marcblum Posted December 9, 2019 Share Posted December 9, 2019 Chunk Systems Octavius Squeezer (defective) build in Australia very rare analoge bass synth with digital control system very good sounds unfortunately hangs up after a while price: 100€, shipping cost depends on destination, Germany included Link to comment Share on other sites More sharing options...
Bo0tsy Posted December 9, 2019 Share Posted December 9, 2019 These are great analogue synth pedals... Just wondering if it is your power supply that is defective here? If the Octavius Squeezer is not getting consistent power they can crash as they are sensitive to the quality of power being supplied. I had freezing issues previously when I daisy chained it and the voltage sagged a little. Try with a different stand alone 9v power supply (minimum 300mA) or a 9v battery and see if you still have the same issue. Otherwise it might just be a case of reloading the v10 firmware or it could even be a memory card causing the issue, so try removing it from the slot if you have one inserted. 1 Link to comment Share on other sites More sharing options...
marcblum Posted December 9, 2019 Author Share Posted December 9, 2019 Thanks for the hints! Link to comment Share on other sites More sharing options...
marcblum Posted December 9, 2019 Author Share Posted December 9, 2019 It's been many years since I struggled with this pedal. Tested it now with a new generation of power supplies (Cioks DC10 with OS connected alone). Firmware is v11. No card inserted. No way, after several minutes of playing it just hangs. Link to comment Share on other sites More sharing options...
Bo0tsy Posted December 9, 2019 Share Posted December 9, 2019 Shame it was worth a try. Link to comment Share on other sites More sharing options...
marcblum Posted December 9, 2019 Author Share Posted December 9, 2019 yup Link to comment Share on other sites More sharing options...
berme Posted December 9, 2019 Share Posted December 9, 2019 Did you try to power it with the 9v/400 ma output in your DC10? The amperage is extremely important to get right with the Squeezer. Link to comment Share on other sites More sharing options...
marcblum Posted December 10, 2019 Author Share Posted December 10, 2019 Yes I did so Link to comment Share on other sites More sharing options...
Recommended Posts