Cathode_Follower Posted April 29, 2020 Share Posted April 29, 2020 (edited) I've been wanting to build a high quality power brick for a while, and seem to have a lot of time on my hands at present so decided to pull the trigger. Spec would be 8 x fully isolated and regulated 9v outputs each capable of supplying at least 200mA. Back-of-envelope calculation puts the total project cost at somewhere around £70, roughly half of what you'd pay for a retail unit with similar features To achieve this I would like to order a WPDLXFMR-2 from Weber in the US (https://www.tedweber.com/wpdlxfmr-2) very reasonably priced at $25. However, delivery to the UK for a single transformer comes out at $80..! Are there any DIY-ers who'd also be interested in embarking on one of these power supplies? If so we can bulk-order a bunch of these Webers and bring the unit price down to something reasonable. I think we would need at least 5 of us to get the project cost down to the £70 stated above, but the more the merrier of course. Edited April 29, 2020 by Cathode_Follower Quote Link to comment Share on other sites More sharing options...
stewblack Posted April 29, 2020 Share Posted April 29, 2020 Is this for financial reasons, or for the pleasure of a self build? Quote Link to comment Share on other sites More sharing options...
Cathode_Follower Posted April 29, 2020 Author Share Posted April 29, 2020 Both! Also I like the security of being able to over-engineer the bejeezus out of something and know that it's never going to die on you at an inconvenient moment. If it does die it's also far easier to repair if you made it yourself. Quote Link to comment Share on other sites More sharing options...
stewblack Posted April 29, 2020 Share Posted April 29, 2020 20 minutes ago, Cathode_Follower said: Both! Also I like the security of being able to over-engineer the bejeezus out of something and know that it's never going to die on you at an inconvenient moment. If it does die it's also far easier to repair if you made it yourself. Ah that's fine. Was going to recommend a good one for about the same price new. But nowhere near as much fun, and as you say you get to choose the components this way. Quote Link to comment Share on other sites More sharing options...
Cathode_Follower Posted April 29, 2020 Author Share Posted April 29, 2020 You've piqued my interest. I'd be very interested to see the specs if you have a link? Quote Link to comment Share on other sites More sharing options...
stewblack Posted April 29, 2020 Share Posted April 29, 2020 https://www.thomann.de/gb/harley_benton_powerplant_iso_2_pro.htm Quote Link to comment Share on other sites More sharing options...
Noisyjon Posted April 29, 2020 Share Posted April 29, 2020 (edited) 8 minutes ago, stewblack said: https://www.thomann.de/gb/harley_benton_powerplant_iso_2_pro.htm Beware - I have that PSU and the 6x non-switchable 9V outlets are 300mA combined, not per outlet. I found out the hard way! Edited April 29, 2020 by Noisyjon Expansion! Quote Link to comment Share on other sites More sharing options...
Cathode_Follower Posted April 29, 2020 Author Share Posted April 29, 2020 1 minute ago, Noisyjon said: Beware - I have that PSU and the 6x non-switchable 9V outlets are 300mA combined, not per outlet. I found out the hard way! Interesting, they do *claim* that they are individually isolated? Quote Link to comment Share on other sites More sharing options...
stewblack Posted April 29, 2020 Share Posted April 29, 2020 Ah I have been misled on this, thank you @Noisyjon Quote Link to comment Share on other sites More sharing options...
Noisyjon Posted April 29, 2020 Share Posted April 29, 2020 I had a tuner, boost and EQ plugged up and all was well. I then bought 2x TC pedals (HoF2 and Flashback2) and one was plugged into a switched output (and was fine) but the one on the non-switchable outlet wasn't working properly. After a chat with a knowledgeable fellow I tried the other TC pedal on the other switched output and bingo, it worked perfectly! He said this is not uncommon and a grey area. YMMV, etc but just a heads up Quote Link to comment Share on other sites More sharing options...
Cathode_Follower Posted April 29, 2020 Author Share Posted April 29, 2020 I'll pass! Thanks for the info Quote Link to comment Share on other sites More sharing options...
stewblack Posted April 29, 2020 Share Posted April 29, 2020 18 minutes ago, Cathode_Follower said: Interesting, they do *claim* that they are individually isolated? They are isolated. I watched a guy take one apart and run a meter over it Quote Link to comment Share on other sites More sharing options...
Cathode_Follower Posted April 29, 2020 Author Share Posted April 29, 2020 16 minutes ago, stewblack said: They are isolated. I watched a guy take one apart and run a meter over it Fair enough! I had assumed that if there was a total combined current rating for the outputs then they couldn't all be running from dedicated switching supplies. Shows how much I know about such things! Quote Link to comment Share on other sites More sharing options...
AJ567 Posted April 29, 2020 Share Posted April 29, 2020 There's a note on the Thomann product page saying that the total load cannot exceed 18W. So you can exceed neither the stated 300/500mA from any single output, nor 2000mA in total (assuming you are running only 9v pedals - less if you are using higher voltages on the switchable outputs). But they are all isolated outs! 2 Quote Link to comment Share on other sites More sharing options...
AJ567 Posted April 29, 2020 Share Posted April 29, 2020 @Noisyjon HoF2 needs more than 300ma so would only work on one of the switchable outs. Was that your issue by any chance? 1 Quote Link to comment Share on other sites More sharing options...
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.