Zoom pedal hack - anyone tried it yet?

[LukeFRC]

On 21/09/2023 at 07:36, andruca said:

RainSel (like the LineSel but with a dry/wet balance when on)

question for you - but how does this work?
Could you do something  like full wet reverb into bit crusher on the trails..., and then into this to act as the master dry wet blend? 

[Pea Turgh]

Just having another pop at getting the effects manager up & running.  Neither my new Mac Mini nor my very old W10 laptop will allow the program to open.  Dang.  Is it because it’s Russian, and MI6 are preventing me from using it? 🤡

[ratman]

I remember the V1 not working at all for me but V2 worked fine, if that helps.

[andruca]

V2 works fine. Windows will just just ask you to exhaustion if it's legit, but it should run.

[andruca]

On 09/02/2024 at 11:55, LukeFRC said:

question for you - but how does this work?
Could you do something  like full wet reverb into bit crusher on the trails..., and then into this to act as the master dry wet blend? 

 

I haven't tried the RainSel, but AFAIK, when you use the stock LineSel effect you just bypass the rest of the chain (after the LineSel) when it's on. With the RainSel it's the same, you just have 2 extra parameters to blend in dry signal (from the input) and wet signal (so far int he chain, remember everything after the RainSel is bypassed). The stock LineSel is simply ment to do the bypassing. You get your sound, as wet as it might be right before the LineSel.

Edited February 14, 2024 by andruca

[LukeFRC]

On 14/02/2024 at 11:32, andruca said:

 

I haven't tried the RainSel, but AFAIK, when you use the stock LineSel effect you just bypass the rest of the chain (after the LineSel) when it's on. With the RainSel it's the same, you just have 2 extra parameters to blend in dry signal (from the input) and wet signal (so far int he chain, remember everything after the RainSel is bypassed). The stock LineSel is simply ment to do the bypassing. You get your sound, as wet as it might be right before the LineSel.

So I've a MS70cdr and just tried it out...

 

Stick it at the end of your chain and you can turn off the whole chain (as per LineSel) .... 
Turned on you can blend clean into effected...

So run a delay into a reverb into a bit crusher - full wet.... and then add the clean in at the end! 

[wannabebass]

Hello Zoom Geniuses!

I recently received a G3 and successfully installed a harmonica patchset from Richard Hunter (hunterharp.com).  I also play bass - I believe what I'm seeing on this thread is that it is NOT possible to load bass effects onto the G3....but I am still holding out hope...

 

Can someone confirm if this is possible or not?

 

Many thanks

 

Andy

[funkydoug]

That’s my understanding. It is possible on the G3n, but not the G3.

 

Enjoy it none the less, I am sure there are  settings that will sound good for bass.