Antipodean Posted July 1, 2020 Share Posted July 1, 2020 Has anyone had problems with the controls on a WAL Pro bass. I didn't appreciate just how unique the knobs were until I tried to get a repair done. There are stalks that connect from the knob to the pot and these have sheared off on a couple of controls. The technician managed to repair these by glueing new ends on so that I could at least play the instrument. I can use all but one control were the glued on part came off. I don't know if WAL still supplies spare parts for these. I sent an email but no response. They might just be busy or in lockdown so I will wait and see. I guess I could probably get someone to custom make the stalks. Anyone else had this problem? Quote Link to comment Share on other sites More sharing options...
gary mac Posted July 1, 2020 Share Posted July 1, 2020 I've found with Wal, that it is better to phone them. Quote Link to comment Share on other sites More sharing options...
Antipodean Posted July 1, 2020 Author Share Posted July 1, 2020 Thanks - I will try phoning them. I managed to write to them and get some parts back in the 90's but I guess that was a while ago when everyone was more patient - at least you had to be if you on the other side of the world. Quote Link to comment Share on other sites More sharing options...
gary mac Posted July 1, 2020 Share Posted July 1, 2020 Good luck, hope you get sorted. Quote Link to comment Share on other sites More sharing options...
customstocker Posted August 29, 2020 Share Posted August 29, 2020 ive got 1 wal pro pot spare Quote Link to comment Share on other sites More sharing options...
4000 Posted September 8, 2020 Share Posted September 8, 2020 I know a Wal Pro owner on here had Wal replace the pots on his Pro with metal shaft ones. You could try asking in one of the main areas (general discussion for instance). Quote Link to comment Share on other sites More sharing options...
Rich Posted September 9, 2020 Share Posted September 9, 2020 I haven't had to replace any of my Pro's pot shafts since my roadie trod on it the 80s. It was easy then, but now I'm not so sure. Paul's always been pretty good at answering emails in the past, I scored some new knobs from him last year via email. I imagine if he's not answering at the moment it will be covid-related somehow. Definitely worth trying the phone. If I'd thought about it back in the day, I'd have ordered more new shafts than I needed so I had some spares. Hindsight eh? Quote Link to comment Share on other sites More sharing options...
4000 Posted September 9, 2020 Share Posted September 9, 2020 I don’t know how feasible it is for you to get the bass to Paul but if I got another Pro (on the wish list) I’d definitely get him to change the pots for metal ones, as I mentioned above. I was always on pins with my last one; I’m a bit weird about having breakable stuff that’s difficult to replace, it doesn’t sit well at all. I want backups for my backups! Quote Link to comment Share on other sites More sharing options...
Petey Posted September 30, 2020 Share Posted September 30, 2020 Contact Paul at the 'Cow Shed' - - really lovely and decent guy will look after you ... Quote Link to comment Share on other sites More sharing options...
garfo Posted October 1, 2020 Share Posted October 1, 2020 The potentiometers for the Wal preamps are quite likely Custom made, so, it would be extremely unlikely to find a proper replacement. Quote Link to comment Share on other sites More sharing options...
Petey Posted October 1, 2020 Share Posted October 1, 2020 Garfo - Paul at the Cow shed IS WAL these days.....he is the man to go to...I believe the pots are German - good luck Quote Link to comment Share on other sites More sharing options...
Fishman Posted October 2, 2020 Share Posted October 2, 2020 I had the same problem with broken pot shafts on a Pro 1e – Paul sent a replacement but I ended up sending the pre-amp to him as I wasn't confident of doing it properly – I think he has older parts in stock as I bought a battery cover replacement too Quote Link to comment Share on other sites More sharing options...
RonC Posted January 19, 2021 Share Posted January 19, 2021 Paul used to have spare ones, years ago I ordered a set for my ProIIe. don't know if he still has them.. Quote Link to comment Share on other sites More sharing options...
chris_b Posted January 19, 2021 Share Posted January 19, 2021 Paul Herman does servicing and repairs, so email him. 1 Quote Link to comment Share on other sites More sharing options...
Fishman Posted January 19, 2021 Share Posted January 19, 2021 6 hours ago, RonC said: Paul used to have spare ones, years ago I ordered a set for my ProIIe. don't know if he still has them.. My replacements were just last year, so there is a good chance he has more Quote Link to comment Share on other sites More sharing options...
RonC Posted January 20, 2021 Share Posted January 20, 2021 (edited) The original pots are Radiohm P20E, but they aren't available anymore. Paul used to have (or maybe still has) exact replacements for these. P20E.pdf Edited January 20, 2021 by RonC Quote Link to comment Share on other sites More sharing options...
funkgod Posted February 23, 2021 Share Posted February 23, 2021 (edited) i still have the original pots from my pro2E, pete said dump them and sent me some solid shaft ones like gray plastic you have to cut down slightly, i think i had to widen the holes slightly as well. Also done a number of jobs on my custom bass and for a few guys on here also, main problem when you get lack of punch and lowish power is the two electro caps by the transformer, if if goes dead completely or again intermittent on and off then there is an earth pin that goes right through the board to take it to the back of the board, i re soldered that and bingo, good as new, worth a check, what else,,,, oh yea the jack plug twisting when it becomes loose over the years of playing and it twists the button cap leg shorting out something and also if it twists so far the tip of the jack plug connector that shuts of the battery will shot out against the back tone pot steel laminate, so if loose make sure you tighten it as soon as, you can do a mod or get it done at wal if its the older wal to have the battery shut off on the pot ( turn and click for off) like the later ones. Just thinking about that, there is no reason you could not do that the the pro2E or 1E, so .... while you are fitting a new pot fit one with a master shut off switch also and switch out the earth ? save you taking the jack out and if like me you used one jack to the amp and the di to the desk then that would save you taking both out and looking for them when you go back on. 🙂 im sure paul could do something here. Edited February 24, 2021 by funkgod Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.