JonnyBGood Posted August 18, 2020 Share Posted August 18, 2020 Not entirely happy with my new Squier Affinity PJ bass tone, which I bought for some recordings only and intending to record direct to interface. Before I ask about possible pickup upgrades elsewhere on the forum, I'd be grateful if you guys that record with P basses could have a listen to this recording to help me rule out any possible recording errors on my part. The dry recording is P pickup only, tone wide open, played with pick between the P and J pickups, recorded direct to Scarlett interface @ 24/44.1 (inst. level), with zero post processing, fresh Ernie Ball Slinkys. I'm not a recording noob (though its been a long time since I recorded bass) so I'm pretty sure there's nothing amiss with the recording - but asking here just in case I am about to have a forehead slap moment. To my ears this sounds really dead, muddy and muffled. Is this what I should expect from a typical P bass recorded dry, or from a Squier? Wet track has a shitload of EQ and is approaching something acceptable for me. Thoughts? Dry.mp3 Wet.mp3 Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted August 18, 2020 Share Posted August 18, 2020 (edited) Disclaimer : I'm a drummer, and quite (no, very...) old, with duff hearing. Of those two tracks, however, I hear nothing amiss. I'd be surprised to hear the sound of the 'wet' track recorded 'dry' from a 'P' bass. If that's the sound you're after, carry on with the '*-load' of EQ; there's no problem with that. The 'dry' sound is a perfectly reasonable, dry (d'uh..!) bass, played with a pick, max tone and DI'ed with no amp. It's certainly not 'dead', 'muddy' nor 'muffled'. What are you monitoring through..? Just my tuppence-worth, subject to completion, correction and/or contradiction from others. Edited August 18, 2020 by Dad3353 1 Quote Link to comment Share on other sites More sharing options...
JonnyBGood Posted August 18, 2020 Author Share Posted August 18, 2020 43 minutes ago, Dad3353 said: Disclaimer : I'm a drummer, and quite (no, very...) old, with duff hearing. Of those two tracks, however, I hear nothing amiss. I'd be surprised to hear the sound of the 'wet' track recorded 'dry' from a 'P' bass. If that's the sound you're after, carry on with the '*-load' of EQ; there's no problem with that. The 'dry' sound is a perfectly reasonable, dry (d'uh..!) bass, played with a pick, max tone and DI'ed with no amp. It's certainly not 'dead', 'muddy' nor 'muffled'. What are you monitoring through..? Ok, thanks for that. I should say I'm not aiming to get my wet sound straight from the pickup, but maybe more in that direction? I have this clanky Precision sound in my head and the dry recording seemed an awfully long way from it. Perhaps I need to lower my expectations of what is normal for DI bass. My studio monitors are Tannoy Reveal, cans are Beyer DT770. Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted August 18, 2020 Share Posted August 18, 2020 Lower away, Jonny; lower away. Quote Link to comment Share on other sites More sharing options...
ahpook Posted August 18, 2020 Share Posted August 18, 2020 1 hour ago, JonnyBGood said: Ok, thanks for that. I should say I'm not aiming to get my wet sound straight from the pickup, but maybe more in that direction? I have this clanky Precision sound in my head and the dry recording seemed an awfully long way from it. Perhaps I need to lower my expectations of what is normal for DI bass. My studio monitors are Tannoy Reveal, cans are Beyer DT770. Perhaps lowering your strings and not your expectations would help ? It sounds OK to me, but I'm not a P-bass player. If it's clank you want then a bit more string-fret noise might be what's missing. I know if there's not some of that going on with my basses I think they sound a bit lifeless. YMMV 1 Quote Link to comment Share on other sites More sharing options...
Elfrasho Posted August 19, 2020 Share Posted August 19, 2020 (edited) Sounds fine to me. Doesn't sound muffled to my ears. The tone is a bit lifeless though so I'd be sticking it through an amp sim. Edited August 19, 2020 by Elfrasho 1 Quote Link to comment Share on other sites More sharing options...
Elfrasho Posted August 19, 2020 Share Posted August 19, 2020 Also. Remember not to eq to just the bass in solo. 1 Quote Link to comment Share on other sites More sharing options...
Nobatron Posted August 19, 2020 Share Posted August 19, 2020 Sounds like a normal P bass recorded dry to me. An amp sim would probably get you closer to where you want to be. If you haven't already you should grab the free Amplitube SVX SVT sim whilst it's still available. 1 Quote Link to comment Share on other sites More sharing options...
JonnyBGood Posted August 19, 2020 Author Share Posted August 19, 2020 OK many thanks for listening and input guys, that's unanimous & just what I needed to rule out any recording issues. 14 hours ago, ahpook said: Perhaps lowering your strings and not your expectations would help ? It sounds OK to me, but I'm not a P-bass player. If it's clank you want then a bit more string-fret noise might be what's missing. I know what you mean but my action is already about 2.5-2mm, as low as it will go without lots of buzzing (with current strings) which is not what I want. 46 minutes ago, Nobatron said: Sounds like a normal P bass recorded dry to me. An amp sim would probably get you closer to where you want to be. If you haven't already you should grab the free Amplitube SVX SVT sim whilst it's still available. I thought about an amp sim, saw that thread and actually tried to install this a few days ago, I had several problems with the installation and registration procedure and eventually gave up as I couldn't be bothered to raise a ticket thru their customer support process. Maybe I'll revisit this one, I think you're probably right that my ears want to hear an amp & miked up cab. 1 Quote Link to comment Share on other sites More sharing options...
radiophonic Posted August 19, 2020 Share Posted August 19, 2020 Sounds exactly like a DI to me. Blend with a cab for more life or use a sim if that's not possible. Just watch the phase of the two signals and be prepared to time align. The riff sounded like New Model Army?. 1 Quote Link to comment Share on other sites More sharing options...
JonnyBGood Posted August 19, 2020 Author Share Posted August 19, 2020 28 minutes ago, radiophonic said: Sounds exactly like a DI to me. Blend with a cab for more life or use a sim if that's not possible. Just watch the phase of the two signals and be prepared to time align. The riff sounded like New Model Army?. Thanks and yes it was! Quote Link to comment Share on other sites More sharing options...
skidder652003 Posted August 19, 2020 Share Posted August 19, 2020 44 minutes ago, JonnyBGood said: OK many thanks for listening and input guys, that's unanimous & just what I needed to rule out any recording issues. I know what you mean but my action is already about 2.5-2mm, as low as it will go without lots of buzzing (with current strings) which is not what I want. I thought about an amp sim, saw that thread and actually tried to install this a few days ago, I had several problems with the installation and registration procedure and eventually gave up as I couldn't be bothered to raise a ticket thru their customer support process. Maybe I'll revisit this one, I think you're probably right that my ears want to hear an amp & miked up cab. as per another thread I started, maybe give this a go? Free to demo, costs about £8 to buy https://www.2getheraudio.com/effects/rich/ Quote Link to comment Share on other sites More sharing options...
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.