Si600 Posted May 26, 2020 Share Posted May 26, 2020 I'm putting flats on my P-Bass, in fact the first flats on any bass I've owned this weekend. Are there any things I need to do/change or is it the same as changing like for like? D'addario Chrome's if that helps. Quote Link to comment Share on other sites More sharing options...
Silvia Bluejay Posted May 26, 2020 Share Posted May 26, 2020 Re-do the intonation and adjust the action/saddle height to your liking. There is usually a marked difference between rounds and flats, on the same bass, even when their gauges are similar. Takes a bit of patience at first, but Chromes settle rather quickly. 1 Quote Link to comment Share on other sites More sharing options...
Happy Jack Posted May 26, 2020 Share Posted May 26, 2020 Then enjoy the fact that you will never (as in NEVER) need to buy another set of strings. 1 3 Quote Link to comment Share on other sites More sharing options...
gary mac Posted May 26, 2020 Share Posted May 26, 2020 I would advise you not to cut the G or D strings, use the full length. 2 Quote Link to comment Share on other sites More sharing options...
Delberthot Posted May 26, 2020 Share Posted May 26, 2020 I use Chromes on my Precision and absolutely love them. Their quite bright for flats but this can easily be sorted by using the tone control depending on what sort of sound you are looking for. I always cut the strings on my basses whether flats or rounds. granted, on the G that's only about an inch or so but I still do it 1 Quote Link to comment Share on other sites More sharing options...
Maude Posted May 31, 2020 Share Posted May 31, 2020 If you think they feel odd at first, kind of grippy and a bit rough, not like the silky smooth flats you'd heard about, don't worry. Just keep playing and they'll improve over time. Chromes can feel like this to start with. 🙂 Quote Link to comment Share on other sites More sharing options...
KiOgon Posted May 31, 2020 Share Posted May 31, 2020 Before fitting flats, get a cotton pad with IPA or Surgical Spirits, even Meths and rub all the crap off before fitting, Mostly machine oils from the manufacturing process, but they'll feel a whole lot better, so will your fingers. 1 Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted May 31, 2020 Share Posted May 31, 2020 16 minutes ago, KiOgon said: get a cotton pad with IPA or Surgical Spirits, even Meths Good advice there, I’ve only ever used flats from the early 80s and some brands can feel a bit tacky, I’ve found labella’s are ok , but I tried fender flats and they were almost sticky but a quick wipe with alcohol wipes and they were fine. Quote Link to comment Share on other sites More sharing options...
Si600 Posted June 5, 2020 Author Share Posted June 5, 2020 That didn't go as smoothly as I'd hoped, the ball end winding on the B string is too big for the hole in the bridge, either top loaded or through strung. I had to cut it off. They do sound nice though. It's settling at the moment, retune and more play later. Quote Link to comment Share on other sites More sharing options...
Si600 Posted June 5, 2020 Author Share Posted June 5, 2020 Now I've broken the B string 1 Quote Link to comment Share on other sites More sharing options...
ClassicVibes Posted June 5, 2020 Share Posted June 5, 2020 On 26/05/2020 at 19:49, Si600 said: I'm putting flats on my P-Bass, in fact the first flats on any bass I've owned this weekend. Are there any things I need to do/change or is it the same as changing like for like? D'addario Chrome's if that helps. Truss rod adjustment, action at the bridge, action at the nut and then intonation. Anytime you change string gauges, brand or type will require a full set-up. Quote Link to comment Share on other sites More sharing options...
Si600 Posted June 6, 2020 Author Share Posted June 6, 2020 How do I know if the truss rod needs adjusting? Quote Link to comment Share on other sites More sharing options...
chris_b Posted June 6, 2020 Share Posted June 6, 2020 Just change the strings and see what you need to do next. When I replaced the DR Lo-Riders with GHS flats on my Mike Lull PJ5 I didn't have to change anything. And I didn't have to change anything when I replaced the GHS strings with TI flats. 1 1 Quote Link to comment Share on other sites More sharing options...
ClassicVibes Posted June 9, 2020 Share Posted June 9, 2020 On 06/06/2020 at 08:58, Si600 said: How do I know if the truss rod needs adjusting? All of these four steps need to be done when changing string brand, gauge or type. Quote Link to comment Share on other sites More sharing options...
lownote Posted June 9, 2020 Share Posted June 9, 2020 On 31/05/2020 at 20:25, Maude said: If you think they feel odd at first, kind of grippy and a bit rough, not like the silky smooth flats you'd heard about, don't worry. Just keep playing and they'll improve over time. Chromes can feel like this to start with. 🙂 Yeah, the sticky feel goes quickly. Quote Link to comment Share on other sites More sharing options...
ezbass Posted June 9, 2020 Share Posted June 9, 2020 I like to give flat a wipe down with a cloth before fitting. My current Ernie Ball Cobalts weren't too grubby, but my old LaBellas were grim. Quote Link to comment Share on other sites More sharing options...
Jakester Posted June 9, 2020 Share Posted June 9, 2020 18 minutes ago, ClassicVibes said: All of these four steps may need to be done when changing string brand, gauge or type. FIFY 1 Quote Link to comment Share on other sites More sharing options...
ClassicVibes Posted June 9, 2020 Share Posted June 9, 2020 36 minutes ago, Jakester said: FIFY I'll admit the truss rod MAY not have to be adjusted but everything else will definitely need checking. You don't go from standard flats to TIs and expect everything to be hunky dory. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.