GreeneKing Posted January 23, 2020 Share Posted January 23, 2020 Hello Ive had my BG250 for quite a few years, from new. It’s only been used for for home practice and it’s been ultra reliable. This morning I turned it on and no sound. Plenty of lights illuminated and no buttons on the panel are working. No smoke, smell or snap crackle and pop. The gain light is permanently on as is the Tubedrive light, a couple of tuner lights, the low tune light and the power light. When I power the amp down it takes a full 9 seconds for the lights to go out. Much longer than normal. Does anyone have similar experience or ideas? I’m looking at an Orange Crush 50 on Saturday. If anyone has any suggestions I’ll have a look at the BG250 tomorrow. Peter Quote Link to comment Share on other sites More sharing options...
BassBunny Posted January 23, 2020 Share Posted January 23, 2020 You could try a firmware update Peter. Failing that the likelihood is having to send it to Real Electronics in Sheffield as there is nothing user serviceable in the amp section. Main board is about £45, plus £69 labour and £18 carriage to send it back. 1 Quote Link to comment Share on other sites More sharing options...
GreeneKing Posted January 24, 2020 Author Share Posted January 24, 2020 Thank you Stu. For what is and most likely will ever be, a home practice amp it makes more sense to replace it in my opinion. With the totally inert nature of the beast I suspect that a firmware update won't work but I will try. I've got a Palmer pre-amp with an auxiliary input and I'll try that into my spare head and one Accugroove cab as that might be a way of getting an Aux in that I use with my Tascam a lot. Peter Quote Link to comment Share on other sites More sharing options...
gary mac Posted January 24, 2020 Share Posted January 24, 2020 (edited) I attempted to repair one of these for a customer but without success. I couldn't get parts or even a schematic. As @BassBunnysaid, Real Electronics are the only real viable option. I came to the same conclusion as you, in that, it's not worth it. Edited January 24, 2020 by gary mac 1 Quote Link to comment Share on other sites More sharing options...
GreeneKing Posted January 24, 2020 Author Share Posted January 24, 2020 Much appreciated Gary. 1 Quote Link to comment Share on other sites More sharing options...
lownote Posted January 24, 2020 Share Posted January 24, 2020 No idea why people buy TC. I had one of their amps and it did much what you describe for no reason. Real charged me almost as much as it cost to fix it. 1 Quote Link to comment Share on other sites More sharing options...
gary mac Posted January 24, 2020 Share Posted January 24, 2020 I think one of the problems with these amps ( like with plenty of other equipment), is that they don't react well to electrical fluctuations/surges. I've now seen a couple that have failed when being used on stages, where the supply has been provided via a generator. Quote Link to comment Share on other sites More sharing options...
GreeneKing Posted January 24, 2020 Author Share Posted January 24, 2020 I'll offer the BG250 free on collection locally as spares or repairs. The tip is next. I tried my spare head and my 2nd Accugroove with a Palmer pre that has an aux in. It all works perfectly. tcElectronic watts are a lot smaller that EBS watts though...... Quote Link to comment Share on other sites More sharing options...
stewblack Posted January 24, 2020 Share Posted January 24, 2020 3 hours ago, lownote12 said: No idea why people buy TC. I had one of their amps and it did much what you describe for no reason. Real charged me almost as much as it cost to fix it. I didn't realise this applies to TCE as well. I knew Markbass stuff cannot be maintained except by post for vast expense. Is all class D stuff the same? Quote Link to comment Share on other sites More sharing options...
BassBunny Posted January 24, 2020 Share Posted January 24, 2020 (edited) 7 hours ago, stewblack said: I didn't realise this applies to TCE as well. I knew Markbass stuff cannot be maintained except by post for vast expense. Is all class D stuff the same? Ashdown will fix any of there products, old or new, including Class D. The problem is not if it can be fixed or not, it's getting the circuit diagrams so you can find the fault Most manufacturers won't release them. Add the fact that modern production techniques use surface mount technology and a circuit board swap is easier for them It looks like the older class A/B MarkBass heads can be fixed. My SA450 has been with an amp tech for a few days and it's on a soak test at the moment. Apparently fixed. Edited January 24, 2020 by BassBunny 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.