HumblePie Posted November 26, 2019 Share Posted November 26, 2019 (edited) Exceptional instrument, handmade by Nikola Adamovic in the Netherlands using prime woods and components. - white limba body - guariuba top - wenge tone plate - guariuba/wenge neck - zollernia finger board - scale length: 34,25" (killer B string) - weight: 3,9 KG / 8.6 lbs - stringspacing: 18mm - very, very low string action possible (due to a special fret work of Nicola Adamovic) - pick-ups: 2 x häussel bass bars - electronics: adamovic passive electronics: both pick-ups: parallel, in series and as single coils switchable + balance + tone control + volume (a lot headroom, very flexible.. the electronic compartement is big enough to add an active pre-amp, of necesssary) The bass was made in 2015 and is in very good condition. Original price was £4282, a new one ordered with the same specs sets you back £4600 / 5500€. Edited January 21, 2020 by HumblePie Link to comment Share on other sites More sharing options...
PriZeMaN Posted December 5, 2019 Share Posted December 5, 2019 How does the neck attach to the body? Link to comment Share on other sites More sharing options...
HumblePie Posted December 5, 2019 Author Share Posted December 5, 2019 23 minutes ago, PriZeMaN said: How does the neck attach to the body? It is a Set-in neck, glued in like Fodera Deluxe basses or any Gibson/Les Paul type guitar. Link to comment Share on other sites More sharing options...
PriZeMaN Posted December 5, 2019 Share Posted December 5, 2019 14 minutes ago, HumblePie said: It is a Set-in neck, glued in like Fodera Deluxe basses or any Gibson/Les Paul type guitar. Thanks mate. Great looking bass. I was asking because I would want to dye the body but as the neck is set it would be a more difficult to dip. Link to comment Share on other sites More sharing options...
HumblePie Posted December 7, 2019 Author Share Posted December 7, 2019 I am not a luthier, but I think you could dye the body very easily for not much money. A full refinish including taking off the old laquer is 300€, and just getting the body done without having to remove any finish has to me much cheaper. Link to comment Share on other sites More sharing options...
PriZeMaN Posted December 7, 2019 Share Posted December 7, 2019 2 hours ago, HumblePie said: I am not a luthier, but I think you could dye the body very easily for not much money. A full refinish including taking off the old laquer is 300€, and just getting the body done without having to remove any finish has to me much cheaper. Thanks for the reply ma man, it gives me things to think about Link to comment Share on other sites More sharing options...
Hellzero Posted January 14, 2020 Share Posted January 14, 2020 One sixer out of 38 for sale on BassChat !!! Link to comment Share on other sites More sharing options...
Recommended Posts