bassatnight Posted October 19, 2019 Share Posted October 19, 2019 Hi All, I am recently started going back to the analogue eighties and purchased a couple of old synths. Unfortunately an eBay punt for a 1985 Roland JX8P has slightly backfired, and despite assurances of no issues and complete working order this is not quite the case having taken delivery of the keyboard, apart from needing an overall service there is a slight issue with a couple of the key's sticking (possibly internal dust and grime?) - I'd rather not attempt an amateur repair. Does anyone have any recommendations for a reliable repair business, possibly based in the south? (one that doesn't hold on to them for months on end without actually working on them!) Kind Regards, Steve. Quote Link to comment Share on other sites More sharing options...
ambient Posted October 19, 2019 Share Posted October 19, 2019 can’t you send it back? Quote Link to comment Share on other sites More sharing options...
bassatnight Posted October 19, 2019 Author Share Posted October 19, 2019 Probably, but they are as rare as hens teeth and I have been searching for a year for one, the price I paid wasn't too bad. I don't mind paying for a service and repair if required, just trying to find a reputable repair business that can return her to better days. 😉 Quote Link to comment Share on other sites More sharing options...
oldslapper Posted October 19, 2019 Share Posted October 19, 2019 http://www.emismusic.co.uk/?LMCL=wh198E If you can get to Bristol, this guy is well regarded. 1 Quote Link to comment Share on other sites More sharing options...
Roger2611 Posted October 20, 2019 Share Posted October 20, 2019 Synth Restore. 1st floor, 57 Harpur Street, Bedford. MK40 2SR. United Kingdom Email: [email protected] I used this guy for a full overhaul and service of my JX3P I really cannot recommend him highly enough, he clearly knows all there is to know about these old synths and he has a genuine passion for them, I was considering buying a PGM200 programmer for it, he showed me how to go in and edit and create the sounds without the need for the programmer. This guy was excellent and I wouldn't hesitate to use him again Rog 1 Quote Link to comment Share on other sites More sharing options...
toneknob Posted October 21, 2019 Share Posted October 21, 2019 I had a Moog Taurus servied by these guys - https://synthservice.com/ based in NW London. Also have a look at RL Music https://www.facebook.com/RLMusic/ (their normal website seems to be offline) from Reading, and they also pointed me at KSR in south-west London. 1 Quote Link to comment Share on other sites More sharing options...
DJpullchord Posted October 21, 2019 Share Posted October 21, 2019 I know a bloke from mid wales who refuses to work on anything unless it’s interesting. Which can be tricky. Quote Link to comment Share on other sites More sharing options...
YouMa Posted October 23, 2019 Share Posted October 23, 2019 If it's just sticky keys it's dead easy just be careful. Most synths of this age used two silver coated rails to determine notes using control voltage which is then sent to the oscillators. You can clean them easily with isopropyl alcohol or switch cleaner and gently rub with cotton buds. Put switch cleaner into knobs and faders as well and twiddle them back and fourth to stop dead spots and crackles. I build analog modules from schematics and these synths are tougher than you think. 1 Quote Link to comment Share on other sites More sharing options...
YouMa Posted October 23, 2019 Share Posted October 23, 2019 Sorry just looked and the keys on this synth will be bedded on copper strip, again just go careful when you unscrew and clean the copper with isopropyl alcohol. 1 Quote Link to comment Share on other sites More sharing options...
bassatnight Posted October 26, 2019 Author Share Posted October 26, 2019 Thanks for the support guys I now seem to have the same gas for Synths as I have for Bass... Well almost! I have approached a fairly local repair tech Synth Prof, lots of high recommendations. Quote Link to comment Share on other sites More sharing options...
YouMa Posted October 28, 2019 Share Posted October 28, 2019 I love synths. I remember how elated I was when I built my first basic VCF. You can make some amazing noises.lol. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.