Frank Blank Posted May 12, 2020 Posted May 12, 2020 I have just taken the stacked knobs off my ACG (they needed a clean) and I've discovered that a couple of them (two out of three of the stacked knobs) had springs between the upper and lower knob, the remaining stacked know had no spring. Are these springs usually to be found between the knobs like this, I suppose I should ask @skelf really. Having done the same previously with the Harlot it had no springs in the stacked knobs. Quote
skelf Posted May 12, 2020 Posted May 12, 2020 The springs are there to ground the upper knob to the pot lower ring. It was previously not needed because the knobs were brass but with the move to aluminium John found that they needed the spring to be fully grounded so were added. Should be a spring in all of the knobs. It also depends on the type of preamp the EQ01 is less prone to this issue. John explained why but there is a reason he does the preamps and I don’t. Quote
Frank Blank Posted May 12, 2020 Author Posted May 12, 2020 6 minutes ago, skelf said: The springs are there to ground the upper knob to the pot lower ring. It was previously not needed because the knobs were brass but with the move to aluminium John found that they needed the spring to be fully grounded so were added. Should be a spring in all of the knobs. It also depends on the type of preamp the EQ01 is less prone to this issue. John explained why but there is a reason he does the preamps and I don’t. Cheers Alan. The springs were in the short scale Recurve which has the East UNI-PRE 4K preamp, any idea where I can get a replacement spring? Quote
skelf Posted May 12, 2020 Posted May 12, 2020 I actually don’t have any at the moment. I am not sure where John gets them from or if they are made for him. Maybe drop him a line and ask. Quote
Frank Blank Posted May 12, 2020 Author Posted May 12, 2020 33 minutes ago, skelf said: I actually don’t have any at the moment. I am not sure where John gets them from or if they are made for him. Maybe drop him a line and ask. I have done just that, cheers Alan. Quote
Frank Blank Posted May 12, 2020 Author Posted May 12, 2020 6 hours ago, skelf said: I actually don’t have any at the moment. I am not sure where John gets them from or if they are made for him. Maybe drop him a line and ask. I received a prompt reply from John, thanks again. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.