Sardonicus Posted July 5, 2020 Posted July 5, 2020 I hate soldering and was wondering if conductive adhesive glue would work instead when connecting pickup wires to pots 🤔 Does anybody have experience of using this? Quote
therealting Posted July 5, 2020 Posted July 5, 2020 Don’t do it. If you hate soldering, contact @KiOgon for a solderless harness. 2 Quote
rmorris Posted July 7, 2020 Posted July 7, 2020 tbh conductive adhesive is best avoided unless no other option. The stuff you buy - I haven't seen it for a while - for reparing rear screen heaters on cars etc is a bit of a nightmare in terms of success. Basically it 'goes off' and becomes not very conductive. I used to work at Penny & Giles (pro audio faders etc) and it was used on the faders as you can't solder to conductive plastic ink. But it was made in house before the production shift and used within a few hours. If you really don't want to solder but do want to DIY then imo you'd be better off with copper tape with a conductive adhesive backing. Best to solder though. 1 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.