AngelDeVille Posted November 29, 2019 Share Posted November 29, 2019 My next project will have 2 sets of passive Prescision pickups. Duncan Design/MIM 250k pots. I want to minimize the number of pots. I'm thinking master volume/blend/tone. I might consider volume/volume/direct to jack. Do you have any ideas? Quote Link to comment Share on other sites More sharing options...
paul_5 Posted November 29, 2019 Share Posted November 29, 2019 2 stacked knobs with volume and tone for each pickup, just like the old Jazz basses used to. 1 Quote Link to comment Share on other sites More sharing options...
AngelDeVille Posted November 29, 2019 Author Share Posted November 29, 2019 4 minutes ago, paul_5 said: 2 stacked knobs with volume and tone for each pickup, just like the old Jazz basses used to. Hmmm... I did have that thought in the back of my cranium, I do only need a single tone and would mostly use the neck pickup. So maybe just use the bridge as a stacked with the tone control.... I could probably get by with a dummy pickup in the bridge... On the the stacked Jazz how was the stack configured? I have a stacked on another guitar and I wired it bottom volume/top tone. Quote Link to comment Share on other sites More sharing options...
paul_5 Posted November 29, 2019 Share Posted November 29, 2019 If I was having a master tone control then I think I’d have the 2 volumes on a single stacked knob and the tone control on its own. 1 Quote Link to comment Share on other sites More sharing options...
dannybuoy Posted November 29, 2019 Share Posted November 29, 2019 Maybe master vol/tone and a 3-way selector switch? Never tried a double P, but on a Jazz I found I only ever used either pickup soloed or both up full! 1 Quote Link to comment Share on other sites More sharing options...
jrixn1 Posted November 29, 2019 Share Posted November 29, 2019 2 hours ago, AngelDeVille said: I want to minimize the number of pots. 1. Blend knob (or a selector switch) 2. Tone knob. No volume control. 1 Quote Link to comment Share on other sites More sharing options...
AngelDeVille Posted November 29, 2019 Author Share Posted November 29, 2019 18 minutes ago, jrixn1 said: No volume control. I had an ex-wife like that. 1 1 Quote Link to comment Share on other sites More sharing options...
Geek99 Posted November 29, 2019 Share Posted November 29, 2019 2 hours ago, AngelDeVille said: Hmmm... I did have that thought in the back of my cranium, I do only need a single tone and would mostly use the neck pickup. So maybe just use the bridge as a stacked with the tone control.... I could probably get by with a dummy pickup in the bridge... On the the stacked Jazz how was the stack configured? I have a stacked on another guitar and I wired it bottom volume/top tone. Other way round 1 Quote Link to comment Share on other sites More sharing options...
Geek99 Posted November 29, 2019 Share Posted November 29, 2019 17 minutes ago, AngelDeVille said: I had an ex-wife like that. She speaks very highly of you though - when she is talking of course 😒 1 Quote Link to comment Share on other sites More sharing options...
AngelDeVille Posted November 29, 2019 Author Share Posted November 29, 2019 13 minutes ago, Geek99 said: She speaks very highly of you though - when she is talking of course 😒 Quote Link to comment Share on other sites More sharing options...
paul_5 Posted November 29, 2019 Share Posted November 29, 2019 WRT the stacked knob wiring I’d put the one that you use the most on the top-it’s easier to get hold of that one on a gig. 1 Quote Link to comment Share on other sites More sharing options...
AngelDeVille Posted November 29, 2019 Author Share Posted November 29, 2019 3 minutes ago, paul_5 said: WRT the stacked knob wiring I’d put the one that you use the most on the top-it’s easier to get hold of that one on a gig. I may have to experiment, pinky on the body is how I turn the controls most of the time. Quote Link to comment Share on other sites More sharing options...
itu Posted November 29, 2019 Share Posted November 29, 2019 A PRS-type tone switch? 1 Quote Link to comment Share on other sites More sharing options...
Hellzero Posted November 30, 2019 Share Posted November 30, 2019 A straight to the jack wiring through a 3 way switch and basta. Works fine. The question you should ask yourself is : Do I sometimes use the volume or the tone ? 1 Quote Link to comment Share on other sites More sharing options...
AngelDeVille Posted December 1, 2019 Author Share Posted December 1, 2019 (edited) On 29/11/2019 at 16:44, itu said: A PRS-type tone switch? I’m not sure what that is. Is it like a vari-tone? On 30/11/2019 at 03:08, Hellzero said: A straight to the jack wiring through a 3 way switch and basta. Works fine. The question you should ask yourself is : Do I sometimes use the volume or the tone ? I use the volume more dynamically than tone, tone is either on zero or 11. thats why I think I could go straight to jack and have a master volume and blend. on another 2 pickup bass I have 2 volume/straight to jack, and may convert it. I had a guitar with a vari-tone. It was a 7 position tone control with a chicken head knob, I only liked 3 and 7. I’ll research components for the vari-tone, that could work as well master vol/blend/vari-tone. But same or more components as my original though.. and probably more complicated. Edited December 1, 2019 by AngelDeVille Quote Link to comment Share on other sites More sharing options...
itu Posted December 1, 2019 Share Posted December 1, 2019 PRS has this simple switch that controls tone on/off. You could do a bit similar with a capacitor and a trimmer (Smith may have had a coil in the circuitry, too). When the switch connects the components to the signal line, you get a preset tone you want, as you can adjust the trimmer to your preference. When the switch is off, the parts are not in the signal route. 1 Quote Link to comment Share on other sites More sharing options...
AngelDeVille Posted December 2, 2019 Author Share Posted December 2, 2019 3 hours ago, itu said: PRS has this simple switch that controls tone on/off. You could do a bit similar with a capacitor and a trimmer (Smith may have had a coil in the circuitry, too). When the switch connects the components to the signal line, you get a preset tone you want, as you can adjust the trimmer to your preference. When the switch is off, the parts are not in the signal route. ohh that sounds nice! I’ll have to research how it’s done. Quote Link to comment Share on other sites More sharing options...
itu Posted December 2, 2019 Share Posted December 2, 2019 A DPDT switch, a trimmer, and a capacitor. Simple as that. Quote Link to comment Share on other sites More sharing options...
AngelDeVille Posted December 3, 2019 Author Share Posted December 3, 2019 My second pickup just arrived and I made a command decision earlier to order a couple blend pots. So officially she is going to be master vol/blend/tone. It seems to be the least complicated way to go, and I’m familiar with its use. Quote Link to comment Share on other sites More sharing options...
AngelDeVille Posted December 8, 2019 Author Share Posted December 8, 2019 (edited) This isn’t the bass I had started the thread about, but I just completed changing the controls. It started out as someone else’s project, and had vol/vol/some kind of switch/stereo jack.... She has a Dimarzio Will Power in the neck, and I switched the Pbass pickup to the Duncan Design I had for the other project. Dimarzio measured 13k, Duncan design was a whopping 15k so I figured they would balance better than the 5k one that was in it. volume/blend/tone. I’m considering replacing the scratchplate in the future because there is an extra hole from the switch and I can improve the spacing of the knobs, but I’m not sure I can improve the color. I used a 500k volume, 250k blend, 500k tone with a .033 cap. She sounds beautiful. I was worried I needed a 500k blend and a 250k tone. Edited December 8, 2019 by AngelDeVille Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.