ClassicVibes Posted June 7, 2020 Posted June 7, 2020 Has in Vintage the brand. A mate has offered to sell his Vintage V4 P copy to me for a song and I'm tempted to make it a little lockdown project. I'm looking to take out the neck and replace it with a Jazz style version and then possibly swap the pickups, bridge, tuners etc. Do Vintage use similar specs to Fender for the neck heels and hardware? Quote
stewblack Posted June 7, 2020 Posted June 7, 2020 I have one I'm happy to take measurements from for you. However, play it first before you take it apart, there is a strong chance you'll like it as it is. They're really nice instruments. If not and the fit is good I'd be interested in the P neck you take off the Vintage. Quote
gary mac Posted June 7, 2020 Posted June 7, 2020 Like Stew says, they are decent instruments. I've just been doing some work on one for a customer. The hardware was all good, as were the pick ups. I did some fret work, smoothing the ends and a little levelling. Also upgraded the pots. It played, looked and sounded great. Quote
Lozz196 Posted June 7, 2020 Posted June 7, 2020 I have the Tony Butler Sig Precision and it’s a very good quality instrument. It was the backup to my US Standard and I fully expected to have to swap the pickups out, however that turned out to not be the case. Aside from putting in better pots/capacitor (thanks Ki0gon) I didn’t need to do anything on it, it’s just a great instrument. 1 Quote
ClassicVibes Posted June 7, 2020 Author Posted June 7, 2020 29 minutes ago, stewblack said: I have one I'm happy to take measurements from for you. However, play it first before you take it apart, there is a strong chance you'll like it as it is. They're really nice instruments. If not and the fit is good I'd be interested in the P neck you take off the Vintage. If you could, that would be great. Especially the neck heel dimensions. Quote
la bam Posted June 7, 2020 Posted June 7, 2020 The newer (newer logo) vintage v4s are very good. All Wilkinson hardware, so you'll struggle without going over the top, to improve it without spending a fortune. They also record very well. Give it a chance first, see what you think. Quote
Geek99 Posted June 7, 2020 Posted June 7, 2020 I have a vintage stingray which awesome right out of the box leave it a while before you fiddle Quote
ClassicVibes Posted June 7, 2020 Author Posted June 7, 2020 I've never used the Wilkinson alnico pups so I will give them a chance. I'm hoping they have a nice vintage flavour to them. Quote
Lozz196 Posted June 7, 2020 Posted June 7, 2020 The ones on my TB sound very similar to the Fender Custom Shop 62s that are on my US Standard. Quote
stewblack Posted June 7, 2020 Posted June 7, 2020 Here you go 16mm x 100mm x 61.5mm. The picture of the 16mm is weird but I've double checked it. The Fender neck is a tiny weeny bit sloppy in there. Can't be much though because my vintage neck fitted in the Fender slot. 2 Quote
police squad Posted June 7, 2020 Posted June 7, 2020 I have 3 Vintage 6 string guitars and they punch so far above their price point. I remember getting a V4 for my brother, probably about 12 years ago and I couldn't believe how good it was out of the box. I should have tried it on a gig before I sent it to him Quote
Deedee Posted June 7, 2020 Posted June 7, 2020 In my experience these are good basses. I've tried a few of their P basses and they've all felt great. I have an old Vintage Stingray clone (that's been out on loan to a mate for about 5 years!) and that plays great too. As has been mentioned already, the pots and jack weren't fantastic but once I'd changed them the stock pickup really sang. Lovely neck on it, really playable. Quote
lownote Posted June 7, 2020 Posted June 7, 2020 My 940FL wot is for sale on ere is a little gem. All wood, well crafted, light as a feather and no training wheels. If they're all like that you're laughing. 1 Quote
barrycreed Posted June 7, 2020 Posted June 7, 2020 I have one of the white P basses. No fault with it. Apparently not all fender necks fit the Vintage bodies ? Quote
ClassicVibes Posted June 7, 2020 Author Posted June 7, 2020 16 minutes ago, barrycreed said: I have one of the white P basses. No fault with it. Apparently not all fender necks fit the Vintage bodies ? I'm hoping that isn't the case! The Jazz neck I have has very similar measurements to what Stew gave above. Quote
Geek99 Posted June 7, 2020 Posted June 7, 2020 6 hours ago, Deedee said: In my experience these are good basses. I've tried a few of their P basses and they've all felt great. I have an old Vintage Stingray clone (that's been out on loan to a mate for about 5 years!) and that plays great too. As has been mentioned already, the pots and jack weren't fantastic but once I'd changed them the stock pickup really sang. Lovely neck on it, really playable. Agree- I have the active one EST96a, was yellow now faded to see-through caramel belter - they still make them 1 Quote
ClassicVibes Posted June 8, 2020 Author Posted June 8, 2020 Can anyone tell me if the control knobs used on Vintage basses are push on versions or if they have a grub screw? 1 Quote
inthedoghouse Posted June 8, 2020 Posted June 8, 2020 After some research and seeing stewblack's photos I'm pretty certain the P body I bought on here a few weeks ago is from a Vintage. It's very light and the neck pocket fits a MiM P neck almost perfectly. I had to shim a touch to alter the neck angle and there's perhaps a credit card thickness gap between the neck and body (I filled it). Quote
ClassicVibes Posted June 8, 2020 Author Posted June 8, 2020 23 hours ago, Lozz196 said: The ones on my TB sound very similar to the Fender Custom Shop 62s that are on my US Standard. If that's the case then I might be keeping them in! Quote
inthedoghouse Posted June 8, 2020 Posted June 8, 2020 23 hours ago, stewblack said: +++++++++++++++++ This photo interests me. Does the pocket on the lower side get a touch wider towards the back of the pocket, or is it just the angle of the photo? In the photo the bottom edge of the pocket doesn't look quite parallel with the line of the paint. I ask because what I take to be my Vintage P body was a touch wider at one end. I sanded just that small part down and refinished it. Quote
gjones Posted June 8, 2020 Posted June 8, 2020 I have a Jazz Bass which has a set of Wilkinson pickups in it and they are surprisingly good. If I had to do a blind test and was told they were Lindy Fralins, I'd believe it. Quote
Ricky 4000 Posted June 8, 2020 Posted June 8, 2020 5 hours ago, ClassicVibes said: Can anyone tell me if the control knobs used on Vintage basses are push on versions or if they have a grub screw? They're push-on on the Vintage J basses. Not sure about the P. Quote
stewblack Posted June 8, 2020 Posted June 8, 2020 1 hour ago, inthedoghouse said: Does the pocket on the lower side get a touch wider towards the back of the pocket, or is it just the angle of the photo? In the photo the bottom edge of the pocket doesn't look quite parallel with the line of the paint. Ah, I didn't notice. I measured in the middle at the deepest point. The bass is reassembled now. 1 Quote
inthedoghouse Posted June 8, 2020 Posted June 8, 2020 3 minutes ago, stewblack said: Ah, I didn't notice. I measured in the middle at the deepest point. The bass is reassembled now. Ok thanks. On mine there was a definite very small bulge towards the heel that was obvious (on fairly close scrutiny) when the neck was on. It's nice and stright now and refinished - looks good. I can't get over how light these poplar bodies are. Quote
jassbass Posted June 8, 2020 Posted June 8, 2020 I have the v74 black reliced jazz.Its very good for a budget bass.No problem with hardware all good. Really nice neck Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.