bass cab will go with a heftier amp pushing it. Unfortunately with smaller and less pricey cabs you often suffer from a lack of low frequency sensitivity and a lack of excursion limited power handling. The Kappa driver in Andy's cab is in a different league to that you'll find in most commercial cabs, total bargain at the price! Alex Quote Link to comment Share on other sites More sharing options...
Sean.Robinson Posted January 12, 2009 Share Posted January 12, 2009 Hi, just to add to your growing list of makes both eden and ampeg make 4 ohm cabs. Quote Link to comment Share on other sites More sharing options...
josh3184 Posted January 12, 2009 Share Posted January 12, 2009 (edited) I'm selling one infact! (a 4ohm 300w cab that is) [url="http://basschat.co.uk/index.php?showtopic=28311&st=0"]http://basschat.co.uk/index.php?showtopic=28311&st=0[/url] Edited January 12, 2009 by josh3184 Quote Link to comment Share on other sites More sharing options...
The_D Posted January 12, 2009 Share Posted January 12, 2009 [quote name='Alien' post='377597' date='Jan 12 2009, 12:51 PM']I've got a DIY 4 Ohm 1x15 that doesn't get a lot of use. Fitted with an Eminence Kappa driver, 450W handling. I'd be looking for about £80. I could probably deliver as I'm going to be down your neck of the woods fairly soon. PM me if you're interested. Andy[/quote] I'll vouch for Alien. He sold me a DIY 2x10 and its a cracking little cab. Quote Link to comment Share on other sites More sharing options...
Alien Posted January 12, 2009 Share Posted January 12, 2009 [quote name='The_D' post='378312' date='Jan 12 2009, 09:47 PM']I'll vouch for Alien. He sold me a DIY 2x10 and its a cracking little cab.[/quote] Thanks Buddy! This was built to go with the one I sold to The_D, it's got the same corners and connections just a different grille. Anyway, here's a couple of pics like you requested. [attachment=18608:PICT0259.JPG] From the front [attachment=18609:PICT0260.JPG] From the top/side [attachment=18610:PICT0261.JPG] Connector plate Andy Quote Link to comment Share on other sites More sharing options...
The_D Posted January 12, 2009 Share Posted January 12, 2009 [quote name='Alien' post='378358' date='Jan 12 2009, 10:22 PM']Thanks Buddy! This was built to go with the one I sold to The_D, it's got the same corners and connections just a different grille. Anyway, here's a couple of pics like you requested. [attachment=18608:PICT0259.JPG] From the front [attachment=18609:PICT0260.JPG] From the top/side [attachment=18610:PICT0261.JPG] Connector plate Andy[/quote] Dont think I could hate you any more than I do right now lol! If I had the money I would be pinching this from Warpig! Quote Link to comment Share on other sites More sharing options...
WarPig Posted January 12, 2009 Author Share Posted January 12, 2009 [quote name='Sean.Robinson' post='378271' date='Jan 12 2009, 09:21 PM']Hi, just to add to your growing list of makes both eden and ampeg make 4 ohm cabs.[/quote] Thanks for adding them, but too pricey for what im after. [quote name='josh3184' post='378296' date='Jan 12 2009, 09:38 PM']I'm selling one infact! (a 4ohm 300w cab that is) [url="http://basschat.co.uk/index.php?showtopic=28311&st=0"]http://basschat.co.uk/index.php?showtopic=28311&st=0[/url][/quote] Thanks Josh, abit big for my purpose. Im not often this fussy. [quote name='Alien' post='378358' date='Jan 12 2009, 10:22 PM']Thanks Buddy! This was built to go with the one I sold to The_D, it's got the same corners and connections just a different grille. Anyway, here's a couple of pics like you requested. [attachment=18608:PICT0259.JPG] From the front [attachment=18609:PICT0260.JPG] From the top/side [attachment=18610:PICT0261.JPG] Connector plate Andy[/quote] Pm'd Quote Link to comment Share on other sites More sharing options...
casapete Posted January 13, 2009 Share Posted January 13, 2009 Peavey 1x15 Black widow cabs are available in 4 or 8 ohms,and handle 350 watts rms. Their standard 2x10 cabs are 4 ohm but only 175 watts rms, although they do a 4 ohm 4x10(350w). Great cabs for the money, and a good s/h buy. Quote Link to comment Share on other sites More sharing options...
Raggy Posted January 14, 2009 Share Posted January 14, 2009 I have a Peavey Black Widow 4ohm 15 cab for sale. PM if your interested. Raggy Quote Link to comment Share on other sites More sharing options...
WarPig Posted January 14, 2009 Author Share Posted January 14, 2009 Wow so many offers. Thanks all but ive gone with Aliens DIY 1x15. Quote Link to comment Share on other sites More sharing options...
.thumb.JPG.f64760d1b034b7d4ec508b162dcdd865.JPG)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.