Knibby Posted February 24, 2020 Share Posted February 24, 2020 Hi all. Some advise/help needed. Long story short, have I got the 2 off cabs cabled up correctly, not sure on the ohms configuration running parallel etc. Any advise would be appreciated if I’ve got it wrong. Many Thanks. Quote Link to comment Share on other sites More sharing options...
jrixn1 Posted February 24, 2020 Share Posted February 24, 2020 Yep, you've done it completely correctly. For info - each cab is 8ohms, and you have indeed connected them in parallel. Quote Link to comment Share on other sites More sharing options...
Knibby Posted February 24, 2020 Author Share Posted February 24, 2020 Hi JR Thank-you very much for the reply, appreciated. Can crank it up now and p*** the neighbourhood off, only joking but 👍. Shaun Quote Link to comment Share on other sites More sharing options...
BassmanPaul Posted April 7, 2020 Share Posted April 7, 2020 On 24/02/2020 at 14:20, jrixn1 said: Yep, you've done it completely correctly. For info - each cab is 8ohms, and you have indeed connected them in parallel. Which makes the load 4Ω so don't try to add a third box. Quote Link to comment Share on other sites More sharing options...
BassmanPaul Posted April 7, 2020 Share Posted April 7, 2020 A lot of folk think that daisy chaining from one cab to another cab is a series connection and the impedances would add. This is incorrect as such a connection is still parallel wiring. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.