Jus Lukin Posted April 1, 2020 Share Posted April 1, 2020 (edited) - Edited March 4, 2022 by Jus Lukin Quote Link to comment Share on other sites More sharing options...
Bill Fitzmaurice Posted April 1, 2020 Share Posted April 1, 2020 Varying the size of a sealed cab by a moderate amount has little effect on the result. Quote Link to comment Share on other sites More sharing options...
Balcro Posted April 1, 2020 Share Posted April 1, 2020 A rough and ready modelling for two S2012's would suggest an internal volume of the new 2x12 cab at about 80 / 85 litres. I don't think there will be a big difference in overall size for two 2x12's compared with one 4x12. Received wisdom is that for best dispersion it's best to stack one 2x12 on top of another, but stability and the width of the 1960 may dictate otherwise. Consider the Resitance (Ohms) rating of the individual Basslites. Probably each one is 8 Ohm. If your 1960 has 2 parallel & switchable jack speaker outlets then you should wire each 2x12 in "Series/Parallel" configuration to give them an 8 Ohm rating and a theoretical power handling of 300w. With two 2x12's wired up, move the switch to the 4 Ohm impedance setting as per the manual. Quote Link to comment Share on other sites More sharing options...
Jus Lukin Posted April 1, 2020 Author Share Posted April 1, 2020 (edited) - Edited March 4, 2022 by Jus Lukin Quote Link to comment Share on other sites More sharing options...
Balcro Posted April 2, 2020 Share Posted April 2, 2020 Hi Jus Lukin, Sorry, my mistake 😧 . With only two drivers it has to be as you say; wire in series for 16 Ohms per cabinet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.