SpondonBassed Posted October 6, 2020 Share Posted October 6, 2020 Striking combination of grain and ash detail. Very nice. 1 Quote Link to comment Share on other sites More sharing options...
songofthewind Posted October 6, 2020 Share Posted October 6, 2020 This is looking absolutely first class! 1 Quote Link to comment Share on other sites More sharing options...
GarethFlatlands Posted October 6, 2020 Share Posted October 6, 2020 Unfollowing this thread, your bass already makes mine look like it was put together by a blindfolded golden retriever 😬 4 Quote Link to comment Share on other sites More sharing options...
HazBeen Posted October 7, 2020 Share Posted October 7, 2020 20 hours ago, TheGreek said: That Wenge looks amazing - I don't think I've seen such heavily figured Wenge before. May be because I've only seen it for necks. Looking good. Agree, it is absolutely stunning pattern. Quote Link to comment Share on other sites More sharing options...
spacecowboy Posted November 24, 2020 Author Share Posted November 24, 2020 So a decent amount of time has passed since my last update, let's blame, work, life and Covid! So while I kinda liked the build up to a point I didn't like it enough to not just ditch it and start again... I know, It's just me, it's how I am, If I'm not happy I start again. So I had this timber, luckily quite a bit of it was off cuts or pieces I had around so it wasn't an expensive restart. I absolutely love the figuring on this Wenge block I had, but I want this bass to be more understated than that, so I used the more straight grain. A lot simpler in it's appearance. I got the wood for the neck planed up and checked the fit, it's my fave looking lamination of Wenge and Ovangkol. Originally in this photo I have used Ovangkol as the sandwich between the two wenge wings, this was then removed and I replaced it with Swamp Ash. This piece of Purpleheart I machined for the pickup cover was absolutely lovely, but again far too flashy for this build so it was benched for another build at a later time. I placed these inlays to indicate the centre of the pickups underneath, i'll do this on the final pickup cover I make too. So this is the bass with the swamp ash sandwich, and you can see on this picture the pickup cover is WAY OTT! This is also the hardware I have pulled together for the build, I got some lovely old brass Schaller tuners and I managed to get a period matching Schaller bridge and Schaller strap locks! I have gold knobs that'll sit on an old very cool EMG BTC circuit with EMG J5 pickups. I will be using brass fret wire and using brass for the fret markers. I will also be using string trees due to no angle on the headstock. Just don't look at the floor Testing the hardware on the body, really love the look of the gold / brass hardware. Brass frets and inlays installed on the fingerboard, might not do top dots... might do them too... I know I should get a brass nut however the Warwick one (which is pretty much the only nut I really like) is too much money right now so this black one will do, I'm planning two string trees, think the B string is going to rip the top string tree out though... might need to test that. I'm taking some inspiration from Ritter on the placement of the jack on this bass and it will be mounted to the back of the control plate. Spot the 10 bolt holes too! Got some lovely brass inserts for the brass screws that'll hold the neck in place. It's almost done from a building point of view, just the new pickup cover to machine and then final sanding and finishing, will be using Tung Oil and Wax again as the wenge loves that! This is the block I'm using for the pickup cover, I had two pieces of Wenge i profiled down and glued them up, will just route the insides out of this and then it'll need profiling and then sanding! Cheers everyone. 5 Quote Link to comment Share on other sites More sharing options...
spacecowboy Posted November 24, 2020 Author Share Posted November 24, 2020 Oh I also got a new router... turns out my little palm router I was using was absolute JUNK, even with it's larger plunge base attachment. I bought a Bosch router during an amazon sale and it is a million times better, so all the routing on the body has gone without a single problem! Maybe I don't hate routers after all! 1 Quote Link to comment Share on other sites More sharing options...
eude Posted November 24, 2020 Share Posted November 24, 2020 15 minutes ago, spacecowboy said: That is STUNNING! 1 Quote Link to comment Share on other sites More sharing options...
TheGreek Posted November 24, 2020 Share Posted November 24, 2020 Love the sound of the gold/brown colour palette.... ...but screws in the control panel cover??? Surely you want magnets as per the @Andyjr1515 builds Quote Link to comment Share on other sites More sharing options...
spacecowboy Posted November 24, 2020 Author Share Posted November 24, 2020 Yeah I used magnets in my last build and they work brilliantly, I just really fancied using some brass screws on this one I'm rarely ever back in to the cavity to fiddle so the time it takes to unscrew the 3 screws isn't so bad Quote Link to comment Share on other sites More sharing options...
HazBeen Posted November 24, 2020 Share Posted November 24, 2020 Nice work so far, the wenge is really lovely and it will surely have an aggressive bark when complete. 1 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted November 24, 2020 Share Posted November 24, 2020 48 minutes ago, spacecowboy said: Yeah I used magnets in my last build and they work brilliantly, I just really fancied using some brass screws on this one I'm rarely ever back in to the cavity to fiddle so the time it takes to unscrew the 3 screws isn't so bad It's looking great You are quite correct to use screws. Magnets will hold a wood cover, but not the weight and pull of a jack as well 2 Quote Link to comment Share on other sites More sharing options...
eude Posted January 27, 2021 Share Posted January 27, 2021 Any updates on this?... Quote Link to comment Share on other sites More sharing options...
spacecowboy Posted January 27, 2021 Author Share Posted January 27, 2021 1 hour ago, eude said: Any updates on this?... Hey! No not on this bass... I am however working on a new bass design and new build, it has no diary just yet, but I will post something at some point, I just didn't want to put energy in a diary that ended up like this one i'm very bad for changing my mind all the time, this one might be finished at a later date, but the new build is going very nicely so far! fingers crossed! 1 Quote Link to comment Share on other sites More sharing options...
eude Posted January 27, 2021 Share Posted January 27, 2021 45 minutes ago, spacecowboy said: Hey! No not on this bass... I am however working on a new bass design and new build, it has no diary just yet, but I will post something at some point, I just didn't want to put energy in a diary that ended up like this one i'm very bad for changing my mind all the time, this one might be finished at a later date, but the new build is going very nicely so far! fingers crossed! That's a shame, I was REALLY digging this one, the shape and ramp in particular (not so much the gold hardware though ) Either way, excited to see what you've come up with next! Eude Quote Link to comment Share on other sites More sharing options...
spacecowboy Posted January 27, 2021 Author Share Posted January 27, 2021 2 hours ago, eude said: That's a shame, I was REALLY digging this one, the shape and ramp in particular (not so much the gold hardware though ) Either way, excited to see what you've come up with next! Eude Thank you mate. The new build is coming along really nicely, don't want to jinx it just yet, but the body is almost all done and I'll be looking to cut and shape the neck this week, so depending on how well that comes out I'll get something posted up 1 Quote Link to comment Share on other sites More sharing options...
songofthewind Posted January 27, 2021 Share Posted January 27, 2021 Nice job! 1 Quote Link to comment Share on other sites More sharing options...
HazBeen Posted January 27, 2021 Share Posted January 27, 2021 Fickle as feck these builders 😳😎😂 2 Quote Link to comment Share on other sites More sharing options...
eude Posted January 28, 2021 Share Posted January 28, 2021 On 27/01/2021 at 13:12, spacecowboy said: Thank you mate. The new build is coming along really nicely, don't want to jinx it just yet, but the body is almost all done and I'll be looking to cut and shape the neck this week, so depending on how well that comes out I'll get something posted up SO what's become of this bass? I genuinely love that shape and the ramp idea too. Just don't turn it into firewood please!? Eude 1 Quote Link to comment Share on other sites More sharing options...
spacecowboy Posted January 28, 2021 Author Share Posted January 28, 2021 This seems to be where I left it, so almost done, but I'm all about my new build currently, hopefully can share soon! Got the fingerboard gluing to the neck now! 6 Quote Link to comment Share on other sites More sharing options...
eude Posted January 28, 2021 Share Posted January 28, 2021 Well that's a bit sexy! Thank you so much for sharing matey. Looking forward to seeing this one finished up and course the new build Eude 1 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted January 28, 2021 Share Posted January 28, 2021 Wow! Quite something 1 Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted January 28, 2021 Share Posted January 28, 2021 (edited) 2 hours ago, spacecowboy said: This seems to be where I left it, so almost done, but I'm all about my new build currently, hopefully can share soon! Got the fingerboard gluing to the neck now! I like most of it. What stops me in my tracks is the brass wood screws. I understand that using ten fasteners means you don't need the same tightening torque as you would with fewer of them. Nevertheless, brass screws with plain slot heads are a bit arty-farty, if you will forgive me for saying. Even if they're goldie looking mild steel, they're a poor choice just to keep everything to a colour scheme. You can buy internal wrenching coloured stainless steel screws here for example. Edited January 28, 2021 by SpondonBassed 1 Quote Link to comment Share on other sites More sharing options...
spacecowboy Posted January 28, 2021 Author Share Posted January 28, 2021 Ah shame, I think they look great. 1 Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted January 28, 2021 Share Posted January 28, 2021 31 minutes ago, spacecowboy said: Ah shame, I think they look great. I agree. They fit with the overall look but I'm an engineer. They don't sit comfortably with me. Are they brass? Do you have them lacquered to slow the tarnishing effect? Quote Link to comment Share on other sites More sharing options...
Richard R Posted January 28, 2021 Share Posted January 28, 2021 That's very nice indeed! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.