Jump to content
Why become a member? ×

SOLD Tech 21 Bass Fly Rig on Pedal board with Fuel Tank
£215
Hereford


vmaxblues
 Share

Recommended Posts

My back up gig board, these are superb units, I added a nano board and T-Rex power supply.

Might split, but it would be a pity.

Great very versatile little unit that sounds immense.

Full Description

Sansamp

The Tech 21 Bass Fly-Rig features a unique Character control that sweeps through the most storied vintage and modern tones. Three-band active EQ provides professional grade tweakability for any situation or gig. Add dirt and grind with the flick of a switch, and also add distortion by engaging the Pre-Boost.

Octafilter

The Octafilter feature offers an entire re-invented pallette of expression with a crazy amount of possibilities and features, from Minimoog®-style synth to funky town. The controls interact so that you can get dynamically-filtered clean, fuzz, and octave, as well as octave and fuzz together. When Q is at minimum, the range becomes a high-cut tone filter for different versions of clean, fuzz, octave, and octave and fuzz together. In addition you can then blend any of these combinations with your direct signal via the Mix control.

Chorus

The Chorus feature adds choral voicings of two instruments which was originally taken from Sansamp Bass Boost Chorus pedal. This feature also adds thickness and space, for a truly great sound.

Switchable Pre/Post Boost

This Pre-Boost mode enables you to interact with the SansAmp section to build up drive and distortion. In addition, the Post-Boost mode increases the overall volume to punch up fills and solos.

Chromatic Tuner

A simple and easy-to-use Chromatic Tuner. Simply hold down the CHR footswitch to engage the Tuner, which simultaneously mutes the signal path and allows you to tune your instrument without being heard.

With all these great features the Tech 21 Bass Fly-Rig is a compact unit, which can easily fit into an instrument case.

Features

  • Headphone button switches the 1/4” output into headphone mode
  • 1/4-inch 4.7megOhm input to deliver the full sound of piezos
  • Input Pad for active basses
  • XLR output with ground connect
  • 1/4-inch low impedance output
  • Rugged, all-metal housing
  • Metal footswitches and jacks
  • Silent-switching, custom footswitch actuators
  • Utilises included 9V, 200mA DC power supply.
  • Actual size: 12.5”l x 2.5”w x 1.25”h
  • Weight: 20.7 oz.

IMG_2265.jpg

IMG_2266.jpg

IMG_2271.jpg

IMG_2272.jpg

IMG_2273.jpg

IMG_2274.jpg

Edited by vmaxblues
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...