Guest Posted January 28, 2020 Share Posted January 28, 2020 (edited) Selling this like-new Earthquaker Devices Plumes. Used only a few times live, the pedal works perfectly and just selling as it's not the drive sound I'm after. It's basically a high-end Tube Screamer with increased headroom (no low-end loss!), a very usable tone control, and three clipping modes (symettrical, asymmetrical, and clean boost). The footswitch is extremely quiet and has EQD's Flexi-Switch technology. Comes with a nice EQD pedal pouch. Collection in London or shipment + shipping expenses please. Here are the official specs: Tech Specs Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs Current Draw: 25 mA Input Impedance: 10 MΩ Output Impedance: 100 Ω Flexi-Switch® Technology This device features Flexi-Switch® Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching. For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass. For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed. Since the switching is relay based, it requires power to pass signal. Power This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES! Edited January 30, 2020 by loremil Link to comment Share on other sites More sharing options...
Recommended Posts