Jump to content
Why become a member? Ɨ

Recommended Posts

Posted (edited)

Excellent condition CM47 tube mic, complete with power supply,Ā shockmount, cables, windshield & case. Superb sounding mic on double bass & bass cabinets. My other halfĀ has alsoĀ used it on her tenor sax for a few albums. Selling as upgrading to another Advanced Audio mic.

Ā 

Info fromĀ Advanced's website-

Advanced Audio CM47

The Advanced Audio CM47 is a large dual-diaphragm, multi-pattern, tube condenser microphone inspired by the famous U47. The CM47 is a great choice for vocals, saxophones, acoustic instruments, and excels in front of bass and guitar amps.

Capsule

The Advanced Audio CM47 features our very accurate and smooth AK67 capsule, a 35mm capsule with 6-micron-thick German mylar diaphragms. Its frequency response falls between those of the U47 and U67 vintage tube microphones.Ā  The AK67 capsule goes down another ½ octave before rolling out, compared to the K47 capsule.Ā  The CM47 also has more ā€œairā€ or ā€œsizzleā€ above 10kHz, allowing it to cut more easily through busy mixes without adding EQ.

Circuit

The circuit is based on the very hifi 6072 tube optimized with a two-stage Class A design.Ā 

This circuit provides a much lower output impedance with more headroom than the circuit used in the original U47. The lower output impedance provides a faster damping factor when driving the BV8 type transformer, delivering a better transient response than the original design.

Selected 6072a tubes are some of the quietest tubes made, and are much less susceptible to microphonics than the metal-clad vf14 tubes used in the original U47 tube microphone.

The dual-bobbin output transformer with its hum bucking configuration and our optimized circuit will deliver +20dBu with less than 1% distortion.

The output transformer is driven with a 2.2 ufd metal-film capacitor to take advantage of the transformer’s response down to 10Hz.

Specifications:Ā 

  • 1.07ā€ (35mm) dual 6-micron German mylar diaphragm AK67 capsule
  • 9 selectable pickup patterns remotely switched from the power supply
  • Dual bobbin BV8 (6.5:1 ratio) output transformer
  • 6072a tube Class A dual stage (CCDA)
  • Frequency response: 25Hz to 20kHz +/–3dB
  • Noise: -17dB (A-weighted)
  • Impedance: < 200 ohm
  • Distortion: < 0.5% @128dB
  • Output: +20dBu with less than 1% distortion into 1.2K load
  • Robust shock mount that threads onto microphone bod
  • Flight case.

Tape Op review atĀ https://tapeop.com/reviews/gear/71/cm-47-large-diaphragm-tube-mic/

Ā 

Ā 

Edited by chrkelly
Sold
  • Like 1
  • MB1 locked this topic
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Ɨ
Ɨ
  • Create New...