bumnote Posted October 20, 2020 Share Posted October 20, 2020 Any advice please. How can I get the tuning key straightened without cracking the chrome? Does anyone know who made the tuner. Its from a Rickenbacker 4001 C64 so its not the normal type tuner. Rick resource told me they cant be bought and despite buying a new real Rick bass I get no response from Rick themselves so if I could find who made it i might be able to beg for a spare. Thanks Quote Link to comment Share on other sites More sharing options...
Baxlin Posted October 20, 2020 Share Posted October 20, 2020 Ouch! Have you tried straightening? The reason I ask is that if bending it didn’t crack the chrome...... Alternatively could it be dismantled, straightened, and rechromed? (Possibly not, though, as it seems to be riveted together.) Quote Link to comment Share on other sites More sharing options...
ikay Posted October 20, 2020 Share Posted October 20, 2020 Probably made by Schaller to Ric specs. Hipshot do a Ric replacement tuner which is very similar but doesn't have vintage features such as the paddle rivet and the large slot screw on the cog. https://hipshotproducts.com/products/hb5-bass-tuning-machine Quote Link to comment Share on other sites More sharing options...
BlueMoon Posted October 20, 2020 Share Posted October 20, 2020 That's a shame. It looks from the pics as if it is the base of the cloverleaf that has taken most of the stress. If a direct replacement of the whole tuner cannot be sourced, maybe try to see if another cloverleaf could be inserted and re-riveted. Good luck and keep us posted, please. Quote Link to comment Share on other sites More sharing options...
songofthewind Posted October 20, 2020 Share Posted October 20, 2020 I think it should be possible to drill out the rivet from the non-head side. Cautious use of a rubber or nylon headed hammer should suffice to flatten the cloverleaf. The chrome plating will not withstand blows from a steel head hammer. I’m a bit stumped about where and how to get it riveted, again. Quote Link to comment Share on other sites More sharing options...
itu Posted October 20, 2020 Share Posted October 20, 2020 Drill the rivet. Use pieces of wood on both sides and put the bent end of the leaf to a vise. Use the vise to bend the leaf slowly to shape. Use some tiny screw (and a nut) to set the leaf back to the axle. You can also make a thread to the axle if you have proper tools and a suitable screw. Quote Link to comment Share on other sites More sharing options...
stevel Posted October 20, 2020 Share Posted October 20, 2020 Or get a used one.... search for ‘Kluson’ tuners. For example: https://reverb.com/au/item/1733855-gibson-kluson-ebo-bass-tuners-60s-chrome Quote Link to comment Share on other sites More sharing options...
Dan Dare Posted October 20, 2020 Share Posted October 20, 2020 I've managed to straighten a bent Fender cloverleaf tuner with Mole grips. Clamp the shaft in a small vice, protect the face of the clover leaf with thin card, clamp on the Mole and gently bend it straight. Best to ignore the advice above that includes the word "hammer", imho. 1 Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted October 20, 2020 Share Posted October 20, 2020 (edited) Give it a go straightening... remove the peg from the housing first... Any motorcycle machine type engineering shops your way? Hold the leaf in a vice with soft jaws, bit of tube over the pin, maybe a lick of heat may help? Nothing realy to lose, if you had to get a replacement any howz... CD Guitars or WD Music? Edited October 20, 2020 by PaulThePlug Quote Link to comment Share on other sites More sharing options...
Skybone Posted October 20, 2020 Share Posted October 20, 2020 Try: https://www.rickysounds.co.uk/product-category/keywinds/ https://www.soundaffects.com/accessories-c59/guitar-parts-c63/rickenbacker-bass-machinehead-set-4001-4003-5000550-p2025 https://www.soundaffects.com/accessories-c59/guitar-parts-c63/single-bass-machinehead-4001-4003-5000550-p3710 Or just carefully try and bend it back. Quote Link to comment Share on other sites More sharing options...
itu Posted October 20, 2020 Share Posted October 20, 2020 Rick Tuner, he's a known American luthier? I'll... get my coat... Quote Link to comment Share on other sites More sharing options...
bumnote Posted October 20, 2020 Author Share Posted October 20, 2020 Wow some great advice, thanks, ill get on it at the weekend Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.