hooky_lowdown Posted June 23, 2020 Share Posted June 23, 2020 Does anyone know where I can purchase a set of four cheap tuner bushings, like those used on any precision or jazz copy? Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted June 23, 2020 Share Posted June 23, 2020 (edited) eBay? Or might be able to help... Got a set of machine heads coming for my '£10 Cruiser PB' from a fellow BC member. Going to try and strip them down and just use the new pegs, that way i wont have to make new mounting holes as the plates are a bit different in size... Will see what bits are left over after i've fitted em.. and split the cost with ya... Think they are for an 18mm bore hole. Edited June 23, 2020 by PaulThePlug Quote Link to comment Share on other sites More sharing options...
pst62 Posted June 23, 2020 Share Posted June 23, 2020 I've a set you can have, all I need is your address and they'll on their way tomorrow. PM me. 1 Quote Link to comment Share on other sites More sharing options...
hooky_lowdown Posted June 23, 2020 Author Share Posted June 23, 2020 39 minutes ago, PaulThePlug said: eBay? Or might be able to help... Got a set of machine heads coming for my '£10 Cruiser PB' from a fellow BC member. Going to try and strip them down and just use the new pegs, that way i wont have to make new mounting holes as the plates are a bit different in size... Will see what bits are left over after i've fitted em.. and split the cost with ya... Think they are for an 18mm bore hole. Thanks, yes for 18mm hole. 👍 Quote Link to comment Share on other sites More sharing options...
hooky_lowdown Posted June 23, 2020 Author Share Posted June 23, 2020 Helped out by a very kind BCer. 😀 Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted June 24, 2020 Share Posted June 24, 2020 If it doesn’t work out, I’ve got some your welcome to for free hooky, they are the small ones, about a 12mm hole ☝️ Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted June 24, 2020 Share Posted June 24, 2020 Was just about to say I’ve found 3 if they’re of any use. But you’re sorted 👍🏼 Quote Link to comment Share on other sites More sharing options...
hooky_lowdown Posted June 24, 2020 Author Share Posted June 24, 2020 Thanks guys. Quote Link to comment Share on other sites More sharing options...
dave_bass5 Posted July 2, 2020 Share Posted July 2, 2020 On 23/06/2020 at 19:29, hooky_lowdown said: Does anyone know where I can purchase a set of four cheap tuner bushings, like those used on any precision or jazz copy? I know you’re sorted but i wanted to point out that not all holes are the same. I got some Hipshot recently and although the tuners were fine the bushings were very slightly smaller than the ones that came off the (Fender) bass. Hipshot sent me the correct ones for free though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.