Simon. Posted July 18, 2020 Posted July 18, 2020 I think these look great, and there has obviously been a lot of thought put in to the design. Thinking about the copper version, is there any mechanism to prevent bi-metallic corrosion? As @SpondonBassed mentioned, bridges can accumulate a lot of sweat and gunk...🤢 Quote
Sidlanir Posted July 20, 2020 Author Posted July 20, 2020 On 18/07/2020 at 14:27, Simon. said: I think these look great, and there has obviously been a lot of thought put in to the design. Thinking about the copper version, is there any mechanism to prevent bi-metallic corrosion? As @SpondonBassed mentioned, bridges can accumulate a lot of sweat and gunk...🤢 Hi, Yes I know that combining different materials, Aluminium, Stainless Steel & Copper, would created a good battery... but, honestly I didn't measured the voltage ... Having used high treated aeronautical raw materials, I don't know if corrosion will appear due to the accumulation of sweet... if this would be the case I'd replace the complete bridge for free with a new one... Quote
Pea Turgh Posted July 20, 2020 Posted July 20, 2020 2 hours ago, Sidlanir said: Is it just me or is there more sustain with your bridge as opposed to a standard one? 1 Quote
Sidlanir Posted July 22, 2020 Author Posted July 22, 2020 (edited) On 20/07/2020 at 21:22, Pea Turgh said: Is it just me or is there more sustain with your bridge as opposed to a standard one? Hi, it seems that only you & me hear more sustain with the new bridge... Honestly to me there is more sustain with the new bass bridge, by the way I received a lot of emails/ PMessenger, non constructive feedbacks: your bridge is ugly as sh..t , I will never buy your bridge I didnt hear more sustain, beacuse you use aluminium your bridge dosen't bring any new improvement to a bass You have copied the bridge from Jens Johnsen ( no under license) and much more... the list is too long & some feedbacks were very harsh... Anyway I'm a small Bass Builder from Luxembourg & doing the best I can & I'm proud of my results... Cheers from Luxembourg & many thanks to all of you from basschat for all your great feedback :)))) Edited July 22, 2020 by Sidlanir 4 Quote
Sidlanir Posted July 22, 2020 Author Posted July 22, 2020 (edited) New Bass bridge installed on my dummy Test PBass... If some of you don’t like it ,it’s still not the final design... Licensed by Jens Johnsen Patent : USA: 5,295,427 Germany: P4201438.1 Edited July 22, 2020 by Sidlanir Quote
Pea Turgh Posted July 22, 2020 Posted July 22, 2020 1 hour ago, Sidlanir said: Hi, it seems that only you & me hear more sustain with the new bridge... Honestly to me there is more sustain with the new bass bridge, by the way I received a lot of emails/ PMessenger, non constructive feedbacks: your bridge is ugly as sh..t , I will never buy your bridge I didnt hear more sustain, beacuse you use aluminium your bridge dosen't bring any new improvement to a bass You have copied the bridge from Jens Johnsen ( no under license) and much more... the list is too long & some feedbacks were very harsh... Anyway I'm a small Bass Builder from Luxembourg & doing the best I can & I'm proud of my results... Cheers from Luxembourg & many thanks to all of you from basschat for all your great feedback :)))) People are quick to criticise - always the way unfortunately. Keep up the good work! 1 1 Quote
SpondonBassed Posted July 22, 2020 Posted July 22, 2020 (edited) 4 hours ago, Sidlanir said: non constructive feedbacks Before the Internet, we used to call folk like that bar room orators. You know, like the bloke down the pub that knows more than everyone else but won't buy a round of drinks because he's on unemployment benefit...? It's all talk on their part. You have actually made something. Edited July 22, 2020 by SpondonBassed 4 1 Quote
ped Posted July 22, 2020 Posted July 22, 2020 5 hours ago, Sidlanir said: Hi, it seems that only you & me hear more sustain with the new bridge... Honestly to me there is more sustain with the new bass bridge, by the way I received a lot of emails/ PMessenger, non constructive feedbacks: your bridge is ugly as sh..t , I will never buy your bridge I didnt hear more sustain, beacuse you use aluminium your bridge dosen't bring any new improvement to a bass You have copied the bridge from Jens Johnsen ( no under license) and much more... the list is too long & some feedbacks were very harsh... Anyway I'm a small Bass Builder from Luxembourg & doing the best I can & I'm proud of my results... Cheers from Luxembourg & many thanks to all of you from basschat for all your great feedback :)))) I hope those feedbacks didn’t come from Basschat... I’d they did kindly add me into the conversations and I’ll happily dish out some sanctions. 1 1 Quote
Si600 Posted July 22, 2020 Posted July 22, 2020 Could you do them in black? Black anodised 5er with copper "saddles"? Asking for a friend.... Quote
Sidlanir Posted July 22, 2020 Author Posted July 22, 2020 59 minutes ago, Si600 said: Could you do them in black? Black anodised 5er with copper "saddles"? Asking for a friend.... Yes , but this will be done out of titanium... my manufacturer can do a lot of differents cool colors... Quote
Sidlanir Posted July 22, 2020 Author Posted July 22, 2020 3 hours ago, SpondonBassed said: Before the Internet, we used to call folk like that bar room orators. You know, like the bloke down the pub that knows more than everyone else but won't buy a round of drinks because he's on unemployment benefit...? It's all talk on their part. You have actually made something. Yes , well said ! Many thanks for your feedback ,comments & support ! 1 Quote
Sidlanir Posted July 22, 2020 Author Posted July 22, 2020 2 hours ago, ped said: I hope those feedbacks didn’t come from Basschat... I’d they did kindly add me into the conversations and I’ll happily dish out some sanctions. Hi, no one from Basschat ... I was only kicked out from another forum & as I'm also on FB a lot of people are only arging about my design and much more, anyway the next bridge & final version will be smoother .... Many thanks to all members of BASSCHAT , fantastic forum, nice & polite members !!!! I'm very honored to be part of this forum! Alberto 3 1 Quote
SpondonBassed Posted July 22, 2020 Posted July 22, 2020 24 minutes ago, Sidlanir said: fantastic forum, nice & polite members !!!! It will be quite a different story after your cheque has cleared though... Heeheehee Cheers Bert. 1 Quote
Sidlanir Posted July 24, 2020 Author Posted July 24, 2020 Dear all, here the final design of the EVO-4 Bass Bridge Weight: 145 grams Licensed by Jens Johnsen Patent : USA: 5,295,427 Germany: P4201438.1 4 Quote
stewblack Posted July 24, 2020 Posted July 24, 2020 Congratulations on a great design. Have you changed the material of the intonation tubes? 1 Quote
Sidlanir Posted July 30, 2020 Author Posted July 30, 2020 On 25/07/2020 at 00:29, stewblack said: Congratulations on a great design. Have you changed the material of the intonation tubes? No the material will be the same.. aluminium & later on titanium... 1 Quote
fleabag Posted July 30, 2020 Posted July 30, 2020 What a beautiful looking bridge. Excellent work, and very unique looking. 1 Quote
Sidlanir Posted August 1, 2020 Author Posted August 1, 2020 On 30/07/2020 at 19:27, fleabag said: What a beautiful looking bridge. Excellent work, and very unique looking. Many thanks, hope the bass world will accept this new Bass bridge 😉 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.