Woodinblack Posted January 1, 2020 Share Posted January 1, 2020 5 hours ago, stewblack said: Effects pedals. Big muff, HPF, octaver and auto wah generally OK, I wondered if you were doing the stomp thing. I have all my effects in line before the amp, but I did think of doing the 4 wire thing with the HX Effects, as that way I could use the overdrive of the first preamp valve as an effect, which might sound good. Trouble is I would need to replicate the patch as I don't use my CTM often. Quote Link to comment Share on other sites More sharing options...
stewblack Posted January 1, 2020 Share Posted January 1, 2020 4 hours ago, pete.young said: Stew,, is the effects loop series or parallel? I can only assume series. Put it this way it sounds exactly the same going from fx to input as it does using the loop Quote Link to comment Share on other sites More sharing options...
stewblack Posted January 1, 2020 Share Posted January 1, 2020 33 minutes ago, Woodinblack said: OK, I wondered if you were doing the stomp thing. I have all my effects in line before the amp, but I did think of doing the 4 wire thing with the HX Effects, as that way I could use the overdrive of the first preamp valve as an effect, which might sound good. Trouble is I would need to replicate the patch as I don't use my CTM often. This is an interesting idea... Quote Link to comment Share on other sites More sharing options...
pete.young Posted January 1, 2020 Share Posted January 1, 2020 (edited) 3 minutes ago, stewblack said: I can only assume series. Put it this way it sounds exactly the same going from fx to input as it does using the loop When the effects are in the loop, if you unplug a cable in the middle of the effects chain, does the noise stop or does it carry on? Edited January 1, 2020 by pete.young Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted January 1, 2020 Share Posted January 1, 2020 Just now, stewblack said: I can only assume series. Put it this way it sounds exactly the same going from fx to input as it does using the loop Oh yes, that bit. it does, the input goes into one side of a ECC832 valve and the output of that goes to the send. Under normal circumstances, the send output is shorted to the return input which then goes to the gain control. Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted January 1, 2020 Share Posted January 1, 2020 1 minute ago, pete.young said: If you unplug a cable in the middle of the effects chain, does the noise stop or does it carry on? It will stop - there is a break when send is plugged in. Quote Link to comment Share on other sites More sharing options...
pete.young Posted January 1, 2020 Share Posted January 1, 2020 3 minutes ago, Woodinblack said: It will stop - there is a break when send is plugged in. It'll stop if it's a series loop. If it's a parallel loop, there's a blend of loop and pre-amp signal gets sent to the power section, so the dry signal will still be heard. If it is a parallel loop, you probably don't want to put a HPF in the loop, which is where I was going with this. You want certain effects to affect the whole of your signal, not 50% of it. Quote Link to comment Share on other sites More sharing options...
stewblack Posted January 1, 2020 Share Posted January 1, 2020 11 minutes ago, pete.young said: It'll stop if it's a series loop. If it's a parallel loop, there's a blend of loop and pre-amp signal gets sent to the power section, so the dry signal will still be heard. If it is a parallel loop, you probably don't want to put a HPF in the loop, which is where I was going with this. You want certain effects to affect the whole of your signal, not 50% of it. I assumed if it was parallel I'd hear a clean signal too. Very good point about the HPF. Same for compression I assume. Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted January 1, 2020 Share Posted January 1, 2020 28 minutes ago, stewblack said: This is an interesting idea... I was looking at the input and I am not sure if it will work now. My original assumption was that the input stage was being overloaded so you could switch between putting loads of signal in the input, and reducing in the send return loop, or less signal in the input and more in the send return,. but looking at it, it doesn't look like you could overload the input. I know if I put a bass in the lo input and turn the gain past 1/3 it will start to saturate, whereas in high it pretty well doesn't until you get to flat out, but now I see the gain control is after send / return, so its the second valve that is used for saturating. I suppose the idea could still hold with a greatly reduced input and flat out gain. Quote Link to comment Share on other sites More sharing options...
stewblack Posted January 1, 2020 Share Posted January 1, 2020 20 minutes ago, Woodinblack said: I was looking at the input and I am not sure if it will work now. My original assumption was that the input stage was being overloaded so you could switch between putting loads of signal in the input, and reducing in the send return loop, or less signal in the input and more in the send return,. but looking at it, it doesn't look like you could overload the input. I know if I put a bass in the lo input and turn the gain past 1/3 it will start to saturate, whereas in high it pretty well doesn't until you get to flat out, but now I see the gain control is after send / return, so its the second valve that is used for saturating. I suppose the idea could still hold with a greatly reduced input and flat out gain. I ran my gain almost flat out last night. Best sound I've ever had from the CTM, bass I used isn't that loud effects level not too high. Quote Link to comment Share on other sites More sharing options...
TheRev Posted January 2, 2020 Share Posted January 2, 2020 On Weymouth quay at midnight. Buzzing crowd and very few fights (for Weymouth). 5 Quote Link to comment Share on other sites More sharing options...
EBS_freak Posted January 2, 2020 Share Posted January 2, 2020 This thread needs more pics! Quote Link to comment Share on other sites More sharing options...
cetera Posted January 2, 2020 Share Posted January 2, 2020 (edited) I depped with SE England corporate/function stalwarts the Co-Stars at Eastbourne's stunning 5* Grand Hotel. Great fun evening & I was required to wear a tux & panama! 😉 Edited January 2, 2020 by cetera 1 Quote Link to comment Share on other sites More sharing options...
EBS_freak Posted January 2, 2020 Share Posted January 2, 2020 @cetera - could they get a deeper stage?! That one gives the one I had to perform on a run for it's money! (I say stage, piece of carpet between the wall and the most important startlit dancefloor... (why do people not realise when putting up said floors you have to leave space for the band... and plugs)) Quote Link to comment Share on other sites More sharing options...
cetera Posted January 2, 2020 Share Posted January 2, 2020 5 minutes ago, EBS_freak said: @cetera - could they get a deeper stage?! That one gives the one I had to perform on a run for it's money! (I say stage, piece of carpet between the wall and the most important startlit dancefloor... (why do people not realise when putting up said floors you have to leave space for the band... and plugs)) It was indeed a bit slim! lol! Apparently it's getting smaller every year.... along with the 'budget'.... ! Quote Link to comment Share on other sites More sharing options...
fleabag Posted January 2, 2020 Share Posted January 2, 2020 Finally, it appears someone took a short video but no photos What The Funk ( us ) at NYE Buckingham move on up.mp4 10 Quote Link to comment Share on other sites More sharing options...
EBS_freak Posted January 2, 2020 Share Posted January 2, 2020 @fleabag sounding nice 1 Quote Link to comment Share on other sites More sharing options...
fleabag Posted January 2, 2020 Share Posted January 2, 2020 (edited) Thanks pal. You can see i appear to be missing, but you can just catch a glimpse of my Aria Pro SB900 for about 3 seconds, behind the gitwrist. Thats cos i recently came out of hospital after hip surgery and i was still on crutches, so had to sit on a stool. Ah... what us bass twangers will do for a gig 😎 Edited January 2, 2020 by fleabag 4 Quote Link to comment Share on other sites More sharing options...
Oopsdabassist Posted January 2, 2020 Share Posted January 2, 2020 Was gonna say...sitting down on the job....bad form old fruit. Excuse accepted in this instance 😋 1 Quote Link to comment Share on other sites More sharing options...
stingrayPete1977 Posted January 2, 2020 Author Share Posted January 2, 2020 5 hours ago, EBS_freak said: This thread needs more pics! I realised after starting the thread that I might not have any pictures as I would be too busy playing, whoops. Quote Link to comment Share on other sites More sharing options...
EBS_freak Posted January 3, 2020 Share Posted January 3, 2020 13 hours ago, stingrayPete1977 said: I realised after starting the thread that I might not have any pictures as I would be too busy playing, whoops. That’s always the trouble isn’t it? 1 Quote Link to comment Share on other sites More sharing options...
EBS_freak Posted January 3, 2020 Share Posted January 3, 2020 On 01/01/2020 at 20:19, Mudpup said: Local pub about 20 mins away that we do about 3 or 4 times a year. Great landlord, ticket only, lovely punters, food and bar tab for the band. We couldn't have asked for a better one apart from the singist struggling to get his voice back after the local virus had clobbered him a few days back. Ooh and it was the first time out for my new 4 string G&L L2000 - i enjoyed playing it on the night and having had a listen to the video through headphones i'm really happy with my sound. Loads of positive feedback from everyone so we're all smiling rabbits today apart from the singer who has 2 days to get rid of his Barry White voice before the next one 🙂 Thats commitment hauling around a drum screen! Those things weight as much as the planet! Quote Link to comment Share on other sites More sharing options...
Mudpup Posted January 3, 2020 Share Posted January 3, 2020 3 minutes ago, EBS_freak said: Thats commitment hauling around a drum screen! Those things weight as much as the planet! Good to hide behind when it gets rowdy though 😂 The bas**rd drummer has it in a flightcase too!!!!! Quote Link to comment Share on other sites More sharing options...
Bluewine Posted January 3, 2020 Share Posted January 3, 2020 New Years Eve 2019 Blue 3 Quote Link to comment Share on other sites More sharing options...
stingrayPete1977 Posted January 3, 2020 Author Share Posted January 3, 2020 Very nice G&L there blue. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.