StraightSix Posted November 27, 2019 Share Posted November 27, 2019 I am looking to stack a couple of 210 cabs which currently have rubber feet fitted to the long side. I want to run them upright (stacked end on end) and I've been looking for a while for cups that fit to the top of the lower cab so the feet of the upper cab will sit securely in them for added stability. I seem to remember that some of the later Trace Elliot cabs had these fitted. Does anyone know where these can be sourced...? I have done a fair bit of searching but maybe I am not using the correct terminology. Any help is appreciated. Quote Link to comment Share on other sites More sharing options...
stevie Posted November 28, 2019 Share Posted November 28, 2019 https://www.ebay.co.uk/itm/Marshall-Foot-Cups-Set-4-/391473670775 I'm not convinced they'll do much for stability, but there you go. Quote Link to comment Share on other sites More sharing options...
Happy Jack Posted November 28, 2019 Share Posted November 28, 2019 Sorted - https://www.screwfix.com/p/ratchet-tie-down-straps-5m-x-25mm-2-pack/24567?kpid=24567&ds_kid=92700046638549236&gclsrc=aw.ds&ds_rl=1243318&ds_rl=1241687&ds_rl=1245250&gclid=CjwKCAiA_f3uBRAmEiwAzPuaM3Bodq2Ow887t_RLpBnKOkJL0ICeGxCu4zpzeWsI58g9Cr9Mt8z4wBoCcZsQAvD_BwE Quote Link to comment Share on other sites More sharing options...
stevie Posted November 28, 2019 Share Posted November 28, 2019 Here's another option: https://www.argos.co.uk/product/9099737 2 Quote Link to comment Share on other sites More sharing options...
BassBunny Posted November 28, 2019 Share Posted November 28, 2019 I'd change the corners for the plastic locking type. That way you can stack them either way without any problems. My 2 1x12's have them and they are perfectly stable when stacked vertically. Likey So.: https://cpc.farnell.com/penn-elcom/c1539/square-corner-protector/dp/AR71011?mckv=sW49Y15oM_dc|pcrid|224685952259|kword||match||plid||slid||product|AR71011|pgrid|52699126931|ptaid|pla-608250286317|&CMP=KNC-GUK-CPC-SHOPPING&gclid=CjwKCAiA_f3uBRAmEiwAzPuaM9P8xff_reLZ1zsaasE8l3wIz61sXQ2BR1qdMU3quhLcsccX4b_3ZxoCc1cQAvD_BwE And these are better: https://www.speakerbuildersupply.com/Plastic-chevron-stack-corners-p/c156-asterisk-.htm Quote Link to comment Share on other sites More sharing options...
paul_5 Posted November 28, 2019 Share Posted November 28, 2019 I know some players who regularly make massive foot cups when playing live, shall I give them a bell? 1 2 Quote Link to comment Share on other sites More sharing options...
grenadillabama Posted November 29, 2019 Share Posted November 29, 2019 Once I used "door pulls ", as found on sliding closet doors. They were brass and didn't look cheap on a Vox Westminster cabinet. Quote Link to comment Share on other sites More sharing options...
StraightSix Posted November 29, 2019 Author Share Posted November 29, 2019 Thanks for the suggestions - I especially like the ratchet straps Just to close this thread on a positive note, here's a link to original Trace Elliot foot cups available from the USA: https://britishaudio.com/collections/trace-elliot-parts/products/trace-elliot-foot-holder Quote Link to comment Share on other sites More sharing options...
stewblack Posted November 29, 2019 Share Posted November 29, 2019 I actually use the ratchet straps. Keeps all together on my dolly for a speedy exit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.