donslow Posted June 2, 2020 Share Posted June 2, 2020 (edited) Started painting a 51 precision body today, el Classico butterscotch being the colour of choice not entirely sure what I thought was going to happen once the translucent paint was on but now it is, that dark section of wood is driving me nuts...(Second photo with neck was after I dumped a whole can of paint on it) options... 1. live with it 2. Sand back and paint with solid buttercream with a tinted clear coat to get close to butterscotch 3. go for another colour completely what would you guys and gals do? opinions massively appreciated Edited June 2, 2020 by donslow Quote Link to comment Share on other sites More sharing options...
PinkMohawk Posted June 2, 2020 Share Posted June 2, 2020 If you want to keep that kind of colour, I'd sand it back and go for a solid colour instead. Personal preference would be a dark black stain, but that's just me. Quote Link to comment Share on other sites More sharing options...
donslow Posted June 2, 2020 Author Share Posted June 2, 2020 id prefer to keep that kind of colour, I found these two, both of which look like it could be a close match https://www.manchesterguitartech.co.uk/product/desert-sand-nitrocellulose-lacquer-aerosol/ https://www.manchesterguitartech.co.uk/product/buttercream-nitrocellulose-lacquer-aerosol/ Quote Link to comment Share on other sites More sharing options...
PinkMohawk Posted June 2, 2020 Share Posted June 2, 2020 In that case, yeah, you'd need to strip it back then paint it with the solid colour. You'd need to do a solid primer colour beneath it too, make sure it comes out even as well, otherwise a light colour like this will more than likely still show the colour difference through it. Quote Link to comment Share on other sites More sharing options...
donslow Posted June 2, 2020 Author Share Posted June 2, 2020 If I used a grey primer would that make any difference to the final shade of the solid paint?! Quote Link to comment Share on other sites More sharing options...
PinkMohawk Posted June 2, 2020 Share Posted June 2, 2020 Pretty minimal, I'd imagine. White would be my preference, but if grey was all you had, it'd just uniformly darken the colour just a touch. 1 Quote Link to comment Share on other sites More sharing options...
donslow Posted June 2, 2020 Author Share Posted June 2, 2020 Might help a bit with the colours above Quote Link to comment Share on other sites More sharing options...
robertg43 Posted June 3, 2020 Share Posted June 3, 2020 (edited) I would go #3 1 st then #2 2nd but this is due to Butter Scotch does nothing for me Edited June 3, 2020 by robertg43 Quote Link to comment Share on other sites More sharing options...
bloke_zero Posted June 3, 2020 Share Posted June 3, 2020 (edited) I'd live with it - there is a chinese saying something to do with 'raw silk/uncut wood' - I like seeing the grain and natural colour coming through. Are you going to add a pickguard? I'm guessing not - that would make a big difference. Edited June 3, 2020 by bloke_zero Quote Link to comment Share on other sites More sharing options...
donslow Posted June 3, 2020 Author Share Posted June 3, 2020 Unsure about pickguard at the minute, quite like the plain was of it but then a pickguard also adds a little something, want to get the finish sorted and then decide on the guard really Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted June 3, 2020 Share Posted June 3, 2020 Was is manchesterguitartech you used in the first place, @donslow? If so, then either of the two colours would be fine (if I was going to add the tinted clear, I would personally go for the desert sand) and they could be sprayed directly over this, using this as your primer. The manchesterguitartech paints are good quality and their solids would, I'm pretty sure, cover the shadings after only a couple of coats. If the original is another brand, then yes - sand it fully off first, just in case there are compatibility problems, and use a primer coat, preferably white. Quote Link to comment Share on other sites More sharing options...
Rexel Matador Posted June 3, 2020 Share Posted June 3, 2020 I like it - a real touch of character 1 Quote Link to comment Share on other sites More sharing options...
donslow Posted June 3, 2020 Author Share Posted June 3, 2020 16 minutes ago, Andyjr1515 said: Was is manchesterguitartech you used in the first place, @donslow? If so, then either of the two colours would be fine (if I was going to add the tinted clear, I would personally go for the desert sand) and they could be sprayed directly over this, using this as your primer. The manchesterguitartech paints are good quality and their solids would, I'm pretty sure, cover the shadings after only a couple of coats. If the original is another brand, then yes - sand it fully off first, just in case there are compatibility problems, and use a primer coat, preferably white. The original paint was from northwest guitars, I’m led to believe It’s much the same paint and that there should be no incompatibility issues, new paint arriving tomorrow so we shall see :-s 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.