Jump to content
Why become a member? ×

Help with active wiring please


Jimothey
 Share

Recommended Posts

I’m trying to wire up my Washburn XB-600 6 string and I’ve connected up the battery and the jack but I can’t find a wiring diagram for the pickup wiring 

Sorry about the bad drawing but I hope you get the idea 

4A437808-F4D4-4AAE-815E-D58CDD09CE0F.thumb.jpeg.e113ac44a9a13fc0f19f32f77f0186ae.jpeg

Does 1 go to 1 and 2 go to 2 if so where does the grounds go? do they go on the side of the pot where I’ve written ground???

Link to comment
Share on other sites

@KiOgon I’ve wired it up like that and no sound came out apart from humming, and the same thing that happened with my P the hum got louder when I touched the strings so I’ll have a look at the bridge ground to check that but as part of the course I checked the pickups and they hadn’t gone open the neck is 12k and the bridge is 15k which seemed a bit high to me as aren’t active pickups supposed to have a lower output than passive? I did think that if it’s a problem with the preamp and not the wiring could I rip out the preamp and just put 2v 2t passive wiring in or wouldn’t that work?? But I need to try and investigate a bit more on what the problem is, if you’ve got any advice at where to start I’d gladly accept any ideas............😀

Edited by Jimothey
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...