FS/ trade Yamaha Emx 5000-12 powered mixer £500 Mansfield

[Stofferson]

Great condition, rugged powerhouse.

Great for a band or artist. All channels and effect's fully working with no issues.

Mono channel lpf nob missing, still work with a screw driver if needed in mono applications.

Trades where applicable for:

Good quality 2x10 bass cab to modulate with my Bf 4x10.

Or

Ashdown Original or similar head plus cash my way

Or

IEC powered power supply for pedal boards e.g. T rex classic fuel tank plus cash my way etc.

 

 

Maximum Output Power @0.5% THD at 1kHz:
500W+500W/4ohms
325W+325W/8ohms
1000W/8ohms bridge

Input Connectors:
CH1-8: XLR and TRS Phone
CH9/10, 11/12: 2 x Phones and 2 x RCA Phone

Channel Inserts: 8 (mono channels)

EQ (Mono CH)
High: 10kHs shelving
Mid: 250Hz-5kHz peaking
Low: 100Hz shelving

EQ (Stereo CH)
High: 10kHs shelving
Mid: 2.5kHz peaking
Low: 100Hz shelving

Aux Sends: 4 (2 Aux (pre/Post), 2 Effect

Phantom Power: +48V

Graphic Equalizer: 9-band (63, 125, 250, 500, 1k, 2k, 4k, 8k 16k Hz)

Digital Effects: SPX Digital Multi Effector (24-bit AD/DA, 32-bit Internal Processing)

Effect1 (16 programs):
Reverb hall
Reverb room
Reverb plate
Reverb vocal 1
Reverb vocal 2
Vocal echo 1
Vocal echo 2
Delay 1
Delay 2
Mod delay
Reverse gate
Pitch change
Chorus
Phaser
Radio voice
Tremolo

Effect1 (16 programs):
Reverb hall
Reverb room
Reverb plate
Reverb vocal 1
Reverb vocal 2
Vocal echo 1
Vocal echo 2
Delay 1
Delay 2
Early ref.
Gate reverb
Vocal doubler
Symphonic
Flange
Distortion
Tape delay

Power Amp. Mode:
ST L + ST R
Aux1 + Mono
Aux1 + Aux2

Power Select Switch: 500W/300W/100W

Meters: 2 x 13 points

Yamaha Speaker Processing: Yes

Low Pass Filter: Yes (Mono Out)

Stand-By Switch: Yes

Lamp Connector: Yes (XLR 3 pins)

Foot Switch: Effect On/Off, TAP

Dimensions (W x H x D): 26-7/8 x 6-1/4 x 213/16 in.

Weight: 41.9 lbs.

Power Requirements/Consumption: 120V AC 60Hz 300W

[Stofferson]

£250 must go