Jump to content
Why become a member? ×

Mark Bass SA 450 - SOLD
£369


bagsieblue
 Share

Recommended Posts

Mark Bass SA450 Bass Amp - £349 shipped Mainland UK

 
These amps are similar to Markbasses  Little Mark amps but with added semi parametric mids for more tonal versatiity.
 
A few cosmetic scuffs and scrapes on the casing but all works as it should.
 
 
Markbass say:
The SA 450 is our standard, solid-state, professional head. Versatile and packed with features, this head provides more EQ control than the Little Mark II, a line out level control and pre/post EQ switch. Simple and true.
 
 
Specification is:
 
INPUTS

INPUT
impedance: 500 Kohm, max. voltage: 9 Vpp
EFFECT RETURN
impedance: 33 Kohm, max. voltage: 12 Vpp

CONTROLS

GAIN
-80 dB to +25 dB range
LINE OUT
level control on front panel
PRE/POST EQ (for line out)
switch on rear panel
GROUND LIFT
switch on rear panel
MASTER VOLUME

 

EQUALIZATION

LOW
center frequency: 40 Hz; level ±16 dB
LOW-MID
semi-parametric: frequency 100-800 Hz, level ±16 dB
HIGH-MID
semi-parametric: frequency 700 Hz-6 kHz, level ±16 dB
HIGH
10 kHz shelf; level ±16 dB
VPF (Variable Pre-shape Filter) 
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
250 Hz-20 kHz cut

OUTPUTS

EFFECT SEND
unbalanced, max. voltage 12 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 2 Vpp
LINE OUT
balanced XLR, max. voltage 25 Vpp
SPEAKER OUT
speakon, 1/4"

OTHER

HEIGHT
3.39 in. / 8.6 cm (2U)
WIDTH
14.5" / 36.8 cm (with rack ears: 19" / 48.3 cm)
DEPTH
11.9 in. / 30.2 cm
WEIGHT
7.5 lbs / 3.4 kg
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz
(Voltage is factory preset according to region of sale) 

IMG_20200527_142414.jpg

IMG_20200527_142417.jpg

IMG_20200527_142427.jpg

IMG_20200527_142456.jpg

Edited by bagsieblue
Link to comment
Share on other sites

  • 3 weeks later...
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...